HP Array Diagnostics Utility CLI for Linux environments Version 8.50.6.0 4/29/2010 Description ----------- The Array Diagnostics Utility CLI is a command line-based tool that gathers diagnostic information and generates a compressed zip output file for all Smart Array Controllers in the system. * All other product names mentioned herein may be trademarks of their respective companies. Support ------- Supported Operating Systems Red Hat Enterprise Linux 4 and 5 SuSE Linux Enterprise Server 10, 11 Debian Sarge 32 bit Debian Sarge 64 bit Debian Etch (i386) Debian Etch (amd64) Drivers/libraries: (available from http://www.hp.com) * All platforms need to have the following drivers upgrades: - CISS driver version 2.6.18 or later (cpq_cciss_xxxx-2.6.18.i386.rpm, xxxx stands for the Linux distribution) - For supporting MSA products connected via fibre channel HBAs produced by Emulex and QLogic and OEM'edd for HP ProLiant, the appropriate driver kit is required: - Linux Driver Kit for Emulex FC HBAs and mezzaninie HBAs (hp_lpfc) - Linux Driver Kit for Qlogic FC HBAs and mezzaninie HBAs (hp_qla2x00) Supported Controllers Smart Array products: Smart Array 5312 Controller Smart Array 5302 Controller Smart Array 5304 Controller Smart Array 532 Controller Smart Array 5i Controller Smart Array 641 Controller Smart Array 642 Controller Smart Array 6400 Controller Smart Array 6400 EM Controller Smart Array 6i Controller Smart Array P600 Controller Smart Array P400 Controller Smart Array P400i Controller Smart Array E200 Controller Smart Array E200i Controller Smart Array P800 Controller Smart Array E500 Controller Smart Array P700m Contoller Smart Array P410i Controller Smart Array P411 Controller Smart Array P212 Controller Smart Array P712m Contoller Smart Array B110i SATA RAID Smart Array P812 Controller MSA products: MSA500 Controller MSA500 G2 Controller MSA1000 Controller MSA1500 CS Controller MSA20 Controller For additional support information go to: http://www.hp.com/products1/serverconnectivity/support_matrices.html#linux Installing & Running the Array Diagnostics Utility CLI -------------------------------------------------------------- Installation: ADU CLI is distributed using Red Hat Package Manager (RPM) packages. If there is an older version of ADU CLI installed on the system, please use "rpm -e hpaducli" to remove it first. Use "rpm -i " to install the application. Please type "man rpm" for other details regarding RPM. The software resides in /opt/compaq/hpaducli and the executable name is hpaducli which is located in /usr/sbin. Running ADU CLI: Make sure that you have gone through the following checklist: . You run hpaducli as root. To start the application: If /usr/sbin is already added in your path, just type: "hpaducli -f adu-report.zip". More options can be found by "hpaducli -help". System Requirements and Dependencies ------------------------------------ HP recommends using the most updated versions of HP supported device drivers for the Smart Array controllers and fibre channel HBAs. Known Issues and Limitations ---------------------------- N/A Problems Resolved ----------------- The following issues have been resolved in this release of the HP Array Diagnostics Utility Command Line Interface. N/A Additional Notes ---------------- Feedback -------- For support for ADU CLI or Smart Array controllers, please visit the web at http://support.hp.com. For feedback or suggestions on ADU CLI, please send comments to acu@hp.com. Please note that support cannot be provided through this address.