Release Notes for PSP v8.25 on CentOS (5) -------------------------------------------------------------------------------- This is an upgraded version of the OpenIPMI device driver that is shipped as part of the standard Linux kernel. This release is for Linux 2.6.18+ kernels. It provides support for PCI Based Base Management Controllers that are truly interrupt driven. This package will NOT activate on its own. The drivers for this release are placed in /opt/hp/hp-OpenIPMI/bin with a script that can be used to launch the IPMI drivers. The changes made to the IPMI drivers are expected to be included in future Linux kernels. The hp-OpenIPMI driver can be built for any kernel like any other GPL Open Source application. You need to install the appropriate kernel-devel package to make use of this. Version: 8.2.5 Related File: hp-OpenIPMI-8.2.5-34.rhel5.i386.rpm Note(s): - 8.2.0 release (Severity: Medium) -------------------------------------------------------------------------------- This is the Hewlett-Packard integrated Lights-Out (iLO) system management controller channel interface device driver. This driver establishes a channel from the iLO 2 controller to an application such that the application can communicate directly to the iLO 2 controller. Version: 8.2.5 Related File: hp-ilo-8.2.5-22.rhel5.i386.rpm Note(s): - 8.2.0 release (Severity: Medium) -------------------------------------------------------------------------------- This package contains the System Health Monitor for all hp Proliant systems with ASM, ILO, & ILO2 embedded management asics. Also contained are the command line utilities. Version: 8.2.5 Related File: hp-health-8.2.5-50.rhel5.i386.rpm Note(s): - 8.2.0 release (Severity: Medium) -------------------------------------------------------------------------------- This package contains the SNMP server, storage, and nic agents for all hp Proliant systems with ASM, ILO, & ILO2 embedded management asics. Version: 8.2.5 Related File: hp-snmp-agents-8.2.5-50.rhel5.i386.rpm Note(s): - 8.2.0 release (Severity: Medium) -------------------------------------------------------------------------------- This package provides Linux/Xwindows support for the High Performance Remote Console mouse for HP Proliant system with the ILO2 management processor. This package is derived from the generic event device input driver for Xfree86/Xorg. Version: 1.1.2 Related File: hpmouse-1.1.2-33.noarch.rpm Note(s): (none) This package provides Linux/Xwindows support for the High Performance Remote Console mouse for HP Proliant system with the ILO2 management processor. This package is derived from the generic event device input driver for Xfree86/Xorg. Version: 1.1.2 Related File: hpmouse-1.1.2-33.noarch.rpm Note(s): (none) -------------------------------------------------------------------------------- The HP System Management Homepage v3.0.1.73 Version: 3.0.1 Related File: hpsmh-3.0.1-73.i386.rpm Note(s): - Kerberos authentication support - IPv6 support - New interface and icons - Command line interface for SMH configuration - XEN server support - VMware 3.5 support - Log localization - Apache 2.2 - OpenSSL 0.9.8h - PHP 5.2.9 - LibXML2 2.7.2 -------------------------------------------------------------------------------- This package contains the System Management Homepage Templates for all hp Proliant systems with ASM, ILO, & ILO2 embedded management asics. Version: 8.2.5 Related File: hp-smh-templates-8.2.5-41.noarch.rpm Note(s): - 8.2.0 release (Severity: Medium) This package contains the System Management Homepage Templates for all hp Proliant systems with ASM, ILO, & ILO2 embedded management asics. Version: 8.2.5 Related File: hp-smh-templates-8.2.5-41.noarch.rpm Note(s): - 8.2.0 release (Severity: Medium) -------------------------------------------------------------------------------- The HP Array Configuration Utility is the web-based disk array configuration program for Array Controllers. Version: 8.28 Related File: cpqacuxe-8.28-13.0.noarch.rpm Note(s): (none) The HP Array Configuration Utility is the web-based disk array configuration program for Array Controllers. Version: 8.28 Related File: cpqacuxe-8.28-13.0.noarch.rpm Note(s): (none) -------------------------------------------------------------------------------- The HP Command Line Array Configuration Utility is the disk array configuration program for Array Controllers. Version: 8.28 Related File: hpacucli-8.28-13.0.noarch.rpm Note(s): (none) The HP Command Line Array Configuration Utility is the disk array configuration program for Array Controllers. Version: 8.28 Related File: hpacucli-8.28-13.0.noarch.rpm Note(s): (none) -------------------------------------------------------------------------------- Identifies and exercises system components. Version: 8.2.5 Related File: hpdiags-8.2.5-7.linux.i586.rpm Note(s): - Added support for ProLiant BL685c G6, ProLiant ML 310 G5p Identifies and exercises system components. Version: 8.2.5 Related File: hpdiags-8.2.5-7.linux.i586.rpm Note(s): - Added support for ProLiant BL685c G6, ProLiant ML 310 G5p -------------------------------------------------------------------------------- Hponcfg is a command line utility that can be used to configure iLO/RILOE II from with in the operating system without requiring a reboot of the server. Version: 1.9.0 Related File: hponcfg-1.9.0-3.noarch.rpm Note(s): - Made some changes in the hponcfg.spec to support the PSP8.2(Severity: Minor) - Made some changes to provide appropriate error messages when it encounters older drivers (Severity: Minor) - Modified Change log to adhere to specification; introduced version number (Severity: Minor) - Made some modifications in the changelog section to adhere to updated RPM commonality specification. Added the Severity information. (Severity: Minor) - Made some changes in the rpm specification file which would ensure the binary is placed only in /sbin folder (Severity: Minor) - Modified Change log to adhere to specification; introduced version number. (Severity: Minor) - Support for Standard Streams in Hponcfg (Severity: Major) - Inclusion of iLO reset notification (Severity: Major) - Included the Packager and URL sections to adhere to the rpm commonality specifications. (Severity: Minor) - Changed "hpasm" to "hp-snmp-agents" in the requires section. (Severity: Critical) - Change all "hpqci" to "hp-ilo" as the driver package name was changed. (Severity: Critical) - Introduced this changelog (Severity: Minor) - Introduced License field with value "Proprietary" (Severity: Minor) - Updated build architecture to "noarch" to indicate support for all versions of Linux, both IA32 and x86-64 (Severity: Major) Hponcfg is a command line utility that can be used to configure iLO/RILOE II from with in the operating system without requiring a reboot of the server. Version: 1.9.0 Related File: hponcfg-1.9.0-3.noarch.rpm Note(s): - Made some changes in the hponcfg.spec to support the PSP8.2(Severity: Minor) - Made some changes to provide appropriate error messages when it encounters older drivers (Severity: Minor) - Modified Change log to adhere to specification; introduced version number (Severity: Minor) - Made some modifications in the changelog section to adhere to updated RPM commonality specification. Added the Severity information. (Severity: Minor) - Made some changes in the rpm specification file which would ensure the binary is placed only in /sbin folder (Severity: Minor) - Modified Change log to adhere to specification; introduced version number. (Severity: Minor) - Support for Standard Streams in Hponcfg (Severity: Major) - Inclusion of iLO reset notification (Severity: Major) - Included the Packager and URL sections to adhere to the rpm commonality specifications. (Severity: Minor) - Changed "hpasm" to "hp-snmp-agents" in the requires section. (Severity: Critical) - Change all "hpqci" to "hp-ilo" as the driver package name was changed. (Severity: Critical) - Introduced this changelog (Severity: Minor) - Introduced License field with value "Proprietary" (Severity: Minor) - Updated build architecture to "noarch" to indicate support for all versions of Linux, both IA32 and x86-64 (Severity: Major) -------------------------------------------------------------------------------- This is an upgraded version of the OpenIPMI device driver that is shipped as part of the standard Linux kernel. This release is for Linux 2.6.18+ kernels. It provides support for PCI Based Base Management Controllers that are truly interrupt driven. This package will NOT activate on its own. The drivers for this release are placed in /opt/hp/hp-OpenIPMI/bin with a script that can be used to launch the IPMI drivers. The changes made to the IPMI drivers are expected to be included in future Linux kernels. The hp-OpenIPMI driver can be built for any kernel like any other GPL Open Source application. You need to install the appropriate kernel-devel package to make use of this. Version: 8.2.5 Related File: hp-OpenIPMI-8.2.5-34.rhel5.x86_64.rpm Note(s): - 8.2.0 release (Severity: Medium) -------------------------------------------------------------------------------- This is the Hewlett-Packard integrated Lights-Out (iLO) system management controller channel interface device driver. This driver establishes a channel from the iLO 2 controller to an application such that the application can communicate directly to the iLO 2 controller. Version: 8.2.5 Related File: hp-ilo-8.2.5-22.rhel5.x86_64.rpm Note(s): - 8.2.0 release (Severity: Medium) -------------------------------------------------------------------------------- This package contains the System Health Monitor for all hp Proliant systems with ASM, ILO, & ILO2 embedded management asics. Also contained are the command line utilities. Version: 8.2.5 Related File: hp-health-8.2.5-50.rhel5.x86_64.rpm Note(s): - 8.2.0 release (Severity: Medium) -------------------------------------------------------------------------------- This package contains the SNMP server, storage, and nic agents for all hp Proliant systems with ASM, ILO, & ILO2 embedded management asics. Version: 8.2.5 Related File: hp-snmp-agents-8.2.5-50.rhel5.x86_64.rpm Note(s): - 8.2.0 release (Severity: Medium) -------------------------------------------------------------------------------- The HP System Management Homepage v3.0.1.73 Version: 3.0.1 Related File: hpsmh-3.0.1-73.x86_64.rpm Note(s): - Kerberos authentication support - IPv6 support - New interface and icons - Command line interface for SMH configuration - XEN server support - VMware 3.5 support - Log localization - Apache 2.2 - OpenSSL 0.9.8h - PHP 5.2.9 - LibXML2 2.7.2 -------------------------------------------------------------------------------- Copyright 2009 Hewlett-Packard Development Company, L.P.