Release Notes for: ProLiant Support Pack for Red Hat Enterprise Linux 4 (i686), v8.30 and ProLiant Support Pack for Red Hat Enterprise Linux 4 (x86_64), v8.30 -------------------------------------------------------------------------------- Group: CONTENTS HP StorageWorks QLogic Fibre Channel Driver for 2.6.x Kernels Version: 8.02.23-1 Related File: hp_qla2x00src-%product.version%.noarch.rpm.tar.gz Enhancement Note: Syncrhonized the driver version for the stand-up and mezzanine fibre channel host bus adapters to 8.02.23 -------------------------------------------------------------------------------- HP StorageWorks QLogic Fibre Channel Driver for c-Class Blade Servers Version: 8.02.23-1 Related File: hp_qla2x00src-mezz-%product.version%.noarch.rpm.tar.gz Enhancement Note: Added 8.02.23 driver Added support for the HP QLogic 8Gb PCI Express Dual Channel Fibre Channel Mezzanine Card -------------------------------------------------------------------------------- HP Linux Driver Kit for Emulex Based Fibre Channel Host Bus Adapters for 2.6.x Kernels Version: 8.0.16.40-11B Related File: hp-lpfc-8.0.16.40-11.noarch.rpm.tar.gz Enhancement Note: Added version 2.0.30_x2 lpfcdfc module -------------------------------------------------------------------------------- HP ProLiant Smart Array Controller (x86/AMD32) Driver for Red Hat Enterprise Linux 4 (x86) HP ProLiant Smart Array Controller (AMD64/EM64T) Driver for Red Hat Enterprise Linux 4 (AMD64/EM64T) Version: 2.6.20-23B Related File: cpq_cciss-%product.version%.rhel4.i686.rpm.tar.gz cpq_cciss-%product.version%.rhel4.x86_64.rpm.tar.gz Enhancement Note: Update to support Red Hat Enterprise Linux 4 Update 8. Increased number of scsi tape commands supported. -------------------------------------------------------------------------------- HP ProLiant 64-Bit/66-Mhz Dual Channel Wide Ultra3 SCSI Controller Driver for Red Hat Enterprise Linux 4 (x86) HP ProLiant 64-Bit/66-Mhz Dual Channel Wide Ultra3 SCSI Controller Driver for Red Hat Enterprise Linux 4 (EM64T) Version: 6.3.11-11B Related File: aic7xxx-%product.version%.rhel4.i686.rpm.tar.gz aic7xxx-%product.version%.rhel4.x86_64.rpm.tar.gz Enhancement Note: Updated kernel support. -------------------------------------------------------------------------------- HP 6-Port SATA RAID Controller Driver for Red Hat Enterprise Linux 4 (AMD32/x86) HP 6-Port SATA RAID Controller Driver for Red Hat Enterprise Linux 4 (AMD64/EM64T) Version: 1.1.5.2432-8B Related File: aacraid-%product.version%.rhel4.i686.rpm.tar.gz aacraid-%product.version%.rhel4.x86_64.rpm.tar.gz Enhancement Note: Updated kernel support. -------------------------------------------------------------------------------- HP U320 SCSI Adapter, SAS HBA with RAID, SCxxXe and SCxxGe series HBA (x86 and AMD32) Driver for Red Hat Enterprise Linux 4 (x86) HP U320 SCSI Adapter, SAS HBA with RAID, SCxxXe and SCxxGe series HBA (AMD64/EM64T) Driver for Red Hat Enterprise Linux 4 (AMD64/EM64T) Version: 3.12.14.00-5B Related File: mptlinux-%product.version%.rhel4.i686.rpm.tar.gz mptlinux-%product.version%.rhel4.x86_64.rpm.tar.gz Enhancement Note: Added support for Red Hat Enterprise Linux 4 Update 8 -------------------------------------------------------------------------------- HP Embedded G6 SATA RAID Controller Driver for Red Hat Enterprise Linux 4 (x86) HP Embedded G6 SATA RAID Controller Driver for Red Hat Enterprise Linux 4 (AMD64/EM64T) Version: 1.2.1-6 Related File: hpahcisr-%product.version%.rhel4.i686.rpm.tar.gz hpahcisr-%product.version%.rhel4.x86_64.rpm.tar.gz Enhancement Note: Added drive HotPlug support. Added drive LED support. Increased supported hard drives from 4 to 6. -------------------------------------------------------------------------------- HP NC-Series Intel Driver for Linux Version: 8.0.13-2 Related File: e1000-%product.version%.src.rpm.tar.gz Enhancement Note: This software package contains the latest available driver from Intel. This software no longer supports SUSE LINUX Enterprise Server 9. -------------------------------------------------------------------------------- HP NC-Series Intel e1000e Driver for Linux Version: 1.0.2.3-1 Related File: e1000e-%product.version%.src.rpm.tar.gz Fix Note: This driver now reports the link status correctly via ethtool when the link is down on an NC364m network adapter. This driver now compiles correctly on RHEL4 U7/U8 so the user does not need to remove the xenU kernel for the compilation to succeed. Enhancement Note: This software no longer supports SUSE LINUX Enterprise Server 9. -------------------------------------------------------------------------------- HP NC-Series Broadcom 1Gb and 10GbE Multifunction Driver for Linux Version: 5.0.17-1 Related File: netxtreme2-%product.version%.src.rpm.tar.gz Enhancement Note: The bnx2x driver in this software package includes latency and throughput performance improvements over the previously released versions of the driver. This software no longer supports SUSE LINUX Enterprise Server 9. -------------------------------------------------------------------------------- HP NC-Series Broadcom TG3 Driver for Linux Version: 3.99h-1 Related File: tg3-%product.version%.src.rpm.tar.gz Enhancement Note: This software no longer supports SUSE LINUX Enterprise Server 9. This software package contains the latest available driver from Broadcom. -------------------------------------------------------------------------------- HP NC-Series NetXen Driver for Linux Version: 4.0.406-5 Related File: nx_nic-4.0.406-5.src.rpm.tar.gz Important Note: Fix Note: The release number in the source rpm spec file has been corrected so the binary rpm builds with the proper release number. -------------------------------------------------------------------------------- QLogic iSCSI Driver for Linux Version: 5.01.01.04-1B Related File: qla4xxx-%product.version%.src.rpm.tar.gz Enhancement Note: Initial release. -------------------------------------------------------------------------------- HP NC-Series Intel igb Driver for Linux Version: 1.3.23-4 Related File: igb-%product.version%.src.rpm.tar.gz Fix Note: This driver now compiles correctly on RHEL4 U7/U8 so the user does not need to remove the xenU kernel for the compilation to succeed. Enhancement Note: This software no longer supports SUSE LINUX Enterprise Server 9. -------------------------------------------------------------------------------- Init and Configuration file for Vlan Version: 1.0.1e-1L Related File: vlan_init-%product.version%.linux.rpm.tar.gz Enhancement Note: This driver now supports the NC360T and NC373T NICs. -------------------------------------------------------------------------------- HP OpenIPMI Device Driver for Red Hat Enterprise Linux 4 (x86) HP OpenIPMI Device Driver for Red Hat Enterprise Linux 4 (AMD64/EM64T) Version: 8.3.0-138.rhel4 Related File: hp-OpenIPMI-%product.version%.i386.rpm.tar.gz hp-OpenIPMI-8.3.0-138.rhel4.x86_64.rpm.tar.gz Enhancement Note: The hp-OpenIPMI rebuild script will now add the string ‘custom' to distinguish the rebuilt rpm from the original one. -------------------------------------------------------------------------------- HP ProLiant Channel Interface for Red Hat Enterprise Linux 4 (x86) HP ProLiant Channel Interface for Red Hat Enterprise Linux 4 (x86_64) Version: 8.3.0-118.rhel4 Related File: hp-ilo-8.3.0-118.rhel4.i386.rpm.tar.gz hp-ilo-8.3.0-118.rhel4.x86_64.rpm.tar.gz Enhancement Note: The hp-ilo rebuild script will now add the string ‘custom' to distinguish the rebuilt rpm from the original one. -------------------------------------------------------------------------------- HP System Health Application and Command line Utilities for Red Hat Enterprise Linux 4 (x86) HP System Health Application and Command Line Utilities for Red Hat Enterprise Linux 4 (AMD64/EM64T) Version: 8.3.0.43-29.rhel4 Related File: hp-health-8.3.0.43-29.rhel4.i386.rpm.tar.gz hp-health-8.3.0.43-30.rhel4.x86_64.rpm.tar.gz Important Note: The HP System Health Application and Insight Management Agents (hpasm) version 8.0.0 was split into three individual rpm packages: HP System Health Application and Command Line Utilities (hp-health) version 8.1.0 HP SNMP Agents (hp-snmp-agents) version 8.1.0 HP System Management Homepage Templates (hp-smh-templates) version 8.1.0 These three packages provide equivalent functionality as hpasm v8.0.0 and allow for a more modular installation choice. Fix Note: Fixed the following issues: hpasmcli -s "show server" command showed the L2 and L3 cache information incorrectly on multi processor systems. hpasmcli showed incorrect fan numbers on HP ProLiant G6 servers. hpasmxld segmentation fault when the HP Integrated Lights Out 2 (iLO 2) broadcast storm occurs. Enhancement Note: hpasmlited now supports long IML messages. Added "show powermeter" command in hpasmcli. It shows the aggregate power consumption of the server. -------------------------------------------------------------------------------- HP SNMP Agents for Red Hat Enterprise Linux 4 (x86) HP SNMP Agents for Red Hat Enterprise Linux 4 (AMD64/EM64T) Version: 8.3.0.27 Related File: hp-snmp-agents-%product.version%.i386.rpm.tar.gz hp-snmp-agents-8.3.0.27-26.rhel4.x86_64.rpm.tar.gz Important Note: The HP System Health Application and Insight Management Agents (hpasm) version 8.0.0 was split into three individual rpm packages: HP System Health Application and Command Line Utilities (hp-health) version 8.1.0 HP SNMP Agents (hp-snmp-agents) version 8.1.0 HP System Management Homepage Templates (hp-smh-templates) version 8.1.0 These three packages provide equivalent functionality as hpasm v8.0.0 and allow for a more modular installation choices. Fix Note: Fixed the following issues: The cmapeerd agent logs the error “sendto() failed” to cma.log file. The DIMM type displayed incorrectly on HP ProLiant BL460c G5. The cmahealthd agent sent the 6036 trap instead of 6035 trap upon fan failure. The port numbers displayed incorrectly for HP NC532i Dual Port 10GbE Multifunction BL-c Adapter. The Part Number displayed incorrectly. The cmanicd crashed after creation of multiple VLAN, disconnect/connect of NIC link. The System Id displayed incorrectly on the System Management Homepage (SMH). The blink drive LED feature for HP Smart Array B110i SATA RAID Controller. The embedded Broadcom SATA controller was not detected on System Management Homepage (SMH). The multipath status was displayed as "unknown" when a drive failed. The failed logical drive status displayed incorrectly during an array move, expansion or shrink. Enhancement Note: Added new 6069 trap upon AC Power loss. Also, the MIB cpqHeFltTolPowerSupplyErrorCondition will show the error information if the power supply supports error reporting. The agents now retrieve the Power supply Serial number from Type 39 SMBIOS record if it is present. The agents now display the negative temperature readings correctly if it is reported by the temperature sensors. The cmahostd agent now updates the PowerPIC firmware version information in the cpHoFwVerTable. Updated the SIM event severity to “informational” after the secure erase is completed. Added support for HP NC362i Integrated Dual Port. -------------------------------------------------------------------------------- HP iLO2 High-Performance Mouse for Linux Version: 1.1.2-33B Related File: hpmouse-1.1.2-33.noarch.rpm.tar.gz Fix Note: Fixed the issue where X would not startup when hpmouse installed on a Red Hat Enterprise Linux 5 Update 3 systems. Red Hat's SeLinux was preventing the execution of the hpmouse X driver code. The driver just needed to be rebuilt into a different format. The actual code did not change. -------------------------------------------------------------------------------- HP System Management Homepage for Linux (x86) HP System Management Homepage for Linux (AMD64/EM64T) Version: 3.0.2-77 Related File: hpsmh-%product.version%.i386.rpm.tar.gz hpsmh-%product.version%.x86_64.rpm.tar.gz Fix Note: Fixed a cross-site scripting vulnerability (XSS). Fixed an issue on search feature in SMH help Fixed an UID issue with "hpsmh" user -------------------------------------------------------------------------------- HP System Management Homepage Templates for Linux Version: 8.3.0.9-13 Related File: hp-smh-templates-%product.version%.noarch.rpm.tar.gz Important Note: The HP System Health Application and Insight Management Agents (hpasm) version 8.0.0 was split into three individual rpm packages: HP System Health Application and Command Line Utilities (hp-health) version 8.1.0 HP SNMP Agents (hp-snmp-agents) version 8.1.0 HP System Management Homepage Templates (hp-smh-templates) version 8.1.0 These three packages provide equivalent functionality as hpasm v8.0.0 and allow for a more modular installation choices. Fix Note: Fixed the following issues where the System Management Homepage (SMH) incorrectly displays: The HP Integrated Lights Out 2 (iLO 2) license information. The processor utilization information on servers with multi-core processors. The status icon for processor utilization section. The sensor information on HP ProLiant DL785 G5. Enhancement Note: The System Management Homepage (SMH) has the following updated: The server model is now displayed as ‘Product Number' The Onboard Administrator (OA) and HP Integrated Lights Out (iLO) IP Address is displayed as either IPv4 or IPv6 address. The ‘Cooling' page shows the fan information. The ‘Temperature' page shows the temperature information. -------------------------------------------------------------------------------- HP Array Configuration Utility for Linux Version: 8.30-5.0 Related File: cpqacuxe-%product.version%.noarch.rpm.tar.gz Fix Note: Enhancement Note: Changes for ACU 8.30.X.X: Enclosure View -------------------------------------------------------------------------------- HP Array Configuration Utility CLI for Linux Version: 8.30-5.0 Related File: hpacucli-%product.version%.noarch.rpm.tar.gz Enhancement Note: Changes for HPACUCLI 8.30.X.X: Enclosure View -------------------------------------------------------------------------------- HP Version Control Agent for Linux Version: 2.2.1-3 Related File: hpvca-%product.version%.linux.rpm.tar.gz Fix Note: Fixed RPM pckage consistancy errors and warnings ( rpm -V ) Enhancement Note: VCA package is now a non interactive RPM package Added command line configuration tool. -------------------------------------------------------------------------------- HP Insight Diagnostics Online Edition for Linux Version: 8.3.0-14 Related File: hpdiags-%product.version%.linux.i586.rpm.tar.gz hpdiags-%product.version%.linux.x86_64.rpm.tar.gz Enhancement Note: Added new hardware support. -------------------------------------------------------------------------------- Fibre Channel Utilities for HP StorageWorks FCA2214/FCA2214DC FC HBA for Linux (x86) Fibre Channel Utilities for HP StorageWorks FCA2214/FCA2214DC FC HBA for Linux (AMD64/EM64T) Version: 2.5-4B Related File: fibreutils-%product.version%.i386.rpm.tar.gz fibreutils-%product.version%.x86_64.rpm.tar.gz Fix Note: - Add preinstall checks so that version 2.x of fibreutils does not install on RHEL 5.3 or greater or SLES 10 SP 3 or greater - Fixed problem in lssd printing sdsd* device names - Add support for a five character device name is lssd - Changes to RPM to comply with RPM commonality spec. - Fixed grep statement that parses /sys/block for sd devices in lssd - Fixed adapter_info -L flag on SLES 9 SP 4 - Fixed printing QLogic driver version in adapter_info -------------------------------------------------------------------------------- HP Lights-Out Online Configuration Utility for Linux Version: 2.2.0-5 Related File: hponcfg-%product.version%.noarch.rpm.tar.gz Fix Note: Fixed an issue where the utlity did not work with iLO Channel Interface driver versions older that 8.20. Enhancement Note: Enables users to capture a more complete configuration of iLO/iLO2 using '-a -w' option. -------------------------------------------------------------------------------- Copyright 2003-2009 Hewlett-Packard Development Company, L.P.