FILE NAME: mptlinux-3.02.83.20-1.sles9.i586.dd.gz TITLE: Driver diskette for HP U320 SCSI Adapter and SAS HBA with RAID (x86/AMD32) for SUSE LINUX Enterprise Server 9 (x86) VERSION: 3.02.83.20-1 LANGUAGE: English CATEGORY: Driver Diskettes DIVISION: N/A OPERATING SYSTEM: SUSE LINUX Enterprise Server 9 (x86) ELECTRONIC DISTRIBUTION ALLOWED: Yes DESCRIPTION: This driver diskette image provides the binary driver module pre-built for SUSE LINUX Enterprise Server 9 (x86) to enable the HP ProLiant 64-bit/133-MHz Dual Channel Ultra320 SCSI HBA and HP U320 64-Bit Single Channel SCSI G2 HBA, HP U320 64-Bit Single Channel SCSI HBA, HP 8 Internal Port SAS/SATA HBA with RAID and HP 4 Internal Port SAS HBA with RAID, HP SCxxXe and SCxxGe series of HBA. Using this driver diskette at SUSE LINUX Enterprise Server 9 installation time allows the most up-to-date driver version included in the diskette to be used, rather than the default driver version contained in the SUSE LINUX Enterprise Server 9 installation CD. FIXES - Fixed an issue where minimum required details are not displayed for volumes that are rebuilding or inactive. - Fixed an issue where the SAS Address of a failed drive and replaced drive were same. ENHANCEMENTS - None. The kernels of SUSE LINUX Enterprise Server 9 (x86) supported by this driver diskette are: 2.6.5-7.244 - SUSE LINUX Enterprise Server 9 SP 3 (x86) NOTES CREATING A DRIVER DISKETTE There are two methods to create the Installation Diskette: MAKING A DISKETTE UNDER MS-DOS: 1) Save the "mptlinux-3.02.83.20-1.sles9.i586.dd.gz" file into a temporary directory. Use WINZIP to extract "mptlinux-3.02.83.20-1.sles9.i586.dd" from this file into the same directory. Please ensure that "mptlinux-3.02.83.20-1.sles9.i586.dd" is a DOS 8.3 name. 2) Use the "rawrite" utility which is included on the SUSE LINUX Enterprise Server 9 CD in the "dosutil" directory. 3) Label a blank, formatted 3.5-inch diskette as "ProLiant SUSE LINUX Enterprise Server 9 Driver Diskette". Next, insert the diskette in the diskette drive. Then, use the following commands (assuming your ProLiant Disk Image is at the location c: and your CD-ROM is drive d:) C:\> d:\dosutils\rawrite Enter disk image source file name: mptlinux-3.02.83.20-1.sles9.i586.dd Enter target diskette drive: a: Please insert a formatted diskette into drive A: and press --ENTER-- : Enter MAKING A DISKETTE UNDER A LINUX-LIKE OS: 1) Save the "mptlinux-3.02.83.20-1.sles9.i586.dd.gz" file into a temporary directory. Use GUNZIP to extract "mptlinux-3.02.83.20-1.sles9.i586.dd" from this file into the same directory 2) To make a diskette under Linux (or any other Linux-like operating system), you must have permission to write to the device representing a 3.5-inch diskette drive (known as /dev/fd0 under Linux) 3) First, label a blank, formatted diskette appropriately (ProLiant SUSE LINUX Enterprise Server 9 Driver Diskette). Insert the diskette into the floppy drive, but DO NOT issue the mount command: # dd if=mptlinux-3.02.83.20-1.sles9.i586.dd of=/dev/fd0 bs=1440k 4) This command creates a diskette containing the image of the input file (if=mptlinux-3.02.83.20-1.sles9.i586.dd) to an output file (of=/dev/fd0) using the diskette size of 1440k (1.44MB). To make another diskette label that diskette, and run "dd" again, specifying the correct input file. INSTALLATION 1. Boot from the SUSE LINUX Enterprise Server 9 disc 1. A list of options will appear in a menu list for 20 seconds. You must select Installation, press F6 for Driver Update and then press Enter. 2. Insert the driver diskette when prompted. Press Enter. 3. A dialog will be presented with the message Please choose the Driver Update Medium. From the menu list, select fd0 (floppy), select the OK button and press Enter. 4. The driver diskette will be scanned and you will see the message Reading the Driver Update... and then the message Driver Update OK. Press Enter. 5. The dialog in step 4 will reappear. Select Back and press Enter. CAUTION: If ProLiant Support Pack version 7.40 or older is installed, please install mptlinux-3.02.83.20-1.sles9.i586.rpm prior to rebooting the system. Note: If HP System Insight Manager support is required, please install the mptlinux-3.02.83.20-1.sles9.i586.rpm after the OS has completed its installation process and is successfully booting. MD5SUM: fdcf381ad7022a055820a0690f872760 Customer Service ---------------- For support, please send email to contact.hp@hp.com. Copyright 2002-2007 Hewlett-Packard Development Company, L.P. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.