Offline HP Array Configuration Utility Image Version 9.0-24.0 2012-02-01 Description ----------- The Offline HP Array Configuration Utility provides an ISO image that can be burned to a CD/DVD, or flashed to a USB memory key using the HP USB Key Utility for Windows (http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=US&swItem=MTX-eee9b3632ced47478f9ef85d43&mode=5) Support ------- Supported Controllers Smart Array products: Smart Array 5312 Controller Smart Array 5302 Controller Smart Array 5304 Controller Smart Array 532 Controller Smart Array 5i Controller Smart Array 641 Controller Smart Array 642 Controller Smart Array 6400 Controller Smart Array 6400 EM Controller Smart Array 6i Controller Smart Array P600 Controller Smart Array P400 Controller Smart Array P400i Controller Smart Array E200 Controller Smart Array E200i Controller Smart Array P800 Controller Smart Array E500 Controller Smart Array P700m Controller Smart Array P410i Controller Smart Array P411 Controller Smart Array P212 Controller Smart Array P712m Controller Smart Array B110i SATA RAID Smart Array P812 Controller Smart Array P220i Controller Smart Array P222 Controller Smart Array P420 Controller Smart Array P420i Controller Smart Array P421 Controller MSA products: MSA500 Controller MSA500 G2 Controller MSA1000 Controller MSA1500 CS Controller MSA20 Controller For additional support information go to: http://www.hp.com/products1/serverconnectivity/support_matrices.html#linux Installing & Running the Offline HP Array Configuration Utility -------------------------------------------------------------- Burn/write the ISO image to the desired media (CD/DVD/USB Key). Insert the media into the server and boot the server. Verify that your system can boot from the desired media. A menu with the three boot options (ACU, ACUCLI, HPACUSCRIPTING) is shown. The user can manually select which utility to start; or if no selection is made, ACU is automatically started. This image is a bootable environment that immediately starts ACU to allow configuration of storage. This ISO image can also be mounted as a CD image through ILO2. It is highly recommended that your server have the latest BIOS firmware and latest ILO2 firmware installed. This utility provides the following boot options: * The web based Array Configuration Utility (ACU) * The command line Array Configuration Utility (ACUCLI) * The command line Array Configuration Scripting Utility (HPACUSCRIPTING) Feedback -------- For support for Offline HP Array Configuration Utility or Smart Array controllers, please visit the web at http://support.hp.com. For feedback or suggestions on the Offline HP Array Configuration Utility, please send comments to acu@hp.com. Please note that support cannot be provided through this address.