ProLiant Support Pack for Red Hat Enterprise Linux 5 (i686) & (x86_64) version 9.00 -------------------------------------------------------------------------------- HP ProLiant Smart Array Controller (x86/AMD32) Driver for Red Hat Enterprise Linux 5 (x86) Version: 3.6.28-17 (Recommended) Related File: cpq_cciss-3.6.28-17.rhel5.i686.rpm cpq_cciss-3.6.28-17.rhel5.x86_64.rpm Enhancement Note: Support for new Smart Array Controllers Changed to KMOD rpm packaging Each rpm supports errata kernels within that update Support tape drive detection on boot without support scripts -------------------------------------------------------------------------------- HP Smart Array B110i SATA RAID Controller Driver for Red Hat Enterprise Linux 5 (x86) Version: 1.2.6-11 (Recommended) Related File: hpahcisr-1.2.6.11.rhel5.i686.rpm hpahcisr-1.2.6-11.rhel5.x86_64.rpm Enhancement Note: Migrated to kmod rpm packaging that provides automatic kernel errata upgrade support. -------------------------------------------------------------------------------- HP SAS2308 6 GB 2x4 ports External PCIe SAS/SATA Host Bus Adapter (x86/AMD32) Driver for Red Hat Enterprise Linux 5 (x86) Version: 10.10.17.00-1 (Recommended) Related File: kmod-mpt2sas-10.10.17.00-1.rhel5u7.i686.rpm kmod-mpt2sas-10.10.17.00-1.rhel5u7.x86_64.rpm Enhancement Note: This is the initial release to support the following controllers: HP H221 Host Bus Adapter HP H220i Host Bus Adapter -------------------------------------------------------------------------------- HP NC-Series Intel e1000 Driver for Linux Version: 8.0.25-1 (Optional) Related File: hp-e1000-8.0.25-1.src.rpm Fix Note: A KMP build of this rpm no longer fails on the SLES10 vmipae kernel. -------------------------------------------------------------------------------- HP Intel e1000e Driver for Linux Version: 1.6.2-1 (Optional) Related File: hp-e1000e-1.6.2-1.src.rpm Enhancement Note: This driver now supports Red Hat Enterprise Linux 5 Update 7. This driver now supports Red Hat Enterprise Linux 6 Update 2. -------------------------------------------------------------------------------- HP Broadcom TG3 Driver for Linux Version: 3.122g-2 (Optional) Related File: hp-tg3-3.122g-2.src.rpm Enhancement Note: This driver now supports the following network adapters: HP Ethernet 1Gb 4-port 331FLR Adapter HP Ethernet 1Gb 4-port 331i Adapter HP Ethernet 1Gb 4-port 331T Adapter This driver now supports Red Hat Enterprise Linux 6 Update 2. This driver now supports Red Hat Enterprise Linux 5 Update 7. This driver now supports SUSE Linux Enterprise Server 10 SP4. -------------------------------------------------------------------------------- HP Broadcom 1/10 GbE Multifunction Drivers for Linux Version: 7.0.36-2 (Optional) Related File: hp-netxtreme2-7.0.36-2.src.rpm Enhancement Note: This rpm no longer contains the iSCSI offload driver. That driver is now available in the HP Broadcom 1/10 GbE iSCSI Offload Driver for Linux rpm package. This driver now supports Red Hat Enterprise Linux 6 Update 2. This driver now supports Red Hat Enterprise Linux 5 Update 7. This driver now supports SUSE Linux Enterprise Server 10 SP4. This software now supports the following network adapters: HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter HP Ethernet 10Gb 2-port 530FLB Adapter HP Ethernet 10Gb 2-port 530M Adapter -------------------------------------------------------------------------------- HP Broadcom 1/10 GbE iSCSI Offload Driver for Linux Version: 7.0.36-2 (Optional) Related File: hp-netxtreme2-iscsi-7.0.36-2.src.rpm Enhancement Note: Initial release. -------------------------------------------------------------------------------- HP NC-Series QLogic nx_nic Driver for Linux Version: 4.0.579-2 (Optional) Related File: hp-nx_nic-4.0.579-2.src.rpm Fix Note: This driver corrects an issue which could result in the adapter losing connectivity and writing "TX path hung. Device being reset" to the system event log. This driver no longer fails to load on SLES10 when interfaces are configured with the GPL driver. This driver addresses an issue that caused a hang on some adapters. This driver must be installed only after upgrading to firmware version 4.0.555 or later. Enhancement Note: KMP build support has been added for Red Hat Enterprise Linux 6, Update 1. KMP build support has been added for Red Hat Enterprise Linux 5, Update 7. Jumbo frame support has been added for the HP NC375T PCI Express Quad Port Gigabit Server Adapter. -------------------------------------------------------------------------------- HP Intel igb Driver for Linux Version: 3.2.10-3 (Optional) Related File: hp-igb-3.2.10-3.src.rpm Enhancement Note: This driver now supports the HP Ethernet 1Gb 2-port 361i Adapter. This driver now supports Red Hat Enterprise Linux 5 Update 7. This driver now supports Red Hat Enterprise Linux 6 Update 2. -------------------------------------------------------------------------------- HP Emulex 10GbE Driver for Linux Version: 4.0.479.0-2 (Optional) Related File: hp-be2net-4.0.479.0-2.src.rpm Enhancement Note: This driver now supports Red Hat Enterprise Linux 6 Update 2. This software now supports the following network adapters: HP Flex-10 10Gb 2-port 552M Adapter HP FlexFabric 10Gb 2-port 554FLB Adapter HP FlexFabric 10Gb 2-port 554FLR-SFP+ Adapter HP FlexFabric 10Gb 2-port 554M Adapter -------------------------------------------------------------------------------- HP Emulex 10GbE iSCSI Driver for Linux Version: 4.0.480.0-2 (Optional) Related File: hp-be2iscsi-4.0.480.0-2.src.rpm Enhancement Note: This driver now supports Red Hat Enterprise Linux 6 Update 2. This software now supports the following network adapters: HP FlexFabric 10Gb 2-port 554FLB Adapter HP FlexFabric 10Gb 2-port 554FLR-SFP+ Adapter HP FlexFabric 10Gb 2-port 554M Adapter -------------------------------------------------------------------------------- HP Mellanox 10GbE Driver for Linux Version: 1.5.5.7-14 (Optional) Related File: hp-mlnx-en-1.5.5.7-14.src.rpm Enhancement Note: This driver now supports Red Hat Enterprise Linux 5 Update 7. This driver now supports Red Hat Enterprise Linux 6 Update 2. -------------------------------------------------------------------------------- HP QLogic qlcnic Driver for Linux Version: 5.0.17.4-3 (Optional) Related File: hp-qlnic-5.0.17.4-3.src.rpm Enhancement Note: This driver now supports Red Hat Enterprise Linux 6 Update 2. -------------------------------------------------------------------------------- HP OpenIPMI Device Driver for Red Hat Enterprise Linux 5 (x86) Version: 8.5.2-*.rhel5 (Optional) Related File: hp-OpenIPMI-8.5.2-%build.version_subst%.rhel5.i386.rpm hp-OpenIPMI-8.5.2-%build.version_subst%.rhel5.x86_64.rpm Important Note: The HP OpenIPMI device driver features are now available in the Red Hat Enterprise Linux 5 Update 5 (or Later) Kernel. Therefore, you don't need to install this package. Fix Note: Suppressed logs where " channel_handler:Error Code: 0xc9" message was observed in /var/log/messages. This was expected messages as probe was done during the init. -------------------------------------------------------------------------------- HP ProLiant Channel Interface Device Driver for iLO / iLO 2 for Red Hat Enterprise Linux 5 (x86) Version: 8.5.0-*.rhel5 (Optional) Related File: hp-ilo-8.5.0-%build.version_subst%.rhel5.i386.rpm hp-ilo-8.5.0-%build.version_subst%.rhel5.x86_64.rpm Important Note: The hp-ilo features are now included in the Red Hat Enterprise Linux 5 Update 3 and later. Therefore you don't need to install hp-ilo if you are running Red Hat Enterprise Linux 5 Update 3 and later. Enhancement Note: Added support for newer distribution kernels. -------------------------------------------------------------------------------- HP System Health Application and Command Line Utilities for Red Hat Enterprise Linux 5 (x86) Version: 9.0.0 (Optional) Related File: hp-health-8.5.0-%build.version_subst%.rhel5.i386.rpm hp-health-8.5.0-%build.version_subst%.rhel5.x86_64.rpm Important Note: The HP System Health Application and Insight Management Agents (hpasm) version 8.0.0 was split into three individual rpm packages: HP System Health Application and Command Line Utilities (hp-health) version 8.1.0 HP SNMP Agents (hp-snmp-agents) version 8.1.0 HP System Management Homepage Templates (hp-smh-templates) version 8.1.0 These three packages provide equivalent functionality as hpasm v8.0.0 and allow for a more modular installation choice. Enhancement Note: Added support for: HP ProLiant Gen8 Servers. HP Integrated Lights-Out 4 (iLO 4). -------------------------------------------------------------------------------- HP SNMP Agents for Red Hat Enterprise Linux 5 (x86) Version: 9.0.0 (Optional) Related File: hp-snmp-agents-8.5.0-%build.version_subst%.rhel5.i386.rpm hp-snmp-agents-8.5.0-%build.version_subst%.rhel5.x86_64.rpm Important Note: The HP System Health Application and Insight Management Agents (hpasm) version 8.0.0 was split into three individual rpm packages: HP System Health Application and Command Line Utilities (hp-health) version 8.1.0 HP SNMP Agents (hp-snmp-agents) version 8.1.0 HP System Management Homepage Templates (hp-smh-templates) version 8.1.0 These three packages provide equivalent functionality as hpasm v8.0.0 and allow for a more modular installation choices. Fix Note: Fixed an issue where HP Insight Management Agents were not setting the Web Address URL launched by the HP Integrated Lights-Out web pages to view HP System Management Homepage of the server. Enhancement Note: Added support for: HP ProLiant Gen8 Servers. HP Integrated Lights-Out 4 (iLO 4). Matrix Identification for HP Bladesystem Matrix. System Management BIOS (SMBIOS) version 2.7.1. Smart Array Advanced Data Mirroring (ADM). Solid State physical disk Smart SSDWear Gauge for Smart Array and SAS controllers. Physical drive authentication for Smart Array and SAS controllers. Provided a provision to accommodate HP Insight Management Agents sub-systems status in an array (MIB). It can be useful to find all the sub-systems status in a single MIB value. Enhanced hpsnmpconfig tool to configure HP Insight Management Agents using command line options. Added support for the following network adapters: HP Ethernet 1Gb 4-port 331FLR Adapter. HP Ethernet 1Gb 4-port 331T Adapter. HP Ethernet 1Gb 4-port 331i Adapter. HP Ethernet 1Gb 2-port 361i Adapter. HP Flex-10 10Gb 2-port 530FLB Adapter. HP Flex-10 10Gb 2-port 530M Adapter. HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter. HP Flex-10 10Gb 2-port 552M Adapter. HP FlexFabric 10Gb 2-port 554FLB Adapter. HP FlexFabric 10Gb 2-port 554FLR-SFP+ Adapter. HP FlexFabric 10Gb 2-port 554M Adapter Added support for the following Storage Controllers: HP Smart Array P222. HP Smart Array P420. HP Smart Array P420i. HP Smart Array P220i. HP Smart Array P421. HP H220i HostBus Adapter. HP H221 HostBus Adapter. -------------------------------------------------------------------------------- HP iLO High-Performance Mouse for Linux Version: 1.2.1-* (Optional) Related File: hpmouse-1.2.0-%build.version_subst%.noarch.rpm Important Note: Fix Note: Fixed issue where the remote console mouse does not function properly on RedHat Enterprise Linux 4 Update 8 with iLO3 based servers. Previously released version (1.2.0) that claimed iLO3 support did not function as expected under RHEL4 update 8 on iLO3 based servers. -------------------------------------------------------------------------------- HP System Management Homepage for Linux (x86) Version: 7.0.0-24 (Recommended) Related File: hpsmh-7.0.0-24.i386.rpm hpsmh-7.0.0-24.x86_64.rpm Fix Note: SMH improperly displayed an invalid certificate warning when restarted, even on a fresh install. Enhancement Note: Added the following features: A command line option to modify the local and state information in the SMH PKCS (Public-Key Cryptography Standards) data Secured handling of HTTP request and response Added support for the following browsers: Firefox 6.0, 7.0 & 8.0 Internet Explorer 9.0 Clarified the log messages Improved the handling of the following components: Command Line Interface options IP fields Memory resources Revoked trusted certificate SMH configuration file and settings Improved the CLI options, for easier management of SMH configurations Updated the HTTP links Updated the following elements: Apache to version 2.2.21 Curl library to version 7.21.7 OpenSSL to version 1.0.0e PHP to version 5.3.8 -------------------------------------------------------------------------------- HP System Management Homepage Templates for Linux Version: 9.0.0 (Optional) Related File: hp-smh-templates-9.0.0-%build.noarch Important Note: The HP System Health Application and Insight Management Agents (hpasm) version 8.0.0 was split into three individual rpm packages: HP System Health Application and Command Line Utilities (hp-health) version 8.1.0 HP SNMP Agents (hp-snmp-agents) version 8.1.0 HP System Management Homepage Templates (hp-smh-templates) version 8.1.0 These three packages provide equivalent functionality as hpasm v8.0.0 and allow for a more modular installation choices. Fix Note: Enhancement Note: Added support for Red Hat Enterprise Server 6 Update 2. -------------------------------------------------------------------------------- HP ProLiant Agentless Management Service for Red Hat Enterprise Linux 5 (x86) Version: 1.0.0 (Optional) Related File: N/A Important Note: The HP Agentless Management Service (hp-ams) provides information to the HP Integrated Lights-Out 4 service providing SNMP support. Enhancement Note: Initial release. -------------------------------------------------------------------------------- HP Version Control Agent for Linux Version: 7.0.0-12 (Recommended) Related File: hpvca-7.0.0-12.linux.rpm Important Note: Enable automatic update or Perform "Update from hp.com now" in Version Control Repository Manager to obtain the latest HP Smart Update Manager (HPSUM) or manually download Linux HPSUM from http://downloads.hpe.com/pub/softlib2/software1/sc-linux/p809864560/v71069/hpsum-5.0.0.scexe and place in repository folder of Version Control Repository Manager Version 6.1 and above. HPSUM is recommended for the deployment of software and firmware that are stored in the repository. Fix Note: Updated OpenSSL to recent and stable version 1.0.0e Includes bug fixes and security fixes. Improved component filter logic to download and deploy only applicable component from Software baseline or Service Pack for ProLiant. Enhancement Note: Added the following support: HP Service Pack for ProLiant (SPP) Set as Reference Support Pack Deploy from VCA home page and through HP SIM. Authenticate VCRM using SMH trusted servers certificates. -------------------------------------------------------------------------------- HP Array Configuration Utility for Linux Version: 9.0.24.0 (Optional) Related File: cpqacuxe-%product.version%.noarch.rpm Fix Note: Enhancement Note: Added support for the following controllers: HP Smart Array P222 HP Smart Array P420 HP Smart Array P421 HP Smart Array P220i HP Smart Array P420i Added support for the following features/devices: Smart Array Advanced Pack 2.0 (SAAP 2.0) SAAP 2.0 provides full SAAP 1.0 feature functionality with the following additions: RAID 1/10 Advanced Data Mirroring (ADM) Moving and Deleting of Individual Logical Volumes Move operation now supports SATA to SAS, SAS to SATA Predictive Spare Activation > 128 physical drives SmartSSD Wear Gauge Updated Cache Ratio settings Additional Strip Sizes - 512, 1024 on supported controllers and configurations Device Temperatures - Controllers, Capacitors, Cache Modules, and Hard Drives Overall Performance improvements 3 TB physical drives -------------------------------------------------------------------------------- HP Array Configuration Utility CLI for Linux Version: 9.0.24.0 (Optional) Related File: hpacucli-%product.version%.noarch.rpm Enhancement Note: Added support for the following controllers: HP Smart Array P222 HP Smart Array P420 HP Smart Array P421 HP Smart Array P220i HP Smart Array P420i Added support for the following features/devices: Smart Array Advanced Pack 2.0 (SAAP 2.0) SAAP 2.0 provides full SAAP 1.0 feature functionality with the following additions: RAID 1/10 Advanced Data Mirroring (ADM) Moving and Deleting of Individual Logical Volumes Move operation now supports SATA to SAS, SAS to SATA Predictive Spare Activation > 128 physical drives SmartSSD Wear Gauge Updated Cache Ratio settings Additional Strip Sizes - 512, 1024 on supported controllers and configurations Device Temperatures - Controllers, Capacitors, Cache Modules, and Hard Drives Overall Performance improvements 3 TB physical drives -------------------------------------------------------------------------------- HP Fibre Channel Enablement Kit for Linux Version: 1.2-7 (Optional) Related File: hp-fc-enablement-1.2-7.noarch.rpm Enhancement Note: Added support for RHEL 6.2. -------------------------------------------------------------------------------- Fibreutils for HP Storage Fibre Channel Host Bus Adapters for Linux (x86) Version: 3.2-4 (Optional) Related File: fibreutils-3.2-4.i386.rpm fibreutils-3.2-4.x86_64.rpm Fix Note: - Fix for dependency check error seen when installing with HPSUM. -------------------------------------------------------------------------------- HP Lights-Out Online Configuration Utility for Linux Version: 4.0.0-0 (Optional) Related File: hponcfg-4.0.0-0.noarch.rpm Fix Note: Capture configuration using /a /w switches may have given a Feature Not SupportedEerror. Enhancement Note: Added support for iLO 4. -------------------------------------------------------------------------------- HP Insight Diagnostics Online Edition for Linux (x86 32-bit) Version: 9.0.0-36 (Optional) Related File: hpdiags-%product.version%.linux.i586.rpm hpdiags-%product.version%.linux.x86_64.rpm Enhancement Note: Added support for new server products. See the contents of the Release Notes tab to view the list of new hardware support added in this version. --------------------------------------------------------------------------------