# Linux Newbies should check DOCs/Installers and if still necessary
# http://www.heby.de/ltmodem for already available driver installers

# Together with information included in DOCs/,
# this report may enable you to solve problems.
# But if further help is needed  send BLDrecord.txt to discuss@linmodems.org
# Please use as the the following as the email Subject:
# Lucent DSP modem, redhat-release Red Hat Linux release 7.2 (Enigma) kernel 2.4.7-10
DISTRO=redhat-release
DISTR=redhat
DVERSION=Red Hat Linux release 7.2 (Enigma)
COMMAND=./build_module
WHOAMI=root
2002年  4月 29日 月曜日 13:18:07 JST
SYS=2.4.7-10
Linux nakajimak 2.4.7-10 #1 Thu Sep 6 17:27:27 EDT 2001 i686 unknown

LSPCI=/sbin/lspci
MODEM_ID=11c1:045c
	IDs of supported modems
LUCENT 0x11c1          0x0440-0x045c   
XIRCOM 0x115d          0x0000-0x000F   
XIRCOM 0x115d          0x0440-0x045c   
XIRCOM 0x115d          0x0010-0x03ff   

----------------------------------------------
00:09.1 Serial controller: Lucent Microelectronics: Unknown device 045c (prog-if 00 [8250])
	Subsystem: Intel Corporation: Unknown device 2201
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 3470 [size=8]
	Region 1: Memory at 41280000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-

----------------------------------------------
IRQ=11
Compiling appears necessary, as a candidate installer is not evident.
BASE=source
# ===SETTINGS===
LT_SERIAL_MODULE="lt_serial"
LT_PROPRIETARY_MODULE="lt_modem"
DOCS="1ST-READ CHANGELOG UPDATES-BUGS DOCs utils"
LT_VERSION="6.00c2"

checking whether we are using GNU C... yes
  using /usr/src/linux-2.4.7-10
  kernel headers are version 2.4.7-10
ls -l /usr/src/linux
HEADERS_IN=/usr/src/linux-2.4.7-10
MODVERH=yes

Next checking utilty versions, with ranges
           Version_min 
 Utility    or range for kernels   
   name     2.2.16       2.4.18          Actual_version   
Gnu C      2.7.2.3      2.95.3-2.9.99   2.96
Gnu make   3.79.1       3.77            3.79.1
binutils   2.8.1.0.23   2.9.1.0.25      2.11.90.0.8


-rw-r--r--    1 root     root       416149  4月 29 13:18 lt_modem.o
-rw-r--r--    1 root     root        28912  4月 29 13:18 lt_serial.o
DEPMOD=/sbin/depmod
EXTRAMOD=
succeeded:  /sbin/depmod -e lt_modem.o
succeeded:  /sbin/depmod -e lt_modem.o  lt_serial.o


#===== ./ltinst2 section =====

LT_MODEM=/lib/modules/2.4.7-10/kernel/drivers/char/lt_modem.o
LT_SERIAL=/lib/modules/2.4.7-10/kernel/drivers/char/lt_serial.o

DEPMOD_LT_NEW=passed

The drivers can be removed from the modules search PATH with:	 ./ltuninst2
 
#===== autoload section=======
DEVFS=
DEV_MODEM_LINK_ORIG=
ENVIR=autoload
   DEVICE_NODE=/dev/ttyLT0
SYM_LINK1=/dev/modem
With permissions to group: dialout
 
MCFILE=/etc/modules.conf

UPDATE_MOD=depmod -a
DEPMOD_A=passed

The following block has been written to /etc/modules.conf:
 /etc/modules.conf
# lt_drivers: autoloading and insertion parameter usage
alias char-major-62 lt_serial
alias /dev/tts/LT0 lt_serial
alias /dev/modem lt_serial
# The next line is a syntax example, rarely needed, to automate parameter usage during lt_drivers insertion. See documentation for details 
# options lt_modem vendor_id=0x115d device_id=0x0420 Forced=3,0x130,0x2f8
# section for lt_drivers ends