 |
≫ |
|
|
|
| 13-APR-07, revised 09-AUG-07 |
|
 |
本ソフトウェアが対応するのは主に ProLiantファミリーの 300/500/700シリーズと Bladeシリーズになります。但し、これらの全てのシリーズでサポートしている訳ではありません。詳細な対応情報、またダウンロードについては、本ソフトウェアが同梱されている ProLiant Support Pack(PSP)の  v7.80ページをご覧ください。 |
 |
本ページでは、管理ツールに関する技術情報について記述いたします。製品情報については こちらをご覧ください。 |
- PSP 7.80に同梱されている SMH v2.1.8-177の次のバージョンとして SMH v2.1.9-178がリリースされました。
|
- [2.1.9-178] VMware ESX Serverをサポートしました
- [2.1.9-178] Red Hat EL3のサポートが削除されました
- [2.1.8-177] Red Hat EL5をサポートしました
- [2.1.8-177] SLES10で、4Gb Fibre(Emulex)コントローラ利用時に、SMHの使用が可能になりました
|
- 現時点に於いて、本ソフトウェアは Xen環境上ではサポートされません。
- 現在、RHEL5用 Emulex driverは未リリースです。RHEL5用 QLogic Driverについてはこちらをご覧ください。
- RHEL5でテストトラップを送信する場合、/etc/sudoers で hpsmhユーザの requirettyフラグを offにする必要があります。
- RHEL4/U5の場合、hpsmhにアクセスするとシステム情報取得処理がタイムアウトでエラーになります。詳細と回避策はIMAの技術情報をご覧ください。
|
|
・Red Hat Enterprise Linux 3 AS&ES/x86 (2.4.21-9以降)
v2.1.9-178 は RHEL3 をサポートしません
・Red Hat Enterprise Linux 3 AS&ES/x86_64 (2.4.21-15以降)
v2.1.9-178 は RHEL3 をサポートしません
・Red Hat Enterprise Linux 4 AS&ES/x86 (2.6.9-5以降)
・Red Hat Enterprise Linux 4 AS&ES/x86_64 (2.6.9-5以降)
・Red Hat Enterprise Linux 5/x86 (2.6.18-8以降)
・Red Hat Enterprise Linux 5/x86_64 (2.6.18-8以降)
・SUSE Enterprise 9/x86 (2.6.5-7.97以降)
・SUSE Enterprise 9/x86_64 (2.6.5-7.97以降)
・SUSE Enterprise 10/x86 (2.6.16.21-0.8以降)
・SUSE Enterprise 10/x86_64 (2.6.16.21-0.8以降) |
|
サポートされるハードウェアは下記をご覧ください。
DL365、DL385G2、DL585G2、BL465c、BL685cはリストにありませんが、サポートされます。 |
- Internet Explorer 6.0, 7.0
- Mozilla 1.5, 1.6, 1.7
- Firefox 1.0.2, 1.5.0.1
|
|
# rpm -ivh hpsmh-x.x.x-xxx.linux.i386.rpm
Preparing... ########################################### [100%]
Detected Red Hat Enterprise Linux AS/ES/WS/SERVER 4
Creating hpsmh user and group...
1:hpsmh ########################################### [100%]
***********************************************************
* System Management Homepage installed successfully with *
* default configuration values. To change the default *
* configuration values, type the following command at *
* the root prompt: *
* *
* perl /usr/local/hp/hpSMHSetup.pl *
* *
***********************************************************
Stopping hpsmhd:
Starting hpsmhd:
...
[ OK ]
# |
|
アクセス権等の設定は下記の方法で行えます。
複数のネットワークインターフェースの一部だけに SMHを利用させたい場合に有効な機能です。設定は下記のメニューで行えます。この機能は Apacheの listenディレクティブを利用しています。詳細は こちらをご覧ください。
|
# perl /usr/local/hp/hpSMHSetup.pl
-------------------------------------------------------------------------------
|
Welcome to the Setup Wizard for the HP System Management HomePage 2.1.9
The Setup Wizard will install the HP System Management HomePage 2.1.9 on
your computer.
On the following screens, you will configure security and access parameters
for the HP System Management HomePage and related HP web-based management
tools (e.g. Insight Management Agents, Version Control Agents, Diagnostics).
HP System Management HomePage 2.1.9
Hewlett-Packard Company
www.hp.com |
Press ENTER to continue.
-------------------------------------------------------------------------------
|
Operating System Groups
Select 'Add' to add an Operating System (OS) Group Name to one of the OS
Group Lists (up to 5 entries per group) or 'Delete' to delete a name from
a list. When you have completed your additions and deletions,
select 'n' below.
Administrator Group List
---------------
***empty list***
Operator Group List
---------------
***empty list***
User Group List
---------------
***empty list***
Modify Group Lists
------------------
1 - Add Groups
2 - Delete Groups
n - next |
Please enter your selection:
-------------------------------------------------------------------------------
User Access
|
Anonymous Access: Allow Anonymous users access to unsecured pages.
Please note that this includes local users.
Local Access: Setup the System Management HomePage to automatically
configure local IP addresses as part of the selected group. This means
that any user with access to the local console will be granted full
accesss if Administrator is selected, without being challenged for a
username and password.
User Access Settings
--------------------
Anonymous Access false
Local Access false
--------------------
Set Anonymous Access:
-------------------------
1 - Anonymous Access True
2 - Anonymous Access False
Set Local Access
------------------------------
3 - Disable Local Access
4 - Local Access Anonymous - Restricted access to unsecure pages
5 - Local Access Administrator - Grant full access to secure and
unsecured pages
p - previous
n - next |
Select an optional access methods to modify the Current Settings.
-------------------------------------------------------------------------------
Trust Mode
|
Select a device trust mode below. This will determine how HTTP requests
from Insight Manager 7 or Systems Insight Manager hosts are handled.
NOTE: HP strongly recommends using Trust by Certificate.
Trust by Certificate: Setup the System Management HomePage to only accept
Secure Task Execution requests and Single Login requests that have been
signed by an Insight Manager 7 or Systems Insight Manager host with a
Trusted Certificate.
Trust by Name: Setup the System Management HomePage to accept Secure Task
Execution requests and Single Login requests from specific Insight Manager 7
or Systems Insight Manager hosts.
Trust All: Setup the System Management HomePage to accept Secure Task
Execution requests and Single Login requests from any server.
Trust Mode Settings
-------------------------
Trust Mode: Trust By Certificate
-------------------------
Trusted Certificates List
-------------------------
-------------------------
1 - Trust by Certificate
2 - Trust by Name
3 - Trust All
4 - Modify Certificate List
p - previous
n - next
|
Please enter your selection:
-------------------------------------------------------------------------------
IP Binding
|
Select IP Binding to ON if you would like to bind to IP Addresses
that match a specific Subnet and Mask.
If IP Binding is enabled and no Subnet IP Address/Netmask pairs are
configured then the System Management HomePage will only be available
on the localhost.
IP Binding: OFF
1 - ON
2 - OFF
p - previous
n - next |
Please enter your selection:
-------------------------------------------------------------------------------
IP Restricted Logins
|
The System Management HomePage can restrict login access based on the
IP address of the machine from which the login is attempted.
If an IP address is explicitly excluded, it will be excluded even if it
is also explicitly included. If there are any IP addresses in the inclusion
list, then only those IP addresses will be allowed login access. If there
are no IP addresses in the inclusion list, then login access will be allowed
to any IP addresses not in the exclusion list.
IP Restricted Logins: OFF
Please select the number below to include and/or exclude specific IP
Addresses or IP Address Ranges.
1 - IP Restricted Logins ON
2 - IP Restricted Logins OFF
p - previous
n - next |
Please enter your selection:
|
===============================================================
Thank you for choosing hp
You have successfully set up the System Management HomePage
===============================================================
You can run this script by executing: perl /usr/local/hp/hpSMHSetup.pl |
Stopping hpsmhd:
Starting hpsmhd:
...
[ OK ]
# |
|
| 提供されていません。詳細は画面上のヘルプをご覧ください。 |
|
v2.1.8-177は ProLiant Support Pack(PSP)に対応しており、v7.80に同梱されていますが、その後 v2.1.9-178がリリースされています。 |
|
(
