Compaq Computer Corporation cpqrid-1.0.0-7.i386.rpm: -Provides the Compaq Remote Insight Driver which enables the routing of SNMP traffic out of Compaq Management Cards (RIB or RILOE) and exposes the Integrated Management Log of the system. Date Originated: December 14, 2000 Product(s) Affected: ProLiant 8000 ProLiant 8500 ProLiant DL320 ProLiant DL360 ProLiant DL380 ProLiant DL580 ProLiant ML330 ProLiant ML350 ProLiant ML350 1 GHz ProLiant ML370 ProLiant ML530 ProLiant ML570 Operating System(s) Red Hat Linux 6.2, 7.0 How to apply this upgrade: 1) Login as the system administrator and place the RPM file in your current working directory. 2) Type rpm -ivh cpqrid-1.0.0-7.i386.rpm to install the driver and the IML Viewer application. The driver will be inserted immediately. 3) To check whether the driver is loaded properly, type lsmod You should see an entry indicating that driver "cpqrid" was inserted. 4) If you attempt to install the RPM on an unsupported system, you will get an error message when you attempt to install the package. The driver will not be operational and it is advisable to uninstall the driver at your earliest convenience. Running the driver: 1) Once installed, the driver will be automatically loaded every time the server boots. 2) Additional information and help is available by typing man cpqrid Uninstalling the driver: 1) Uninstall using RPM by typing rpm -e cpqrid If the driver is running, it will be shut down. Should you reboot the system, the driver will NOT be loaded at boot time. 2) If you ever wish to unload the driver, simply type rmmod cpqrid The running driver will be removed from memory. Additional information may be found at http://www.compaq.com/products/servers/linux/. Copyright 2000, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies