Promise FastTrak S150 SX4/SX4000 For RedHat Linux 9.0 
               Driver Version 1.01.30.56

1. [INTRUDUCTION]

1.1 File List

rh90.img: The floppy disk image file used to install RedHat Linux 9.0
         with FastTrak S150 SX4/SX4000 Driver, these drivers support Linux 
         kernel 2.4.20-8 UP/SMP and bigmem.
readme.txt : This file

1.2 How to make floppy

1.2.1 On DOS-based PC:
	Running "rawrite.exe" and according to prompt to extract image file
	to floppy.

1.2.2 On UNIX/LINUX-based PC:
	running command "dd if=imagefilename of=floppydevicename bs=10k" to
	copy image file to floppy.
	Note: 
	    imagefilename --- the disk image file name that you want to copy.
	    floppydevicename --- the floppy device name, on linux OS that name
	should be "/dev/fd0".


2. [How to Install]

     Firstly, Make a FastTrak S150 SX4/SX4000 Driver disk from "rh90.img" 
	 by the way as section 1.2 described, and insert it to your floppy drive, 
	 and do the following installation as section 2.1 or 2.2.

2.1. New OS Installation:

   1.) Start the Redhat Install by booting with the installation diskette
       or bootable CD ROM.
   2.) On "Welcome to Red Hat Linux" installation screen, a prompted label 
       "boot:" will appear at the bottom of the screen. type in "linux dd" 
	   (without quotation  mark) and then press enter. 
   3.) You will be asked "Do you have a driver disk?". Select "Yes".
   4.) When prompted "Insert your driver disk and press OK to continue", 
       insert the driver diskette in the floppy drive and then select "OK".
   5.) After the " Devices" dialog box appears, select "Add Device" option.
   6.) When asked "What kind of device would you like to add?", select "SCSI", 
       and then select "Ok".
   7.) Scroll down to "Promise FastTrak S150 SX4/SX4000 ATA-RAID Controller", and then 
       select "Ok".
   8.) The installation process will now display the "Promise FastTrak S150
       SX4/SX4000 ATA-RAID Controller" as been found, select "Done".   
   9.) Continue with the installation as normal. 

2.2 Install FastTrak S150 SX4/SX4000 Driver on RedHat exist OS

   Get a floppy for installing all FastTrak S150 SX4/SX4000 drivers, and insert it to 
   floppy driver, and do the following steps:
   1.) login as root
   2.) run "mount -r /dev/fd0 /mnt/floppy"
   3.) run "cd /mnt/floppy; sh ./install"
   4.) run "cd; umount /mnt/floppy"