FILE NAME: e100-1.5.6-1.src.rpm
TITLE:     Compaq Tested and Approved e100 Linux NIC Driver
VERSION:   1.5.6
LANGUAGE:  English

CATEGORY:  Software Solutions

DIVISIONS: Mainstream Servers

PRODUCTS AFFECTED: ProLiant ML 330
                   ProLiant ML 330e
                   ProLiant ML 350, First Generation up to 933MHz
                   ProLiant ML 350, Second Generation 1GHz and up
                   ProLiant ML 370
                   ProLiant ML 530  6/800
                   ProLiant ML 570
                   ProLiant DL 320
                   ProLiant DL 360  6/800
                   ProLiant DL 380  6/733
                   ProLiant DL 580
                   ProLiant 8000    6/550
                   ProLiant 8500    6/550

                   Compaq NC3120 10/100 TX PCI
                   Compaq NC3121 Fast Ethernet NIC
                   Compaq NC3122 Dual Port Fast Ethernet
                   Compaq NC3131 10/100 Dual Port Modular base
                   Compaq NC3132 Fast Ethernet Dual 10/100 upgrade Module
                   Compaq NC3123 Fast Ethernet NIC PCI 10/100 WOL
                   Compaq NC3134 Fast Ethernet NIC
                   Compaq NC3135 Fast Ethernet Upgrade Module
                   Compaq NC3160 Fast Ethernet Embedded NIC
                   Compaq NC3161 Fast Ethernet Embedded NIC
                   Compaq NC3162 Fast Ethernet Embedded NIC
                   Compaq NC3163 Fast Ethernet Embedded NIC

OPERATING SYSTEM:  Red Hat Linux 7.0 
                   Red Hat Linux 7.1 
                   SuSE Linux 7.0 
                   Caldera OpenLinux eServer 3.1


PREREQUISITES:  N/A

EFFECTIVE DATE:  June 1, 2001

SUPERSEDES:  sp16262.tgz

DESCRIPTION:  This Reliable Package Manager (RPM) package contains the 
              Compaq Tested and Approved e100 Linux NIC driver.

ENHANCEMENTS/FIXES:  This release has been tested and approved for the 
                     following additional operating systems:
                                Red Hat Linux 7.1 
                                SuSE Linux 7.0
                                Caldera OpenLinux eServer 3.1

HOW TO USE:

1.  Download the e100-1.5.6-1.src.rpm RPM.  

2.  Issue the following command to install the source:

	rpm -ivh e100-1.5.6-1.src.rpm

    A tar gzipped file containing the source is installed in the
    /usr/src/.../SOURCES (/usr/src/redhat/SOURCES, /usr/src/packages/SOURCES,
    etc.) directory. 

3.  Enter the SOURCES directory and issue the following command to extract
    the source:

	tar -xzf e100-1.5.6.tar.gz

    A directory named e100-1.5.6 is created, cd into the e100-1.5.6 directory
    and follow the instructions in the e100.txt file to build, load, and 
    configure the driver.

4.  You may delete the e100-1.5.6-1.src.rpm RPM file.

5.  If running SuSE Linux, follow the instructions outlined below (full 
    document at ftp://ftp.suse.com/pub/people/kgw/7.0/e100-v1.3.20/README.first)

        :
        If you want to rebuild the module for yourself, make sure that
        /usr/src/linux is a copy of (or a symbolic link to) the kernel source
        tree contained in the SuSE 7.0 package lx_suse. Furthermore, the 
        following files must correspond to your running kernel:
 
           /usr/src/linux/.config
           /usr/src/linux/include/linux/autoconf.h
           /usr/src/linux/include/linux/version.h

        Note: the SuSE pre-compiled kernel packages k_deflt and k_smp 
              contain copies of these files at the following locations:
 
           /boot/vmlinuz.config
           /boot/vmlinuz.autoconf.h
           /boot/vmlinuz.version.h

 
        After you've thus prepared the kernel sources, follow the instructions
        from the README contained in the source archive.
        :


Copyright 2000-2001, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks
of their respective companies