SOFTPAQ NUMBER: N/A PART NUMBER: N/A FILE NAME: cpq_cciss-2.4.46-rh7.2.dd.gz TITLE: Driver diskette image for Smart Array 640x, 64x, 5i, 53xx series controllers for Red Hat Linux 7.2 VERSION: 2.4.46 LANGUAGE: English CATEGORY: Storage Controllers DIVISION: N/A OPERATING SYSTEM: Red Hat Linux 7.2 SYSTEM CONFIGURATION: All shipping configurations PREREQUISITES: N/A EFFECTIVE DATE: Jun 23,2003 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: N/A SUPERSEDES: N/A DESCRIPTION: This driver diskette image provides the binary driver module pre-built for Red Hat Linux 7.2 to enable Proliant Smart Array 640x, 64x, 5i, 53xx series controllers. Using this driver diskette at Red Hat Linux 7.2 installation time allows the most up-to-date driver version included in the diskette to be used, rather than the default driver version contained in the Red Hat Linux 7.2 installation CD. ENHANCES/FIXES * Smart Array 6400 controller support * Smart Array 6400 EM controller support * Watchdog timer feature updated to support multipath * Applied changes requested by vmware in #ifdefs * Reintroduced CCISS_GETLUNID in cciss_ioctl.h for ABI consistencies. * Some variable types added to accommodate Alpha team requests. * Added check for buffer size before unmapping the buffer in cciss_ioctl() function. * Added a monitoring thread to fail all commands if the controller stops responding. * Updated to dynamically initialize ccissscsi structure instead of having it statically done at compile time. * Updated cciss driver now able to use more than 8 controllers in the system. * Changes made to install script, so that driver will install into latest errata kernel found on running system. * Added devfs support to cciss driver. * Changed the way the driver finds PCI config table. CREATING A DRIVER DISKETTE There are two methods to create the Installation Diskette: MAKING A DISKETTE UNDER MS-DOS: 1) Save the "cpq_cciss-2.4.46-rh7.2.dd.gz" file into a temporary directory. Use WINZIP to extract "cpq_cciss-2.4.46-rh7.2.dd" from this file into the same directory. Please ensure that "cpq_cciss-2.4.46-rh7.2.dd" is a DOS 8.3 name. 2) Use the "rawrite" utility which is included on the Red Hat Linux 7.2 CD in the "dosutil" directory. 3) Label a blank, formatted 3.5-inch diskette as "Proliant Red Hat Linux 7.2 Driver Diskette". Next, insert the diskette in the diskette drive. Then, use the following commands (assuming your Proliant Disk Image is at the location c: and your CD-ROM is drive d:) C:\> d:\dosutils\rawrite Enter disk image source file name: cpq_cciss-2.4.46-rh7.2.dd Enter target diskette drive: a: Please insert a formatted diskette into drive A: and press --ENTER-- : Enter MAKING A DISKETTE UNDER A LINUX-LIKE OS: 1) Save the "cpq_cciss-2.4.46-rh7.2.dd.gz" file into a temporary directory. Use GUNZIP to extract "cpq_cciss-2.4.46-rh7.2.dd" from this file into the same directory 2) To make a diskette under Linux (or any other Linux-like operating system), you must have permission to write to the device representing a 3.5-inch diskette drive (known as /dev/fd0 under Linux) 3) First, label a blank, formatted diskette appropriately (Proliant Red Hat Linux 7.2 Driver Diskette). Insert the diskette into the floppy drive, but DO NOT issue the mount command: # dd if=cpq_cciss-2.4.46-rh7.2.dd of=/dev/fd0 bs=1440k 4) This command creates a diskette containing the image of the input file (if=cpq_cciss-2.4.46-rh7.2.dd) to an output file (of=/dev/fd0) using the diskette size of 1440k (1.44MB). To make another diskette label that diskette, and run "dd" again, specifying the correct input file. NOTES The Red Hat bug fix advisory has released an Anaconda installer fix to address post installation failures that resulted because the updated driver in the Driver Update Diskette was not copied to the Initial RAM Disk, initrd, used for booting the server post-install. If you are using a Driver Update Diskette to update the driver for your Smart Array controller, you must use the Anaconda Update disk at this location: ftp://updates.redhat.com/7.2/en/os/images/i386/update-disk-20020117.img Feedback -------- To provide kernel/driver development feedback send email to cciss-discuss@lists.sourceforge.net Customer Service ---------------- For support for Proliant Smart Array Controllers, please send email to support@compaq.com. INSTALLATION To install Linux using this "Proliant Red Hat Linux 7.2" Driver Diskette, boot your Linux machine with your Red Hat Linux 7.2 CD1 in your CD-ROM Drive. A menu will be displayed, prompting for your input. Type the following line of code to inform the operating system of the diskette: # linux updates dd Red Hat Linux 7.2 will prompt for the Updates Diskette and the Proliant Red Hat Linux 7.2 Driver Diskette during the installation procedure. SUPPORTED DEVICES AND FEATURES Smart Array 6400 Controller Smart Array 6400 EM Controller Smart Array 641 Controller Smart Array 642 Controller Smart Array Cluster Storage Smart Array 5312 Controller Smart Array 5304 Controller Smart Array 5302 Controller Smart Array 532 Controller Smart Array 5i Plus Controller Smart Array 5i Controller SYSTEMS SUPPORTED See HP website ftp://ftp.compaq.com/pub/products/servers/proliantstorage/arraycontrollers/compatability-matrix.pdf