FILE NAME: hp-tg3sd-1.0.11-1.i586.rpm TITLE: Broadcom AHS agent daemon for HP ProLiant Gen8 Servers (32-bit) VERSION: 1.0.11 RELEASE: 1 LANGUAGE: English CATEGORY: Software Solutions DIVISIONS: Enterprise and Mainstream Servers EFFECTIVE DATE: 11/07/2012 SUPERSEDES: Initial Release Products Affected ================== HP Ethernet 1Gb 2-port 330i Adapter HP Ethernet 1Gb 2-port 332T Adapter HP Ethernet 1Gb 4-port 331FLR Adapter HP Ethernet 1Gb 4-port 331T Adapter HP Ethernet 1Gb 4-port 331i Adapter Operating Systems ================== Red Hat Enterprise Linux 6 Update 3 for x86 Red Hat Enterprise Linux 6 Update 2 for x86 Red Hat Enterprise Linux 6 Update 1 for x86 Red Hat Enterprise Linux 5 Update 8 for x86 Red Hat Enterprise Linux 5 Update 7 for x86 Red Hat Enterprise Linux 5 Update 6 for x86 SUSE LINUX Enterprise Server 11 Service Pack 2 for x86 SUSE LINUX Enterprise Server 11 Service Pack 1 for x86 SUSE LINUX Enterprise Server 10 Service Pack 4 for x86 SUSE LINUX Enterprise Server 10 Service Pack 3 for x86 Pre-requisites =============== ProLiant server supporting above operating systems 2 GB RAM minimum Latest HP System ROM NOTE: Visit the following URL and download latest System ROM http://welcome.hp.com/country/us/en/support.html Select "Download drivers and software" Description ============ This package installs a Broadcom AHS agent daemon that helps extract sensor and health data from network adapters listed above in the PRODUCTS AFFECTED section Enhancements/Fixes =================== Initial Release Table of Contents ================= Introduction Installation instructions Introduction ============ This file describes how to install and start Broadcom AHS agents daemon User guides and additional HP Network Adapter information can be found at: http://h18004.www1.hp.com/products/servers/networking/index-nic.html Installing the RPM Package ============================= 1. Install the RPM package. # rpm -ivh hp-tg3sd-..rpm This package installs init scripts which enable the agent daemon to be started automatically on boot. Reboot the server to start agent daemon automatically on boot. To start the service manually, execute: # service tg3sd start To check current status, execute: # service tg3sd status (C) Copyright 2012 Hewlett-Packard Development Company, L.P. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.