Release Notes for ProLiant Support Pack for Red Hat Enterprise Linux 5 (i686), v8.25 and ProLiant Support Pack for Red Hat Enterprise Linux 5 (x86_64), v8.25 -------------------------------------------------------------------------------- HP StorageWorks QLogic Fibre Channel Driver for 2.6.x Kernels Version: 8.02.11-6 Related File: hp_qla2x00src-8.02.11-6.noarch.rpm Fix Note: Prevent installation on updates greater than RHEL 5.2, SLES 10 SP 2 and OEL 5.2. -------------------------------------------------------------------------------- HP StorageWorks QLogic Fibre Channel Driver for c-Class Blade Servers Version: 8.01.07.25-4 Related File: hp_qla2x00src-mezz-8.01.07.25-4.noarch.rpm Fix Note: - Prevent installation on updates greater than RHEL 5.2, SLES 10 SP 2 and OEL 5.2. -------------------------------------------------------------------------------- HP Linux Driver Kit for Emulex Based Fibre Channel Host Bus Adapters for 2.6.x Kernels Version: 8.2.0.22-8 Related File: hp-lpfc-8.2.0.22-8.noarch.rpm Important Note: - The actual driver version in the RPM is 8.2.0.22_p1. - For SLES 10 based Linux distributions, the service pack must be SP 1 or higher. - If you are using the HBAAPI included with this RPM to get HBA data you will need to install the netlink library (libnl.so) on your system. The library uses the netlink library to communicate with the driver. Enhancement Note: Added support for the 456972-B21 8 Gb/s dual channel fibre channel mezzanine card -------------------------------------------------------------------------------- HP ProLiant Smart Array Controller (x86/AMD32) Driver for Red Hat Enterprise Linux 5 (x86) and HP ProLiant Smart Array Controller (x86/AMD32) Driver for Red Hat Enterprise Linux 5 (AMD64/EM64T) Version: 3.6.20-20 Related File: cpq_cciss-3.6.20-20.rhel5.i686.rpm and cpq_cciss-3.6.20-20.rhel5.x86_64.rpm Fix Note: Updated Rpm code to make installs on xen configuration more robust. Enhancement Note: Added Support for HP Smart Array P712m controller. -------------------------------------------------------------------------------- HP U320 SCSI Adapter, SAS HBA with RAID, SCxxXe and SCxxGe series HBA (x86 and AMD32) Driver for Red Hat Enterprise Linux 5 (x86) and HP U320 SCSI Adapter, SAS HBA with RAID, SCxxXe and SCxxGe series HBA Driver for Red Hat Enterprise Linux 5 (AMD64/EM64T) Version: 4.00.13.04-6 Related File: mptlinux-4.00.13.04-6.rhel5.i686.rpm and mptlinux-4.00.13.04-6.rhel5.x86_64.rpm Enhancement Note: Added support for Red Hat Enterprise Linux 5 Update 3 (x86) -------------------------------------------------------------------------------- HP Embedded G6 SATA RAID Controller Driver for Red Hat Enterprise Linux 5 (x86) and HP Embedded G6 SATA RAID Controller Driver for Red Hat Enterprise Linux 5 (AMD64/EM64T) Version: 1.2.1-3 Related File: hpahcisr-1.2.1-3.rhel5.i686.rpm hpahcisr-1.2.1-3.rhel5.x86_64.rpm Enhancement Note: Added drive HotPlug support. Added drive LED support. Increased supported hard drives from 4 to 6. -------------------------------------------------------------------------------- HP NC-Series Intel Driver for Linux Version: 8.0.6-3 Related File: e1000-8.0.6-3.src.rpm Fix Note: SUSE Linux Enterprise Server 11 modules now load as "supported: external." -------------------------------------------------------------------------------- HP NC-Series Broadcom TG3 Driver for Linux Version: 3.98e-3 Related File: tg3-3.98e-3.src.rpm Fix Note: This driver no longer fails to install when the /lib/modules/{KVER}/updates directory does not exist. -------------------------------------------------------------------------------- HP NC-Series Intel e1000e Driver for Linux Version: 0.4.1.12-3 Related File: e1000e-0.4.1.12-3.src.rpm Fix Note: SUSE Linux Enterprise Server 11 modules now load as "supported: external." -------------------------------------------------------------------------------- HP NC-Series Broadcom 1Gb and 10GbE Multifunction Driver for Linux Version: 4.8.22-2 Related File: netxtreme2-4.8.22-2.src.rpm Fix Note: SUSE Linux Enterprise Server 11 modules now load as "supported: external." -------------------------------------------------------------------------------- HP NC-Series NetXen Driver for Linux Version: 4.0.304-2 Related File: nx_nic-4.0.304-2.src.rpm Fix Note: SUSE Linux Enterprise Server 11 modules now load as "supported: external." -------------------------------------------------------------------------------- QLogic iSCSI Driver for Linux Version: 5.01.01.04-1 Related File: qla4xxx-5.01.01.04-1.src.rpm Enhancement Note: Initial release. -------------------------------------------------------------------------------- HP NC-Series Intel igb Driver for Linux Version: 1.3.8.6-2 Related File: igb-1.3.8.6-2.src.rpm Enhancement Note: This driver now supports SUSE LINUX Enterprise Server 11. -------------------------------------------------------------------------------- HP OpenIPMI Device Driver for Red Hat Enterprise Linux 5 (x86) and HP OpenIPMI Device Driver for Red Hat Enterprise Linux 5 (AMD64/EM64T) Version: 8.2.5-34.rhel5 Related File: hp-OpenIPMI-8.2.5-34.rhel5.i386.rpm and hp-OpenIPMI-8.2.5-34.rhel5.x86_64.rpm Enhancement Note: Allow upgrades when ipmi modules are currently in use, but detect this scenario and warn the user. -------------------------------------------------------------------------------- HP ProLiant Channel Interface for Red Hat Enterprise Linux 5 (x86) and HP ProLiant Channel Interface for Red Hat Enterprise Linux 5 (AMD64/EM64T) Version: 8.2.5-22.rhel5 Related File: hp-ilo-8.2.5-22.rhel5.i386.rpm and hp-ilo-8.2.5-22.rhel5.x86_64.rpm Fix Note: Fixed Install and start script to correctly handle Red Hat Enterprise Linux 5 rebuild process. Built with correct handle Red Hat Enterprise Linux 5 Update 3 modules. Enhancement Note: Changes from upstream kernel including new PCI ID. -------------------------------------------------------------------------------- HP System Health Application and Command Line Utilities for Red Hat Enterprise Linux 5 (x86) and HP System Health Application and Command Line Utilities for Red Hat Enterprise Linux 5 (AMD64/EM64T) Version: 8.2.5-50.rhel5 Related File: hp-health-8.2.5-50.rhel5.i386.rpm and hp-health-8.2.5-50.rhel5.x86_64.rpm Important Note: The HP System Health Application and Insight Management Agents (hpasm) version 8.0.0 was split into three individual rpm packages: HP System Health Application and Command Line Utilities (hp-health) version 8.1.0 HP SNMP Agents (hp-snmp-agents) version 8.1.0 HP System Management Homepage Templates (hp-smh-templates) version 8.1.0 These three packages provide equivalent functionality as hpasm v8.0.0 and allow for a more modular installation choice. Fix Note: Fixed an issue where running multiple instances of ‘hplog -i' may cause more than 90% CPU utilization. Fixed an issue where the servers with large amount of memory may ASR during memory initialization. Fixed an issue where the hpasmlited was not notifying the agents of memory events on HP ProLiant G6 servers. -------------------------------------------------------------------------------- HP SNMP Agents for Red Hat Enterprise Linux 5 (x86) and HP SNMP Agents for Red Hat Enterprise Linux 5 (AMD64/EM64T) Version: 8.2.5-50.rhel5 Related File: hp-snmp-agents-8.2.5-50.rhel5.i386.rpm and hp-snmp-agents-8.2.5-50.rhel5.x86_64.rpm Important Note: The HP System Health Application and Insight Management Agents (hpasm) version 8.0.0 was split into three individual rpm packages: HP System Health Application and Command Line Utilities (hp-health) version 8.1.0 HP SNMP Agents (hp-snmp-agents) version 8.1.0 HP System Management Homepage Templates (hp-smh-templates) version 8.1.0 These three packages provide equivalent functionality as hpasm v8.0.0 and allow for a more modular installation choices. Fix Note: Fixed an issue where Linux event daemon reported RAID 1 inconsistency events. Fixed an issue where cmaidad agents send bad request commands to HP P700m Smart Array controller. Fixed an issue with inconsistent data by setting Monitor and performance data buffers to zero before issuing ioctls to HP Smart Array B110i SATA raid controller. Fixed an issue where HP Smart Array B110i SATA raid controller was displayed twice as HP Smart Array B110i SATA raid controller and standard IDE controller. Fixed an issue where incorrect PCA Part number and system ID details sent in trap email. Fixed an issue where agent crashed when multiple VLANs are created and link up/down events are generated. Fixed an issue with displaying HP BL p-Class rack data in the System Management HomePage. Fixed an issue where cmahealthd sends the 6064 trap correctly when correctable memory errors are occurred. Fixed an issue where System Management Homepage correctly displays the FB DDR3 DIMM type information. Fixed an issue on HP ProLiant DL320 G6 server where the 6018 trap is not sent correctly when the temperature sensors are overheated. Fixed the customer issue to use bond IP while sending traps if bondX is chosen as param in cma.conf. Fixed problem with cmarackd startup. Enhancement Note: Added support for HP 6GB Serial Attached SCSI (SAS) hard drives. Added support for Intel ICH10 SATA IDE controller. Added support for HP NC362i Integrated Dual Port Gigabit Server Adapter. Added support for NetXen and HP NC-Series Intel e1000e Driver to send the traps. Added support for multi-board chassis product name and ID. Updated cmasm2d polling cycle to reduce system workload. Added the performance agents (cmaperfd). -------------------------------------------------------------------------------- HP iLO2 High-Performance Mouse for Linux Version: 1.1.2-33 Related File: hpmouse-1.1.2-33.noarch.rpm Fix Note: Fixed the issue where X would not startup when hpmouse installed on a Red Hat Enterprise Linux 5 Update 3 systems. Red Hat's SeLinux was preventing the execution of the hpmouse X driver code. The driver just needed to be rebuilt into a different format. The actual code did not change. -------------------------------------------------------------------------------- HP System Management Homepage for Linux (x86) and HP System Management Homepage for Linux (AMD64/EM64T) Version: 3.0.1-73 Related File: hpsmh-3.0.1-73.i386.rpm and hpsmh-3.0.1-73.x86_64.rpm Fix Note: Addressed the following vulnerabilities: CVE-2008-5814: Cross-site scripting (XSS) vulnerability in PHP, possibly 5.2.7 and earlier, when display_errors is enabled, allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. CVE-2008-5557: Heap-based buffer overflow in ext/mbstring/libmbfl/filters/mbfilter_htmlent.c in the mbstring extension in PHP 4.3.0 through 5.2.6 context-dependent attackers to execute arbitrary code via a crafted string containing an HTML entity, which is not properly handled during Unicode conversion, related to the (1) mb_convert_encoding, (2) mb_check_encoding, (3) mb_convert_variables, and (4) mb_parse_str functions. "message.php" page is vulnerable to XSS. Enhancement Note: Updated PHP and OpenSSL libraries -------------------------------------------------------------------------------- HP System Management Homepage Templates for Linux Version: 8.2.5-41 Related File: hp-smh-templates-8.2.5-41.noarch.rpm Important Note: The HP System Health Application and Insight Management Agents (hpasm) version 8.0.0 was split into three individual rpm packages: HP System Health Application and Command Line Utilities (hp-health) version 8.1.0 HP SNMP Agents (hp-snmp-agents) version 8.1.0 HP System Management Homepage Templates (hp-smh-templates) version 8.1.0 These three packages provide equivalent functionality as hpasm v8.0.0 and allow for a more modular installation choices. Fix Note: Fixed an issue where the memory subsystem was showing the correctable memory error as uncorrectable error in System Management Homepage. Fixed an issue where the logical serial number was not getting displayed correctly in System Management Homepage on blade servers. Fixed an issue where the status icon for processor utilization was not getting displayed correctly. Enhancement Note: Added support for SUSE LINUX Enterprise Server 11. -------------------------------------------------------------------------------- HP Version Control Agent for Linux Version: 2.2.1-2 Related File: hpvca-2.2.1-2.linux.rpm Fix Note: Fixed RPM pckage consistancy errors and warnings ( rpm -V ) Enhancement Note: VCA package is now a non interactive RPM package Added command line configuration tool. -------------------------------------------------------------------------------- HP Array Configuration Utility for Linux Version: 8.28-13.0 Related File: cpqacuxe-8.28-13.0.noarch.rpm Enhancement Note: Changes for ACU 8.28.X.X: Diagnostics (ADU - Array Diagnostic Utility) is now integrated with ACU (Array Configuration Utility) GUI interface and icon updates Tabs control for major task categories...Configuration, Diagnostics, and Wizards Controller/Device Dropdown control for selecting controllers and devices System Status section displays the overall issue status count Transactions from tasks are committed to the controller as soon as the Save or Next button is clicked This behavior is new for ACU but similar to how HPACUCLI has always performed Systems and Devices Tree supports right mouse click for faster access to available tasks Systems and Devices Tree section can be extended by dragging the mouse to show more text information Available Tasks section supports a Mini-FAQ description to guide users for task selection ACU now supports context sensitive Help when in a task Supports collapsible header sections to simplify viewing of information Keyboard controls for accessibility Keyboard shortcuts for common tasks Scripting for captures and inputs is no longer supported in ACU HPACUCLI is now responsible for Scripting New SSP (Selective Storage Presentation) interface accessible from the Access Control (SSP) Tab if applicable -------------------------------------------------------------------------------- HP Array Configuration Utility CLI for Linux Version: 8.28-13.0 Related File: hpacucli-8.28-13.0.noarch.rpm Enhancement Note: Changes for HPACUCLI 8.28.X.X: Command Line Diagnostics (ADUCLI) is now integrated with HPACUCLI Scripting for captures and inputs is now intergrated with HPACUCLI This support was previously delivered with ACU The scripting command has changed from cpqacuxe to hpacuscripting -------------------------------------------------------------------------------- HP Insight Diagnostics Online Edition for Linux Version: 8.2.5-7 Related File: hpdiags-8.2.5-7.linux.i586.rpm Enhancement Note: Added new hardware support. -------------------------------------------------------------------------------- HP Fibre Channel Enablement Kit for Linux Version: 1.1-4 Related File: hp-fc-enablement-1.1-4.noarch.rpm Enhancement Note: Initial version -------------------------------------------------------------------------------- Fibre Channel Utilities for HP StorageWorks FCA2214/FCA2214DC FC HBA for Linux (x86) and Fibre Channel Utilities for HP StorageWorks FCA2214/FCA2214DC FC HBA for Linux (AMD64/EM64T) Version: 2.5-4 Related File: fibreutils-2.5-4.i386.rpm and fibreutils-2.5-4.x86_64.rpm Fix Note: - Add preinstall checks so that version 2.x of fibreutils does not install on RHEL 5.3 or greater or SLES 10 SP 3 or greater - Fixed problem in lssd printing sdsd* device names - Add support for a five character device name is lssd - Changes to RPM to comply with RPM commonality spec. - Fix grep statement that parses /sys/block for sd devices in lssd - Fixed adapter_info -L flag on SLES 9 SP 4 - Fixed printing QLogic driver version in adapter_info -------------------------------------------------------------------------------- HP Lights-Out Online Configuration Utility for Linux Version: 1.9.0-3 Related File: hponcfg-1.9.0-3.noarch.rpm Fix Note: Hponcfg 1.9 is updated to work with the new driver package that is present in ProLiant Support Pack 8.20. -------------------------------------------------------------------------------- Copyright 2003-2009 Hewlett-Packard Development Company, L.P.