ProLiant Support Pack for SUSE LINUX Enterprise Server 11 (i686) & (x86_64) Version 8.60 INSTALLER --------------------------------------------------------------------------- HP Smart Update Manager for Linux Version: 4.1.0 (Recommended) Related File: N/A Enhancement Note: This release of HP SUM includes the following new support: Updated support for Virtual Connect FW deployment for VC firmware 3.x and later New CLI and input file parameters for Virtual Connect firmware CLI - oa_username and oa_password Input file parameters - OAUID and OAPWD Added support for online deployment of HP 3 Gb SAS BL Switch Firmware Added Host Search options on the Select Installation Host(s) screen CONTENTS -------------------------------------------------------------------------------- HP ProLiant Smart Array Controller (x86/AMD32) Driver for SUSE LINUX Enterprise Server 11 (x86) Version: 4.6.26-6 (Optional) Related File: cpq_cciss-4.6.26-6.sles11.i586.rpm Related File: cpq_cciss-4.6.26-6.sles11.x86_64.rpm Fix Note: Driver configured for performant mode. Enhancement Note: Added latest Kernel errata support. -------------------------------------------------------------------------------- HP U320 SCSI Adapter, SAS HBA with RAID, SCxxXe and SCxxGe series HBA Driver (x86 and AMD32) for SUSE LINUX Enterprise Server 11 (x86) Version: 4.00.13.08-4 (Optional) Related File: mptlinux-4.00.13.08-4.sles11.i586.rpm Related File: mptlinux-4.00.13.08-4.sles11.x86_64.rpm Enhancement Note: Added latest Kernel errata support. -------------------------------------------------------------------------------- HP Smart Array B110i SATA RAID Controller Driver for SUSE LINUX Enterprise Server 11 (x86) HP Smart Array B110i SATA RAID Controller Driver for SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Version: 1.2.4-18 (Optional) Related File: hpahcisr-1.2.4-18.sles11.i586.rpm Related File: hpahcisr-1.2.4-18.sles11.x86_64.rpm Fix Note: Rpm install changes to better handled hpahcisr installation on non-RAID configured systems. Update to better support Xen command limits. Fixed a drive recovery issue if a bad block is found. Enhancement Note: Added latest errata support -------------------------------------------------------------------------------- HP NC-Series Intel e1000 Driver for Linux Version: 8.0.23-1 (Optional) Related File: hp-e1000-8.0.23-1.src.rpm Fix Note: Some errors in the installation instructions in the text file for this rpm have been corrected. Enhancement Note: This driver is the latest available driver from Intel. -------------------------------------------------------------------------------- HP NC-Series Intel e1000e Driver for Linux Version: 1.2.10-1 (Optional) Related File: hp-e1000e-1.2.10-1.src.rpm Fix Note: Some errors in the installation instructions in the text file for this rpm have been corrected. Enhancement Note: This driver is the latest available driver from Intel. -------------------------------------------------------------------------------- HP NC-Series QLogic nx_nic Driver for Linux Version: 4.0.534-2 (Optional) Related File: hp-nx_nic-4.0.534-2.src.rpm Enhancement Note: This driver is the latest available driver from QLogic. -------------------------------------------------------------------------------- HP NC-Series Broadcom TG3 Driver for Linux Version: 3.110g-2 (Optional) Related File: hp-tg3-3.110g-2.src.rpm Enhancement Note: This driver is the latest available driver from Broadcom. -------------------------------------------------------------------------------- HP NC-Series Intel igb Driver for Linux Version: 2.3.4-1 (Optional) Related File: hp-igb-2.3.4-1.src.rpm Enhancement Note: This driver is the latest available drivers from Intel. -------------------------------------------------------------------------------- HP NC-Series Emulex 10GbE Driver for Linux Version: 2.102.435.0-1 (Optional) Related File: hp-be2net-2.102.435.0-1.src.rpm Enhancement Note: This driver now supports the HP NC552m 10Gb 2-port FlexFabric Converged Network Adapter. -------------------------------------------------------------------------------- HP NC-Series Emulex 10GbE iSCSI Driver for Linux Version: 2.102.435.0-1 (Optional) Related File: hp-be2iscsi-2.102.435.0-1.src.rpm Enhancement Note: This driver now supports the HP StorageWorks CN1000E Dual Port Converged Network Adapter. -------------------------------------------------------------------------------- HP NC-Series Mellanox 10GbE Driver for Linux Version: 1.5.5-2 (Optional) Related File: hp-mlnx-en-1.5.5-2.src.rpm Enhancement Note: This driver now supports the HP NC543i 2-port 4x QDR IB/10Gb Adapter. -------------------------------------------------------------------------------- HP OpenIPMI Device Driver for SUSE LINUX Enterprise Server 11 (x86) HP OpenIPMI Device Driver for SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Version: 8.5.0-*.sles11 (Optional) Related File: hp-OpenIPMI-8.5.0-%build.version_subst%.sles11.i386.rpm Related File: hp-OpenIPMI-8.5.0-%build.version_subst%.sles11.x86_64.rpm Fix Note: Fixed rebuild compatibility with SUSE LINUX Enterprise Server Errata kernel versions. Enhancement Note: Avoid driver rebuild attempts when the distribution kernel is sufficient. -------------------------------------------------------------------------------- HP System Health Application and Command Line Utilities for SUSE LINUX Enterprise Server 11 (x86) HP System Health Application and Command Line Utilities for SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Version: 8.6.0 (Optional) Related File: hp-health-8.6.0-%build.version_subst%.sles11.i386.rpm Related File: hp-health-8.6.0-%build.version_subst%.sles11.x86_64.rpm Enhancement Note: Prevent logging of the debug messages to the console. -------------------------------------------------------------------------------- HP SNMP Agents for SUSE LINUX Enterprise Server 11 (x86) HP SNMP Agents for SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Version: 8.6.0 (Optional) Related File: hp-snmp-agents-8.6.0-%build.version_subst%.sles11.i386.rpm Related File: hp-snmp-agents-8.6.0-%build.version_subst%.sles11.x86_64.rpm Fix Note: Fixed the following issues: Addressed the tape drive not being displayed on the SMH on few configurations. Displayed the placement correctly for the failed drive after reboot. On Cmax, net-snmp displayed duplicate registration message on the syslog. Modifications are done in code to support the HP NC542m for which PCIID information is the same for both the ports. Management Processor Information may be missing from hp System Management Homepage if user rebuild hp-snmp-agents package. Enhancement Note: Added support for the MIBs in the Power Supply Table. Added support for the MIB that specifies the version of Insight Management Agents running on the system. Added support for the HP NC552m 10Gb 2-port FlexFabric Converged Network adapter. -------------------------------------------------------------------------------- HP System Management Homepage for Linux (x86) HP System Management Homepage for Linux (AMD64/EM64T) Version: 6.2.0-12 (Recommended) Related File: hpsmh-6.2.0-12.i386.rpm Related File: hpsmh-6.2.0-12.x86_64.rpm Fix Note: SMH was not displaying all the data in Home page for anonymous login. This has been fixed. Modified HTML processing. Enhancement Note: A CLI based configurable logging support in SMH log. For better auditing, user name is logged in access log for SMH login and SMH settings pages. Configuration of SSL Cipher Suite through CLI. Added logging in smhstart and Replicate Agent Settings(RAS). Added logging when SMH security settings are changed. SMH now displays remaining plug-ins even after one of the plug-ins times out. Autostart mode support. The 'System Status' and 'Overall System Summary' tabs on the SMH Home page have been changed to 'Overall System Health Status' and 'Component Status Summary' respectively. Updated the following open source components: - Apache 2.2.15 - PHP 5.2.13 - OpenSSL 0.9.8n -------------------------------------------------------------------------------- HP System Management Homepage Templates for Linux Version: 8.6.0 (Optional) Related File: hp-smh-templates-8.6.0-%build.version_subst%.noarch Important Note: The HP System Health Application and Insight Management Agents (hpasm) version 8.0.0 was split into three individual rpm packages: HP System Health Application and Command Line Utilities (hp-health) version 8.1.0 HP SNMP Agents (hp-snmp-agents) version 8.1.0 HP System Management Homepage Templates (hp-smh-templates) version 8.1.0 These three packages provide equivalent functionality as hpasm v8.0.0 and allow for a more modular installation choices. Enhancement Note: Added support for text based threshold setting on the web pages. -------------------------------------------------------------------------------- HP Array Configuration Utility for Linux Version: 8.60-7.0 (Optional) Related File: cpqacuxe-%product.version%.noarch.rpm Enhancement Note: Overall Performance improvements Wizards GUI Surface Scan Analysis enhancements Disable High Idle -------------------------------------------------------------------------------- HP Array Configuration Utility CLI for Linux Version: 8.60-8.0 (Optional) Related File: hpacucli-%product.version%.noarch.rpm Enhancement Note: Overall Performance improvements HPACUCLI as well as in HPACUSCRIPTING Surface Scan Analysis enhancements Disable High Idle -------------------------------------------------------------------------------- HP Version Control Agent for Linux Version: 6.2.0-8 (Recommended) Related File: hpvca-6.2.0-7.linux.rpm Important Note: Please manually downloand linux HPSUM from following location http://downloads.hpe.com//pub/softlib2/software1/sc-linux/p809864560/v55460/hpsum-4.0.0.scexe Copy this file to into the repository folder of Version Control Repositoy Manager version 6.1 or above Fix Note: VCA Log does not show "clear the log" button Enhancement Note: New option to set "required software" against a custom support pack. New user interface to display the missing software based on a custom support pack. Support added to contribute to the reporting feature available from VCRM -------------------------------------------------------------------------------- HP Insight Diagnostics Online Edition for Linux HP Insight Diagnostics Online Edition for Linux Version: 8.6.0-18 (Recommended) Related File: hpdiags-%product.version%.linux.i386.rpm Related File: hpdiags-%product.version%.linux.x86_64.rpm Enhancement Note: Added new hardware support. -------------------------------------------------------------------------------- HP Fibre Channel Enablement Kit for Linux Version: 1.1-17 (Optional) Related File: hp-fc-enablement-1.1-17.noarch.rpm Enhancement Note: Added support for SLES11 SP1 -------------------------------------------------------------------------------- HP Lights-Out Online Configuration Utility for Linux Version: 3.1.0-0 (Recommended) Related File: hponcfg-3.1.0-0.noarch.rpm Fix Note: Fixed an issue related to reset command for iLO3. Enhancement Note: Support for iLO3 based ProLiant G7 servers has been provided. -------------------------------------------------------------------------------- Copyright 2003-2010 Hewlett-Packard Development Company, L.P.