SOFTPAQ NUMBER: N/A PART NUMBER: N/A FILE NAME: adpahci-1.20.3858.0-1.rhel3.i686.dd.gz TITLE: HP Embedded SATA RAID Controller Driver Diskette for RedHat Enterprise Linux 3 for x86 VERSION: 1.20.3858.0-1 LANGUAGE: English CATEGORY: Driver Diskettes DIVISION: N/A OPERATING SYSTEM: RedHat Enterprise Linux 3 for x86 EFFECTIVE DATE: May 8, 2006 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: N/A SUPERSEDES: N/A SUPPORT SYSTEMS/DEVICES: HP Embedded SATA RAID Controller HP ProLiant DL320 G4 HP ProLiant ML110 G3 HP ProLiant ML310 G3 DESCRIPTION: This driver diskette image provides the binary driver module pre-built for Red Hat Enterprise Linux 3.0 for x86 to enable the embedded SATA RAID Controller. Using this driver diskette at Red Hat Enterprise Linux 3.0 for x86 installation time allows the most up-to-date driver version included in the diskette to be used, rather than the default driver version contained in the Red Hat Enterprise Linux 3.0 at x86 installation CD. FIXES ENHANCEMENTS The kernels of Red Hat Enterprise Linux 3 supported by this driver diskette are: 2.4.21-20.EL - Red Hat Enterprise Linux 3.0 Update 3 (x86) 2.4.21-27.EL - Red Hat Enterprise Linux 3.0 Update 4 (x86) 2.4.21-32.EL - Red Hat Enterprise Linux 3.0 Update 5 (x86) 2.4.21-37.EL - Red Hat Enterprise Linux 3.0 Update 6 (x86) INSTALLATION To install Linux using this "ProLiant Red Hat Enterprise Linux 3.0 at x86" Driver Diskette, boot your Linux machine with your Red Hat Enterprise Linux 3.0 at x86 CD1 in your CD-ROM Drive. A menu will be displayed, prompting for your input. Type the following line of code to inform the operating system of the diskette: # linux updates dd Red Hat Enterprise Linux 3.0 at x86 will prompt for the Updates Diskette and the ProLiant Red Hat Enterprise Linux 3.0 at x86 Driver Diskette during the installation procedure. NOTES Installation CREATING A DRIVER DISKETTE There are two methods to create the Installation Diskette: MAKING A DISKETTE UNDER MS-DOS: Save the driver diskette image file into a temporary directory. Note: Please ensure that driver diskette image file is save in a DOS 8.3 name. Use the "rawrite" utility which can be obtained from the Linux OS media. Insert a floppy diskette in the diskette drive, run the rawrite utility and follow the on screen prompts. MAKING A DISKETTE UNDER A LINUX-LIKE OS: Save the driver diskette image file into a temporary directory. Note: To make a diskette under Linux (or any other Linux-like operating system), you must have permission to write to the device representing a 3.5-inch diskette drive (known as /dev/fd0 under Linux). Insert a floppy diskette in the diskette drive, but DO NOT issue the mount command: # dd if=[driver diskette image filename] of=/dev/fd0 bs=1440k Customer Service ---------------- For support, please send email to contact.hp@hp.com. Copyright 2006 Hewlett-Packard Development Company, L.P. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.