Installation started at Fri Aug 27 14:52:42 2004 ******************************************************************************************* This installation of the ProLiant Linux Support Paq will use the ./BP000211.xml bundle file. The ProLiant Support Pack for Red Hat Linux 7.3 v7.10 (B) installation is now in progress. ******************************************************************************************* Parsing of XML file for cpq_cciss-2.4.50-18.rh73.i686.rpm package was SUCCESSFUL. Parsing of XML file for lsi-megaide-drvr-2.26e-1.i386.rpm package was SUCCESSFUL. Installation of this RPM component is NOT REQUIRED because the hardware is not present. Installation of this component will not be attempted. Parsing of XML file for aic7xxx-6.3.2-rh73.i686.rpm package was SUCCESSFUL. However, this RPM component DOES NOT SUPPORT the currently installed errata kernel. Installation of this component will not be attempted. Parsing of XML file for e100-2.3.27b-1.src.rpm package was SUCCESSFUL. Parsing of XML file for e1000-5.2.16b-1.src.rpm package was SUCCESSFUL. Parsing of XML file for bcm5700-7.1.9e-1.src.rpm package was SUCCESSFUL. Parsing of XML file for bonding-1.0.4h-1.src.rpm package was SUCCESSFUL. Parsing of XML file for vlan-1.8.0-14.src.rpm package was SUCCESSFUL. Parsing of XML file for ucd-snmp-cmaX-4.2.5-116.rh73.i386.rpm package was SUCCESSFUL. Parsing of XML file for ucd-snmp-cmaX-devel-4.2.5-116.rh73.i386.rpm package was SUCCESSFUL. Parsing of XML file for ucd-snmp-cmaX-utils-4.2.5-116.rh73.i386.rpm package was SUCCESSFUL. Parsing of XML file for hpasm-7.1.0-145.rh73.i386.rpm package was SUCCESSFUL. Parsing of XML file for hprsm-7.1.0-155.rh73.i386.rpm package was SUCCESSFUL. Parsing of XML file for cmanic-7.1.0-5.linux.i686.rpm package was SUCCESSFUL. Parsing of XML file for cmastor-7.1.0-12.linux.i386.rpm package was SUCCESSFUL. Parsing of XML file for cpqacuxe-7.15-19.linux.i386.rpm package was SUCCESSFUL. Parsing of XML file for hpasm-jlk-7.1.0-8.linux.i386.rpm package was SUCCESSFUL. ============================================================================== The user selected to store the Configuration Parameters at /var/hp/hppldu.cfg This file may be used with the '--inputfile' option, on future installations. ============================================================================== ******************************************************************************************* Preparing to install ProLiant Linux driver for Smart Array 5x and 6x Controllers for Red Hat Linux 7.3 v2.4.50-18 This RPM is used to provide binary driver modules that have been pre-built for Linux Red Hat Linux 7.3 to enable ProLiant Smart Array 5x and 6x controllers. This RPM provides a customer friendly approach to install a pre-built binary driver. Preparing... ################################################## cpq_cciss ################################################## ./install --drivers cciss --lilo --grub --initrd --noskip --dry-run 2.4.20-28.7smp The default kernel image is same as the currently loaded kernel image mkdir -p /usr/src/COMPAQ/driver_backup mkdir -p /usr/src/COMPAQ/driver_backup//./lib/modules/2.4.18-3/kernel/drivers/block cp -p /./lib/modules/2.4.18-3/kernel/drivers/block/cciss.o /usr/src/COMPAQ/driver_backup//./lib/modules/2.4.18-3/kernel/drivers/block/cciss.o cp -p ./lib/modules/2.4.18-3/kernel/drivers/block/cciss.o /./lib/modules/2.4.18-3/kernel/drivers/block/cciss.o mkdir -p /usr/src/COMPAQ/driver_backup//./lib/modules/2.4.18-3bigmem/kernel/drivers/block cp -p /./lib/modules/2.4.18-3bigmem/kernel/drivers/block/cciss.o /usr/src/COMPAQ/driver_backup//./lib/modules/2.4.18-3bigmem/kernel/drivers/block/cciss.o cp -p ./lib/modules/2.4.18-3bigmem/kernel/drivers/block/cciss.o /./lib/modules/2.4.18-3bigmem/kernel/drivers/block/cciss.o mkdir -p /usr/src/COMPAQ/driver_backup//./lib/modules/2.4.18-3smp/kernel/drivers/block cp -p /./lib/modules/2.4.18-3smp/kernel/drivers/block/cciss.o /usr/src/COMPAQ/driver_backup//./lib/modules/2.4.18-3smp/kernel/drivers/block/cciss.o cp -p ./lib/modules/2.4.18-3smp/kernel/drivers/block/cciss.o /./lib/modules/2.4.18-3smp/kernel/drivers/block/cciss.o mkdir -p /usr/src/COMPAQ/driver_backup//./lib/modules/2.4.20-28.7smp/kernel/drivers/block cp -p /./lib/modules/2.4.20-28.7smp/kernel/drivers/block/cciss.o /usr/src/COMPAQ/driver_backup//./lib/modules/2.4.20-28.7smp/kernel/drivers/block/cciss.o cp -p ./lib/modules/2.4.20-28.7smp/kernel/drivers/block/cciss.o /./lib/modules/2.4.20-28.7smp/kernel/drivers/block/cciss.o bf is cp /boot/grub/menu.lst /boot/grub/menu.lst.bak /boot/grub/menu.lst.bak executing update_grub --- /boot/grub/menu.lst Fri Aug 27 11:50:58 2004 +++ /tmp/grub.conf.9412 Fri Aug 27 14:54:24 2004 @@ -26,3 +26,10 @@ root (hd0,9) kernel /boot/vmlinuz-2.4.18-3 ro root=/dev/cciss/c0d0p10 initrd /boot/initrd-2.4.18-3.img + +# This entry (no. 4) added by Proliant HBA install script +title HP-2.4.18-3smp + root (hd0,9) + kernel /boot/vmlinuz-2.4.18-3smp ro root=/dev/cciss/c0d0p10 + initrd /boot/HP-initinstall-initrd-2.4.18-3smp.img + bf is cp /boot/grub/menu.lst /boot/grub/menu.lst.bak /boot/grub/menu.lst.bak executing update_grub --- /boot/grub/menu.lst Fri Aug 27 11:50:58 2004 +++ /tmp/grub.conf.9412 Fri Aug 27 14:54:24 2004 @@ -26,3 +26,10 @@ root (hd0,9) kernel /boot/vmlinuz-2.4.18-3 ro root=/dev/cciss/c0d0p10 initrd /boot/initrd-2.4.18-3.img + +# This entry (no. 4) added by Proliant HBA install script +title HP-2.4.18-3bigmem + root (hd0,9) + kernel /boot/vmlinuz-2.4.18-3bigmem ro root=/dev/cciss/c0d0p10 + initrd /boot/HP-initinstall-initrd-2.4.18-3bigmem.img + bf is cp /boot/grub/menu.lst /boot/grub/menu.lst.bak /boot/grub/menu.lst.bak executing update_grub --- /boot/grub/menu.lst Fri Aug 27 11:50:58 2004 +++ /tmp/grub.conf.9412 Fri Aug 27 14:54:24 2004 @@ -26,3 +26,10 @@ root (hd0,9) kernel /boot/vmlinuz-2.4.18-3 ro root=/dev/cciss/c0d0p10 initrd /boot/initrd-2.4.18-3.img + +# This entry (no. 4) added by Proliant HBA install script +title HP-2.4.18-3 + root (hd0,9) + kernel /boot/vmlinuz-2.4.18-3 ro root=/dev/cciss/c0d0p10 + initrd /boot/HP-initinstall-initrd-2.4.18-3.img + bf is cp /boot/grub/menu.lst /boot/grub/menu.lst.bak /boot/grub/menu.lst.bak executing update_grub --- /boot/grub/menu.lst Fri Aug 27 11:50:58 2004 +++ /tmp/grub.conf.9412 Fri Aug 27 14:54:24 2004 @@ -7,7 +7,9 @@ # kernel /boot/vmlinuz-version ro root=/dev/cciss/c0d0p10 # initrd /boot/initrd-version.img #boot=/dev/cciss/c0d0p10 -default=1 +# default=1 # commented out by Proliant HBA install script +default=4 +fallback=1 timeout=10 splashimage=(hd0,9)/boot/grub/splash.xpm.gz title Red Hat Linux (2.4.20-28.7smp) @@ -26,3 +28,10 @@ root (hd0,9) kernel /boot/vmlinuz-2.4.18-3 ro root=/dev/cciss/c0d0p10 initrd /boot/initrd-2.4.18-3.img + +# This entry (no. 4) added by Proliant HBA install script +title HP-2.4.20-28.7smp + root (hd0,9) + kernel /boot/vmlinuz-2.4.20-28.7smp ro root=/dev/cciss/c0d0p10 + initrd /boot/HP-initinstall-initrd-2.4.20-28.7smp.img + ./install --drivers cciss --lilo --grub --initrd --noskip 2.4.20-28.7smp The default kernel image is same as the currently loaded kernel image bf is /boot/grub/menu.lst.bak executing update_grub Updating /boot/grub/menu.lst bf is /boot/grub/menu.lst.bak-0 executing update_grub Updating /boot/grub/menu.lst bf is /boot/grub/menu.lst.bak-1 executing update_grub Updating /boot/grub/menu.lst bf is /boot/grub/menu.lst.bak-2 executing update_grub Updating /boot/grub/menu.lst Installation of this component was SUCCESSFUL. ******************************************************************************************* Preparing to install HP ProLiant NC31xx Fast Ethernet NIC Driver for Linux v2.3.27b-1 This RPM contains the e100 driver for HP ProLiant NC31xx Fast Ethernet NICs running under Linux. Installation of this component was SUCCESSFUL. ******************************************************************************************* Preparing to install HP ProLiant NC61xx/NC71xx Gigabit Ethernet NIC Driver for Linux v5.2.16b-1 This RPM contains the e1000 driver for HP ProLiant NC61xx and NC71xx Gigabit Ethernet NICs running under Linux. Installation of this component was SUCCESSFUL. ******************************************************************************************* Preparing to install HP ProLiant NC10xx/NC67xx/NC77xx Gigabit Ethernet NIC Driver for Linux v7.1.9e-1 This RPM contains the bcm5700 driver for HP ProLiant Gigabit Ethernet NICs running under Linux. Installation of this component was SUCCESSFUL. ******************************************************************************************* Preparing to install HP Tested and Approved Linux Bonding Driver v1.0.4h-1 This package contains the bonding driver for HP ProLiant NC series NICs running under the Linux distributions listed below. The driver allows you to combine multiple HP ProLiant NIC ports to behave as one. Installation of this component was SUCCESSFUL. ******************************************************************************************* Preparing to install HP Tested and Approved Linux 802.1q VLAN Driver v1.8.0-14 This package contains the Virtual LAN (VLAN) driver for HP ProLiant NC series NICs running under the Linux distributions listed below. The driver allows you to group NICs on different physical LAN segments so they can communicate with each other as though on the same physical LAN segment. Installation of this component was SUCCESSFUL. ******************************************************************************************* Preparing to install A Collection of SNMP Protocol Tools from UC-Davis for Red Hat Linux 7.3 v4.2.5-116 SNMP (Simple Network Management Protocol) is a protocol used for network management. The UCD-SNMP project includes various SNMP tools: The ucd-snmp RPM package contains the UCD-SNMP Protocol plus the cmaX extensions.The ucd-snmp-utils package contains the tools for requesting or setting information from SNMP agents, tools for generating and handling SNMP traps, a version of the netstat command which uses SNMP, and a Tk/Perl mib browser.The ucd-snmp-devel package contains the UCD-SNMP library.The ucd-snmp SRC package includes source for the various SNMP tools: an extensible agent, an SNMP library, and tools for SNMP agents. Installation of this component was SUCCESSFUL. ******************************************************************************************* Preparing to install A Collection of SNMP Protocol Tools from UC-Davis for Red Hat Linux 7.3 v4.2.5-116 SNMP (Simple Network Management Protocol) is a protocol used for network management. The UCD-SNMP project includes various SNMP tools: The ucd-snmp RPM package contains the UCD-SNMP Protocol plus the cmaX extensions.The ucd-snmp-utils package contains the tools for requesting or setting information from SNMP agents, tools for generating and handling SNMP traps, a version of the netstat command which uses SNMP, and a Tk/Perl mib browser.The ucd-snmp-devel package contains the UCD-SNMP library.The ucd-snmp SRC package includes source for the various SNMP tools: an extensible agent, an SNMP library, and tools for SNMP agents. Installation of this component was SUCCESSFUL. ******************************************************************************************* Preparing to install A Collection of SNMP Protocol Tools from UC-Davis for Red Hat Linux 7.3 v4.2.5-116 SNMP (Simple Network Management Protocol) is a protocol used for network management. The UCD-SNMP project includes various SNMP tools: The ucd-snmp RPM package contains the UCD-SNMP Protocol plus the cmaX extensions.The ucd-snmp-utils package contains the tools for requesting or setting information from SNMP agents, tools for generating and handling SNMP traps, a version of the netstat command which uses SNMP, and a Tk/Perl mib browser.The ucd-snmp-devel package contains the UCD-SNMP library.The ucd-snmp SRC package includes source for the various SNMP tools: an extensible agent, an SNMP library, and tools for SNMP agents. Installation of this component was SUCCESSFUL. ******************************************************************************************* Preparing to install HP Server Management Drivers and Agents for Red Hat Linux 7.3 v7.1.0-145 This RPM is used to provide server management capabilities for Red Hat Linux 7.3 installed on supported server systems. Installation of this component was SUCCESSFUL. ******************************************************************************************* Preparing to install HP Lights-Out Drivers and Agents for Red Hat Linux 7.3 v7.1.0-155 This RPM is used to provide Lights-Out management capabilities for Red Hat Linux 7.3 installed on supported server systems. Installation of this component was SUCCESSFUL. ******************************************************************************************* Preparing to install NIC Agents for Servers - Linux v7.1.0-5 This SNMP agent gathers critical HP ProLiant NIC hardware and software information to help IT administrators manage and troubleshoot their systems. Installation of this component was SUCCESSFUL. ******************************************************************************************* Preparing to install HP Storage Agents for Linux v7.1.0-12 The HP Storage Agents for Linux help IT administrators rapidly respond to potential and actual system failures, increase system stability, reduce troubleshooting complexity, and minimize downtime by providing predictive fault management. Installation of this component was SUCCESSFUL. ******************************************************************************************* Preparing to install HP Array Configuration Utility for Linux v7.15-19 The HP Array Configuration Utility is the web-based disk configuration utility for HP array controllers. Installation of this component was SUCCESSFUL. ******************************************************************************************* Preparing to install Server Management Agent for Linux - Japanese Language Kit v7.1.0-8 This RPM Package Manager (RPM) package contains the Server Management Agents for Linux - JLK. Installation of this component was SUCCESSFUL. ******************************************************************************************* ProLiant Support Pack installation has completed. ******************************************************************************************* Installation terminated at Fri Aug 27 15:08:54 2004