Release Notes for ProLiant Support Pack for Red Hat Enterprise Linux 4 (i686), v8.26 and ProLiant Support Pack for Red Hat Enterprise Linux 4 (x86_64), v8.26 This release supports Red Hat Enterprise Linux 4 Update 8. -------------------------------------------------------------------------------- HP StorageWorks QLogic Fibre Channel Driver for 2.6.x Kernels Version: 8.02.11-6 Related File: hp_qla2x00src-8.02.11-6.noarch.rpm Fix Note: Prevent installation on updates greater than RHEL 5.2, SLES 10 SP 2 and OEL 5.2. -------------------------------------------------------------------------------- HP StorageWorks QLogic Fibre Channel Driver for c-Class Blade Servers Version: 8.01.07.25-4 Related File: hp_qla2x00src-mezz-8.01.07.25-4.noarch.rpm Fix Note: Prevent installation on updates greater than RHEL 5.2, SLES 10 SP 2 and OEL 5.2. -------------------------------------------------------------------------------- HP Linux Driver Kit for Emulex Based Fibre Channel Host Bus Adapters for 2.6.x Kernels Version: 8.0.16.40-11 Related File: hp-lpfc-8.0.16.40-11.noarch.rpm Enhancement Note: Added version 2.0.30_x2 lpfcdfc module -------------------------------------------------------------------------------- HP ProLiant Smart Array Controller (x86/AMD32) Driver for Red Hat Enterprise Linux 4 (x86) and HP ProLiant Smart Array Controller Driver for Red Hat Enterprise Linux 4 (AMD64/EM64T) Version: 2.6.20-23 Related File: cpq_cciss-2.6.20-23.rhel4.i686.rpm and cpq_cciss-2.6.20-23.rhel4.x86_64.rpm Enhancement Note: Update to support Red Hat Enterprise Linux 4 Update 8. Increased number of scsi tape commands supported. -------------------------------------------------------------------------------- HP ProLiant 64-Bit/66-Mhz Dual Channel Wide Ultra3 SCSI Controller Driver for Red Hat Enterprise Linux 4 (x86) and HP ProLiant 64-Bit/66-Mhz Dual Channel Wide Ultra3 SCSI Controller Driver for Red Hat Enterprise Linux 4 (AMD64/EM64T) Version: 6.3.11-11 Related File: aic7xxx-6.3.11-11.rhel4.i686.rpm and aic7xxx-6.3.11-11.rhel4.x86_64.rpm Enhancement Note: Updated kernel support. -------------------------------------------------------------------------------- HP 6-Port SATA RAID Controller Driver for Red Hat Enterprise Linux 4 (AMD32/x86) and HP 6-Port SATA RAID Controller Driver for Red Hat Enterprise Linux 4 (AMD64/EM64T) Version: 1.1.5.2432-8 Related File: aacraid-1.1.5.2432-8.rhel4.i686.rpm and aacraid-1.1.5.2432-8.rhel4.x86_64.rpm Enhancement Note: Updated kernel support. -------------------------------------------------------------------------------- HP U320 SCSI Adapter, SAS HBA with RAID, SCxxXe and SCxxGe series HBA (x86 and AMD32) Driver for Red Hat Enterprise Linux 4 (x86) and HP U320 SCSI Adapter, SAS HBA with RAID, SCxxXe and SCxxGe series HBA Driver for Red Hat Enterprise Linux 4 (AMD64/EM64T) Version: 3.12.14.00-5 Related File: mptlinux-3.12.14.00-5.rhel4.i686.rpm and mptlinux-3.12.14.00-5.rhel4.x86_64.rpm Enhancement Note: Added support for Red Hat Enterprise Linux 4 Update 8 -------------------------------------------------------------------------------- HP Embedded G6 SATA RAID Controller Driver for Red Hat Enterprise Linux 4 (x86) and HP Embedded G6 SATA RAID Controller Driver for Red Hat Enterprise Linux 4 (AMD64/EM64T) Version: 1.2.1-4 Related File: hpahcisr-1.2.1-4.rhel4.i686.rpm and hpahcisr-1.2.1-4.rhel4.x86_64.rpm Enhancement Note: Added drive HotPlug support. Added drive LED support. Increased supported hard drives from 4 to 6. -------------------------------------------------------------------------------- HP NC-Series Intel Driver for Linux Version: 8.0.6-3 Related File: e1000-8.0.6-3.src.rpm Fix Note: SUSE Linux Enterprise Server 11 modules now load as "supported: external." -------------------------------------------------------------------------------- HP NC-Series Intel e1000e Driver for Linux Version: 0.4.1.12-3 Related File: e1000e-0.4.1.12-3.src.rpm Fix Note: SUSE Linux Enterprise Server 11 modules now load as "supported: external." -------------------------------------------------------------------------------- HP NC-Series Broadcom 1Gb and 10GbE Multifunction Driver for Linux Version: 4.8.22-2 Related File: netxtreme2-4.8.22-2.src.rpm Fix Note: SUSE Linux Enterprise Server 11 modules now load as "supported: external." -------------------------------------------------------------------------------- HP NC-Series Broadcom TG3 Driver for Linux Version: 3.98e-3 Related File: tg3-3.98e-3.src.rpm Fix Note: This driver no longer fails to install when the /lib/modules/{KVER}/updates directory does not exist. -------------------------------------------------------------------------------- HP NC-Series NetXen Driver for Linux Version: 4.0.304-2 Related File: nx_nic-4.0.304-2.src.rpm Fix Note: SUSE Linux Enterprise Server 11 modules now load as "supported: external." -------------------------------------------------------------------------------- QLogic iSCSI Driver for Linux Version: 5.01.01.04-1 Related File: qla4xxx-5.01.01.04-1.src.rpm Enhancement Note: Initial release. -------------------------------------------------------------------------------- HP NC-Series Intel igb Driver for Linux Version: 1.3.8.6-2 Related File: igb-1.3.8.6-2.src.rpm Enhancement Note: This driver now supports SUSE LINUX Enterprise Server 11. -------------------------------------------------------------------------------- Init and Configuration file for Vlan Version: 1.0.1e-1 Related File: vlan_init-1.0.1e-1.linux.rpm Enhancement Note: This driver now supports the NC360T and NC373T NICs. -------------------------------------------------------------------------------- HP OpenIPMI Device Driver for Red Hat Enterprise Linux 4 (x86) and HP OpenIPMI Device Driver for Red Hat Enterprise Linux 4 (AMD64/EM64T) Version: 8.2.6-4.rhel4 Related File: hp-OpenIPMI-8.2.6-4.rhel4.i386.rpm and hp-OpenIPMI-8.2.6-4.rhel4.x86_64.rpm Enhancement Note: Kernel modules built for Red Hat Enterprise Linux 4 Update 8. -------------------------------------------------------------------------------- HP ProLiant Channel Interface for Red Hat Enterprise Linux 4 (x86) and HP ProLiant Channel Interface for Red Hat Enterprise Linux 4 (AMD64/EM64T) Version: 8.2.6-3.rhel4 Related File: hp-ilo-8.2.6-3.rhel4.i386.rpm and hp-ilo-8.2.6-3.rhel4.x86_64.rpm Fix Note: Fixed Red Hat Enterprise Linux 4 module rebuild logic. Enhancement Note: Kernel modules built for Red Hat Enterprise Linux 4 Update 8. -------------------------------------------------------------------------------- HP System Health Application and Command line Utilities for Red Hat Enterprise Linux 4 (x86) and HP System Health Application and Command line Utilities for Red Hat Enterprise Linux 4 (AMD64/EM64T) Version: 8.2.6-5.rhel4 Related File: hp-health-8.2.6-5.rhel4.i386.rpm and hp-health-8.2.6-5.rhel4.x86_64.rpm Important Note: The HP System Health Application and Insight Management Agents (hpasm) version 8.0.0 was split into three individual rpm packages: HP System Health Application and Command Line Utilities (hp-health) version 8.1.0 HP SNMP Agents (hp-snmp-agents) version 8.1.0 HP System Management Homepage Templates (hp-smh-templates) version 8.1.0 These three packages provide equivalent functionality as hpasm v8.0.0 and allow for a more modular installation choice. Fix Note: Fixed the hpasmcli -s “show dimm” command to prevent isolated occurrences of segmentation fault. Enhancement Note: Enhanced the hp-health init script to identify the multi-chassis ProLiant 100 series servers. -------------------------------------------------------------------------------- HP SNMP Agents for Red Hat Enterprise Linux 4 (x86) and HP SNMP Agents for Red Hat Enterprise Linux 4 (AMD64/EM64T) Version: 8.2.6-5.rhel4 Related File: hp-snmp-agents-8.2.6-5.rhel4.i386.rpm and hp-snmp-agents-8.2.6-5.rhel4.x86_64.rpm Important Note: The HP System Health Application and Insight Management Agents (hpasm) version 8.0.0 was split into three individual rpm packages: HP System Health Application and Command Line Utilities (hp-health) version 8.1.0 HP SNMP Agents (hp-snmp-agents) version 8.1.0 HP System Management Homepage Templates (hp-smh-templates) version 8.1.0 These three packages provide equivalent functionality as hpasm v8.0.0 and allow for a more modular installation choices. Fix Note: Fixed an issue where cmahealthd agent may terminate while polling memory on some. -------------------------------------------------------------------------------- HP iLO2 High-Performance Mouse for Linux Version: 1.1.2-33 Related File: hpmouse-1.1.2-33.noarch.rpm Fix Note: Fixed the issue where X would not startup when hpmouse installed on a Red Hat Enterprise Linux 5 Update 3 systems. Red Hat's SeLinux was preventing the execution of the hpmouse X driver code. The driver just needed to be rebuilt into a different format. The actual code did not change. -------------------------------------------------------------------------------- HP System Management Homepage for Linux (x86) Version: 3.0.1-73 Related File: hpsmh-3.0.1-73.i386.rpm Fix Note: Addressed the following vulnerabilities: CVE-2008-5814: Cross-site scripting (XSS) vulnerability in PHP, possibly 5.2.7 and earlier, when display_errors is enabled, allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. CVE-2008-5557: Heap-based buffer overflow in ext/mbstring/libmbfl/filters/mbfilter_htmlent.c in the mbstring extension in PHP 4.3.0 through 5.2.6 allows context-dependent attackers to execute arbitrary code via a crafted string containing an HTML entity, which is not properly handled during Unicode conversion, related to the (1) mb_convert_encoding, (2) mb_check_encoding, (3) mb_convert_variables, and (4) mb_parse_str functions. "message.php" page is vulnerable to XSS. Enhancement Note: Updated PHP and OpenSSL libraries -------------------------------------------------------------------------------- HP System Management Homepage Templates for Linux Version: 8.2.5-41 Related File: hp-smh-templates-8.2.5-41.noarch.rpm Important Note: The HP System Health Application and Insight Management Agents (hpasm) version 8.0.0 was split into three individual rpm packages: HP System Health Application and Command Line Utilities (hp-health) version 8.1.0 HP SNMP Agents (hp-snmp-agents) version 8.1.0 HP System Management Homepage Templates (hp-smh-templates) version 8.1.0 These three packages provide equivalent functionality as hpasm v8.0.0 and allow for a more modular installation choices. Fix Note: Fixed an issue where the memory subsystem was showing the correctable memory error as uncorrectable error in System Management Homepage. Fixed an issue where the logical serial number was not getting displayed correctly in System Management Homepage on blade servers. Fixed an issue where the status icon for processor utilization was not getting displayed correctly. Enhancement Note: Added support for SUSE LINUX Enterprise Server 11. -------------------------------------------------------------------------------- HP Array Configuration Utility for Linux Version: 8.28-13.0 Related File: cpqacuxe-8.28-13.0.noarch.rpm Enhancement Note: Changes for ACU 8.28.X.X: Diagnostics (ADU - Array Diagnostic Utility) is now integrated with ACU (Array Configuration Utility) GUI interface and icon updates Tabs control for major task categories...Configuration, Diagnostics, and Wizards Controller/Device Dropdown control for selecting controllers and devices System Status section displays the overall issue status count Transactions from tasks are committed to the controller as soon as the Save or Next button is clicked This behavior is new for ACU but similar to how HPACUCLI has always performed Systems and Devices Tree supports right mouse click for faster access to available tasks Systems and Devices Tree section can be extended by dragging the mouse to show more text information Available Tasks section supports a Mini-FAQ description to guide users for task selection ACU now supports context sensitive Help when in a task Supports collapsible header sections to simplify viewing of information Keyboard controls for accessibility Keyboard shortcuts for common tasks Scripting for captures and inputs is no longer supported in ACU HPACUCLI is now responsible for Scripting New SSP (Selective Storage Presentation) interface accessible from the Access Control (SSP) Tab if applicable -------------------------------------------------------------------------------- HP Array Configuration Utility CLI for Linux Version: 8.28-13.0 Related File: hpacucli-8.28-13.0.noarch.rpm Enhancement Note: Changes for HPACUCLI 8.28.X.X: Command Line Diagnostics (ADUCLI) is now integrated with HPACUCLI Scripting for captures and inputs is now intergrated with HPACUCLI This support was previously delivered with ACU The scripting command has changed from cpqacuxe to hpacuscripting -------------------------------------------------------------------------------- HP Version Control Agent for Linux Version: 2.2.1-2 Related File: hpvca-2.2.1-2.linux.rpm Fix Note: Fixed RPM pckage consistancy errors and warnings ( rpm -V ) Enhancement Note: VCA package is now a non interactive RPM package Added command line configuration tool. -------------------------------------------------------------------------------- HP Insight Diagnostics Online Edition for Linux Version: 8.2.5-7 Related File: hpdiags-8.2.5-7.linux.i586.rpm Enhancement Note: Added new hardware support. -------------------------------------------------------------------------------- Fibre Channel Utilities for HP StorageWorks FCA2214/FCA2214DC FC HBA for Linux (x86) and Fibre Channel Utilities for HP StorageWorks FCA2214/FCA2214DC FC HBA for Linux (AMD64/EM64T) Version: 2.5-4 Related File: fibreutils-2.5-4.i386.rpm and fibreutils-2.5-4.x86_64.rpm Fix Note: - Add preinstall checks so that version 2.x of fibreutils does not install on RHEL 5.3 or greater or SLES 10 SP 3 or greater - Fixed problem in lssd printing sdsd* device names - Add support for a five character device name is lssd - Changes to RPM to comply with RPM commonality spec. - Fix grep statement that parses /sys/block for sd devices in lssd - Fixed adapter_info -L flag on SLES 9 SP 4 - Fixed printing QLogic driver version in adapter_info -------------------------------------------------------------------------------- HP Lights-Out Online Configuration Utility for Linux Version: 1.9.0-3 Related File: hponcfg-1.9.0-3.noarch.rpm Fix Note: Hponcfg 1.9 is updated to work with the new driver package that is present in ProLiant Support Pack 8.20. -------------------------------------------------------------------------------- Copyright 2003-2009 Hewlett-Packard Development Company, L.P.