Installation started at Tue Jun 16 13:30:59 2009 ****************************************************************************************** This installation of the ProLiant Linux Support Pack will use the ./bp000580.xml bundle file. The ProLiant Support Pack for Red Hat Enterprise Linux 4 (i686) v8.25 installation is now in progress. ****************************************************************************************** Parsing of XML file for hp_qla2x00src-8.02.11-6.noarch.rpm component was SUCCESSFUL. Installation of this RPM component is NOT REQUIRED because the hardware is not present. Installation of this component will not be attempted. Parsing of XML file for hp_qla2x00src-mezz-8.01.07.25-4.noarch.rpm component was SUCCESSFUL. Installation of this RPM component is NOT REQUIRED because the hardware is not present. Installation of this component will not be attempted. Parsing of XML file for hp-lpfc-8.0.16.40-11.noarch.rpm component was SUCCESSFUL. Installation of this RPM component is NOT REQUIRED because the hardware is not present. Installation of this component will not be attempted. Parsing of XML file for cpq_cciss-2.6.20-20.rhel4.i686.rpm component was SUCCESSFUL. However, this RPM component DOES NOT SUPPORT the currently installed errata kernel. Installation of this component will not be attempted. Parsing of XML file for aic7xxx-6.3.11-10.rhel4.i686.rpm component was SUCCESSFUL. However, this RPM component DOES NOT SUPPORT the currently installed errata kernel. Installation of this component will not be attempted. Parsing of XML file for aacraid-1.1.5.2432-7.rhel4.i686.rpm component was SUCCESSFUL. Installation of this RPM component is NOT REQUIRED because the hardware is not present. Installation of this component will not be attempted. Parsing of XML file for mptlinux-3.12.14.00-4.rhel4.i686.rpm component was SUCCESSFUL. Installation of this RPM component is NOT REQUIRED because the hardware is not present. Installation of this component will not be attempted. Parsing of XML file for hpahcisr-1.2.1-3.rhel4.i686.rpm component was SUCCESSFUL. Installation of this RPM component is NOT REQUIRED because the hardware is not present. Installation of this component will not be attempted. Parsing of XML file for e1000-8.0.6-3.src.rpm component was SUCCESSFUL. Installation of this RPM component is NOT REQUIRED because the hardware is not present. Installation of this component will not be attempted. Parsing of XML file for e1000e-0.4.1.12-3.src.rpm component was SUCCESSFUL. Installation of this RPM component is NOT REQUIRED because the hardware is not present. Installation of this component will not be attempted. Parsing of XML file for netxtreme2-4.8.22-2.src.rpm component was SUCCESSFUL. Installation of this RPM component is NOT REQUIRED because the hardware is not present. Installation of this component will not be attempted. Parsing of XML file for tg3-3.98e-3.src.rpm component was SUCCESSFUL. Parsing of XML file for nx_nic-4.0.304-2.src.rpm component was SUCCESSFUL. Installation of this RPM component is NOT REQUIRED because the hardware is not present. Installation of this component will not be attempted. Parsing of XML file for qla4xxx-5.01.01.04-1.src.rpm component was SUCCESSFUL. Installation of this RPM component is NOT REQUIRED because the hardware is not present. Installation of this component will not be attempted. Parsing of XML file for igb-1.3.8.6-2.src.rpm component was SUCCESSFUL. Installation of this RPM component is NOT REQUIRED because the hardware is not present. Installation of this component will not be attempted. Parsing of XML file for vlan_init-1.0.1e-1.linux.rpm component was SUCCESSFUL. Parsing of XML file for hp-OpenIPMI-8.2.5-34.rhel4.i386.rpm component was SUCCESSFUL. Installation of this RPM component is NOT REQUIRED because the hardware is not present. Installation of this component will not be attempted. Parsing of XML file for hp-ilo-8.2.5-22.rhel4.i386.rpm component was SUCCESSFUL. Parsing of XML file for hp-health-8.2.5-50.rhel4.i386.rpm component was SUCCESSFUL. Parsing of XML file for hp-snmp-agents-8.2.5-50.rhel4.i386.rpm component was SUCCESSFUL. Parsing of XML file for hpmouse-1.1.2-33.noarch.rpm component was SUCCESSFUL. Installation of this RPM component is NOT REQUIRED because the hardware is not present. Installation of this component will not be attempted. Parsing of XML file for hpsmh-3.0.1-73.i386.rpm component was SUCCESSFUL. Parsing of XML file for hp-smh-templates-8.2.5-41.noarch.rpm component was SUCCESSFUL. Parsing of XML file for cpqacuxe-8.28-13.0.noarch.rpm component was SUCCESSFUL. Parsing of XML file for hpacucli-8.28-13.0.noarch.rpm component was SUCCESSFUL. Parsing of XML file for hpvca-2.2.1-2.linux.rpm component was SUCCESSFUL. Parsing of XML file for hpdiags-8.2.5-7.linux.i586.rpm component was SUCCESSFUL. Parsing of XML file for fibreutils-2.5-4.i386.rpm component was SUCCESSFUL. Installation of this RPM component is NOT REQUIRED because the hardware is not present. Installation of this component will not be attempted. Parsing of XML file for hponcfg-1.9.0-3.noarch.rpm component was SUCCESSFUL. ****************************************************************************************** Preparing to install HP NC-Series Broadcom TG3 Driver for Linux v3.98e-3 This RPM contains the tg3 driver for HP NC-Series Broadcom Gigabit Ethernet NICs running under Linux. + umask 022 + cd /usr/src/redhat/BUILD + LANG=C + export LANG + unset DISPLAY + cd /usr/src/redhat/BUILD + rm -rf tg3-3.98e + /usr/bin/bzip2 -dc /usr/src/redhat/SOURCES/tg3-3.98e.tar.bz2 + tar -xvvf - + STATUS=0 + '[' 0 -ne 0 ']' + cd tg3-3.98e ++ /usr/bin/id -u + '[' 0 = 0 ']' + /bin/chown -Rhf root . ++ /usr/bin/id -u + '[' 0 = 0 ']' + /bin/chgrp -Rhf root . + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + exit 0 + umask 022 + cd /usr/src/redhat/BUILD + cd tg3-3.98e + LANG=C + export LANG + unset DISPLAY + value= + '[' -z '' ']' ++ uname -r + KVER=2.6.9-89.ELsmp + make KVER=2.6.9-89.ELsmp + exit 0 + umask 022 + cd /usr/src/redhat/BUILD + cd tg3-3.98e + LANG=C + export LANG + unset DISPLAY + value= + '[' -z '' ']' ++ uname -r + KVER=2.6.9-89.ELsmp ++ echo 2.6.9-89.ELsmp ++ cut -c1-3 ++ sed 's/2\.[56]/2\.6/' + BCM_KVER=2.6 + '[' 2.6 = 2.6 ']' + BCM_DRV=tg3.ko + BCMDSTDIR=updates/drivers/net + echo '%defattr(-,root,root)' + echo /lib/modules/2.6.9-89.ELsmp/updates/drivers/net/tg3.ko + mkdir -p /var/tmp/tg3-3.98e-3-buildroot/lib/modules/2.6.9-89.ELsmp/updates/drivers/net + echo '/usr/share/man/man4/tg3.4.*' + mkdir -p /var/tmp/tg3-3.98e-3-buildroot/usr/share/man/man4 + make install PREFIX=/var/tmp/tg3-3.98e-3-buildroot KVER=2.6.9-89.ELsmp + /usr/lib/rpm/redhat/brp-compress + /usr/lib/rpm/redhat/brp-strip /usr/bin/strip + /usr/lib/rpm/redhat/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/redhat/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + umask 022 + cd /usr/src/redhat/BUILD + cd tg3-3.98e + DOCDIR=/var/tmp/tg3-3.98e-3-buildroot/usr/share/doc/tg3-3.98e + export DOCDIR + rm -rf /var/tmp/tg3-3.98e-3-buildroot/usr/share/doc/tg3-3.98e + /bin/mkdir -p /var/tmp/tg3-3.98e-3-buildroot/usr/share/doc/tg3-3.98e + cp -pr LICENSE README.TXT ChangeLog /var/tmp/tg3-3.98e-3-buildroot/usr/share/doc/tg3-3.98e + exit 0 + umask 022 + cd /usr/src/redhat/BUILD + cd tg3-3.98e + rm -rf /var/tmp/tg3-3.98e-3-buildroot + exit 0 + umask 022 + cd /usr/src/redhat/BUILD + rm -rf tg3-3.98e + exit 0 Installation of this component was SUCCESSFUL. ****************************************************************************************** Preparing to install Init and Configuration file for Vlan v1.0.1e-1 This RPM contains the init and configuration files for the vlan driver, which allows you to configure virtual LANs with ProLiant NICs running under Red Hat Enterprise Linux 4. Installation of this component was SUCCESSFUL. ****************************************************************************************** Preparing to install HP ProLiant Channel Interface for Red Hat Enterprise Linux 4 (x86) v8.2.5-22.rhel4 HP ProLiant Channel Interface Device Driver for iLO / iLO 2 (hp-ilo) is designed to manage agent and tool application access to the HP Integrated Lights-out (iLO) Series controllers. The hp-ilo device driver replaces the cpqci driver in the previously shipped HP Remote system Management (hprsm) package. The hp-ilo device driver is typically started by the hpasm package which now contains the HP Remote Management Agents (hprsm) previously packaged. Other tools and utilities that previously used the cpqci device driver may need to be modified to make sure the hp-ilo device driver has been inserted into the Linux kernel. This release of the hp-ilo driver has been released under a GPL 2 License. Hewlett-Packard is working with our partners and the Open Source community to integrate the hp-ilo device driver functionality into the main Linux kernel development projects. Installation of this component was SUCCESSFUL. ****************************************************************************************** Preparing to install HP System Health Application and Command line Utilities for Red Hat Enterprise Linux 4 (x86) v8.2.5-50.rhel4 The HP System Health Application and Command Line Utilities (hp-health) is collection of applications and tools which enables monitoring of fans, power supplies, temperature sensors, and other management events. It also provides collection of command-line utilities: the ProLiant boot configuration utility (hpbootcfg), the ProLiant Management Command Line Interface Utility (hpasmcli), the ProLiant Integrated Management Log (IML) Utility (hplog), and the UID (blue) Light Utility (hpuid). Installation of this component was SUCCESSFUL. ****************************************************************************************** Preparing to install HP SNMP Agents for Red Hat Enterprise Linux 4 (x86) v8.2.5-50.rhel4 The HP SNMP Agents (hp-snmp-agents) is a collection of SNMP protocol based agents and tools which enables monitoring of fans, power supplies, temperature sensors and other management events via SNMP. It also provides the following: Foundation and Server agents, Storage Subsystem agents, Network Subsystem agents, the SNMP Dynamically Loaded Module, and the web support applications. Installation of this component was SUCCESSFUL. ****************************************************************************************** Preparing to install HP System Management Homepage for Linux (x86) v3.0.1-73 The System Management Homepage provides a consolidated view for single server management highlighting tightly integrated management functionalities including performance, fault, security, diagnostic, configuration, and software change management. Installation of this component was SUCCESSFUL. ****************************************************************************************** Preparing to install HP System Management Homepage Templates for Linux v8.2.5-41 This HP System Management Homepage Templates for Linux (hp-smh-templates) contains the System Management Homepage Templates for Server, Management processor, NIC and Storage subsystems. The templates are a collection of html, javascript and php files that act as a GUI to display much of the SNMP data provided by each subsystems agent(s). As such this package is dependant on the hp-snmp-agents package. This package is also dependant on the hpsmh package to serve the pages to the browser. Installation of this component was SUCCESSFUL. ****************************************************************************************** Preparing to install HP Array Configuration Utility for Linux v8.28-13.0 The HP Array Configuration Utility is the web-based disk configuration utility for HP array controllers. Installation of this component was SUCCESSFUL. ****************************************************************************************** Preparing to install HP Array Configuration Utility CLI for Linux v8.28-13.0 The Array Configuration Utility CLI is a commandline-based disk configuration program for Smart Array Controllers and RAID Array Controllers. Installation of this component was SUCCESSFUL. ****************************************************************************************** Preparing to install HP Version Control Agent for Linux v2.2.1-2 Version Control Agent enables management of the HP ProLiant software and firmware on the system, in conjunction with the HP ProLiant Version Control Repository Manager. Installation of this component was SUCCESSFUL. ****************************************************************************************** Preparing to install HP Insight Diagnostics Online Edition for Linux v8.2.5-7 Deployed from the ProLiant Support Pack, the HP Insight Diagnostics Online Edition maintenance utility displays information about your server's hardware configuration. The online version of HP Insight Diagnostics provides the same functionality as the Survey Utility for Windows and Linux and does not perform any hardware tests on the system. Although not required, it is recommended that you uninstall the current Survey Utility for Windows or Linux before beginning the installation of HP Insight Diagnostics Online Edition. Insight Diagnostics includes a Web browser interface in addition to the command-line interface in an online mode. This enables remote control of the utility and facilitates easy transfer of configuration information from remote machines to a service provider. It can be updated from VCRM and VCA and with SIM, offers pro-active notification when an updated version is available. You can use Insight Diagnostics Online Edition to: View the hardware configuration of the machine, view the server Integrated Management Log, view the software configuration of the machine, compare historical configurations of the machine, and capture a new configuration sample. Installation of this component was SUCCESSFUL. ****************************************************************************************** Preparing to install HP Lights-Out Online Configuration Utility for Linux v1.9.0-3 HP Lights-Out Online Configuration utility is a command line utility used to configure iLO and RILOE II from within the Linux operating system without requiring a reboot of the server. Installation of this component was SUCCESSFUL. ****************************************************************************************** ProLiant Support Pack installation has completed. ****************************************************************************************** Installation completed at Tue Jun 16 13:36:37 2009