Oct 31 13:35:01 lccmay8 syslogd 1.4.1: restart.
Oct 31 13:35:01 lccmay8 syslog: syslogd 起動 succeeded
Oct 31 13:35:01 lccmay8 kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct 31 13:35:01 lccmay8 kernel: Bootdata ok (command line is ro root=/dev/VolGroup00/LogVol00 rhgb quiet)
Oct 31 13:35:01 lccmay8 kernel: Linux version 2.6.9-78.EL (mockbuild@builder10.centos.org) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-10)) #1 Thu Jul 24 23:45:16 EDT 2008
Oct 31 13:35:01 lccmay8 kernel: BIOS-provided physical RAM map:
Oct 31 13:35:01 lccmay8 kernel:  BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
Oct 31 13:35:01 lccmay8 kernel:  BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
Oct 31 13:35:01 lccmay8 kernel:  BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
Oct 31 13:35:01 lccmay8 kernel:  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Oct 31 13:35:01 lccmay8 kernel:  BIOS-e820: 0000000000100000 - 000000007fea0000 (usable)
Oct 31 13:35:01 lccmay8 kernel:  BIOS-e820: 000000007fea0000 - 000000007feac000 (ACPI data)
Oct 31 13:35:01 lccmay8 kernel:  BIOS-e820: 000000007feac000 - 000000007fead000 (ACPI NVS)
Oct 31 13:35:01 lccmay8 kernel:  BIOS-e820: 000000007fead000 - 0000000080000000 (reserved)
Oct 31 13:35:01 lccmay8 syslog: klogd 起動 succeeded
Oct 31 13:35:01 lccmay8 kernel:  BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
Oct 31 13:35:01 lccmay8 kernel:  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Oct 31 13:35:01 lccmay8 irqbalance: Can't balance irqs on a uniprocessor system:  failed
Oct 31 13:35:01 lccmay8 kernel:  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Oct 31 13:35:02 lccmay8 kernel:  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Oct 31 13:35:02 lccmay8 portmap: portmap 起動 succeeded
Oct 31 13:35:02 lccmay8 kernel: DMI present.
Oct 31 13:35:02 lccmay8 kernel: ACPI: PM-Timer IO Port: 0x1008
Oct 31 13:35:02 lccmay8 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Oct 31 13:35:02 lccmay8 kernel: Processor #0 6:6 APIC version 16
Oct 31 13:35:02 lccmay8 kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Oct 31 13:35:02 lccmay8 kernel: Setting APIC routing to flat
Oct 31 13:35:02 lccmay8 kernel: ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Oct 31 13:35:02 lccmay8 kernel: IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Oct 31 13:35:02 lccmay8 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
Oct 31 13:35:02 lccmay8 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Oct 31 13:35:02 lccmay8 kernel: Using ACPI (MADT) for SMP configuration information
Oct 31 13:35:02 lccmay8 kernel: Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
Oct 31 13:35:02 lccmay8 kernel: Checking aperture...
Oct 31 13:35:02 lccmay8 kernel: Built 1 zonelists
Oct 31 13:35:02 lccmay8 rpc.statd[23757]: Version 1.0.6 Starting
Oct 31 13:35:02 lccmay8 kernel: Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet console=tty0
Oct 31 13:35:02 lccmay8 kernel: Initializing CPU#0
Oct 31 13:35:02 lccmay8 kernel: PID hash table entries: 4096 (order: 12, 131072 bytes)
Oct 31 13:35:02 lccmay8 kernel: time.c: Using 3.579545 MHz PM timer.
Oct 31 13:35:02 lccmay8 nfslock: rpc.statd 起動 succeeded
Oct 31 13:35:02 lccmay8 kernel: time.c: Detected 1600.047 MHz processor.
Oct 31 13:35:02 lccmay8 kernel: time.c: Using PIT/TSC based timekeeping.
Oct 31 13:35:02 lccmay8 kernel: Console: colour VGA+ 80x25
Oct 31 13:35:02 lccmay8 kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Oct 31 13:35:02 lccmay8 kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Oct 31 13:35:02 lccmay8 kernel: Memory: 2056508k/2095744k available (2495k kernel code, 38500k reserved, 1380k data, 180k init)
Oct 31 13:35:02 lccmay8 kernel: Calibrating delay using timer specific routine.. 3203.88 BogoMIPS (lpj=1601943)
Oct 31 13:35:02 lccmay8 kernel: Security Scaffold v1.0.0 initialized
Oct 31 13:35:02 lccmay8 kernel: SELinux:  Initializing.
Oct 31 13:35:02 lccmay8 kernel: selinux_register_security:  Registering secondary module capability
Oct 31 13:35:02 lccmay8 kernel: Capability LSM initialized as secondary
Oct 31 13:35:02 lccmay8 kernel: Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
Oct 31 13:35:02 lccmay8 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Oct 31 13:35:02 lccmay8 kernel: CPU: L2 cache: 512K
Oct 31 13:35:02 lccmay8 kernel: using mwait in idle threads.
Oct 31 13:35:02 lccmay8 kernel: CPU: Intel(R) Celeron(R) CPU          420  @ 1.60GHz stepping 01
Oct 31 13:35:02 lccmay8 kernel: ACPI: System reset via FADT Reset Register is supported
Oct 31 13:35:02 lccmay8 kernel: activating NMI Watchdog ... done.
Oct 31 13:35:02 lccmay8 kernel: testing NMI watchdog ... OK.
Oct 31 13:35:02 lccmay8 kernel: Using local APIC timer interrupts.
Oct 31 13:35:02 lccmay8 kernel: Detected 12.500 MHz APIC timer.
Oct 31 13:35:02 lccmay8 kernel: checking if image is initramfs... it is
Oct 31 13:35:02 lccmay8 kernel: NET: Registered protocol family 16
Oct 31 13:35:02 lccmay8 kernel: PCI: Using configuration type 1
Oct 31 13:35:02 lccmay8 kernel: PCI: Using MMCONFIG at f0000000
Oct 31 13:35:02 lccmay8 kernel: mtrr: v2.0 (20020519)
Oct 31 13:35:02 lccmay8 kernel: ACPI: Subsystem revision 20040816
Oct 31 13:35:02 lccmay8 kernel: ACPI: Interpreter enabled
Oct 31 13:35:02 lccmay8 kernel: ACPI: Using IOAPIC for interrupt routing
Oct 31 13:35:02 lccmay8 kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Oct 31 13:35:02 lccmay8 kernel: PCI: Probing PCI hardware (bus 00)
Oct 31 13:35:02 lccmay8 kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
Oct 31 13:35:02 lccmay8 kernel: PCI: Transparent bridge - 0000:00:1e.0
Oct 31 13:35:02 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Oct 31 13:35:02 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Oct 31 13:35:02 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
Oct 31 13:35:02 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Oct 31 13:35:02 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Oct 31 13:35:03 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Oct 31 13:35:03 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Oct 31 13:35:03 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Oct 31 13:35:03 lccmay8 kernel: xen_mem: Initialising balloon driver.
Oct 31 13:35:03 lccmay8 kernel: usbcore: registered new driver usbfs
Oct 31 13:35:03 lccmay8 kernel: usbcore: registered new driver hub
Oct 31 13:35:03 lccmay8 kernel: PCI: Using ACPI for IRQ routing
Oct 31 13:35:03 lccmay8 kernel: GSI 16 sharing vector 0xA9 and IRQ 16
Oct 31 13:35:03 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
Oct 31 13:35:03 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 169
Oct 31 13:35:03 lccmay8 kernel: GSI 17 sharing vector 0xB1 and IRQ 17
Oct 31 13:35:03 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 177
Oct 31 13:35:03 lccmay8 kernel: GSI 18 sharing vector 0xB9 and IRQ 18
Oct 31 13:35:03 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 185
Oct 31 13:35:03 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 185
Oct 31 13:35:03 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
Oct 31 13:35:03 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169
Oct 31 13:35:03 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 177
Oct 31 13:35:03 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
Oct 31 13:35:03 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 177
Oct 31 13:35:03 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
Oct 31 13:35:03 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 169
Oct 31 13:35:03 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 177
Oct 31 13:35:03 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 177
Oct 31 13:35:03 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 18 (level, low) -> IRQ 185
Oct 31 13:35:03 lccmay8 kernel: ACPI: PCI Interrupt 0000:0d:00.0[A] -> GSI 16 (level, low) -> IRQ 169
Oct 31 13:35:03 lccmay8 kernel: ACPI: PCI Interrupt 0000:0e:00.0[A] -> GSI 17 (level, low) -> IRQ 177
Oct 31 13:35:03 lccmay8 kernel: PCI-DMA: Disabling IOMMU.
Oct 31 13:35:03 lccmay8 kernel: Simple Boot Flag at 0x44 set to 0x80
Oct 31 13:35:03 lccmay8 kernel: IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Oct 31 13:35:03 lccmay8 kernel: audit: initializing netlink socket (disabled)
Oct 31 13:35:03 lccmay8 kernel: audit(1225460012.423:1): initialized
Oct 31 13:35:03 lccmay8 kernel: Total HugeTLB memory allocated, 0
Oct 31 13:35:03 lccmay8 kernel: VFS: Disk quotas dquot_6.5.1
Oct 31 13:35:03 lccmay8 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Oct 31 13:35:03 lccmay8 kernel: Initializing Cryptographic API
Oct 31 13:35:04 lccmay8 kernel: ksign: Installing public key data
Oct 31 13:35:04 lccmay8 rpcidmapd: rpc.idmapd 起動 succeeded
Oct 31 13:35:04 lccmay8 kernel: Loading keyring
Oct 31 22:33:41 lccmay8 rc.sysinit: -e 
Oct 31 13:35:04 lccmay8 kernel: - Added public key 3539EB86374B5B75
Oct 31 13:33:43 lccmay8 date: 2008年 10月 31日 金曜日 13:33:43 JST 
Oct 31 13:35:04 lccmay8 kernel: - User ID: CentOS (Kernel Module GPG key)
Oct 31 13:33:43 lccmay8 rc.sysinit: Setting clock  (localtime): 2008年 10月 31日 金曜日 13:33:43 JST succeeded 
Oct 31 13:35:04 lccmay8 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 31 13:33:43 lccmay8 udevsend[1206]: starting udevd daemon 
Oct 31 13:35:04 lccmay8 kernel: ACPI: Processor [CPU0] (supports C1)
Oct 31 13:33:43 lccmay8 scsi.agent[1218]: cdrom at /devices/pci0000:00/0000:00:1f.5/host1/target1:0:0/1:0:0:0 
Oct 31 13:35:04 lccmay8 kernel: Real Time Clock Driver v1.12
Oct 31 13:33:44 lccmay8 udevsend[1232]: starting udevd daemon 
Oct 31 13:35:04 lccmay8 netfs: 他のファイルシステムをマウント中:  succeeded
Oct 31 13:35:04 lccmay8 kernel: Linux agpgart interface v0.100 (c) Dave Jones
Oct 31 13:33:47 lccmay8 start_udev: Starting udev:  succeeded 
Oct 31 13:35:04 lccmay8 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 31 13:33:57 lccmay8 rc.sysinit: -e 
Oct 31 13:35:04 lccmay8 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 31 13:35:04 lccmay8 rc: lm_sensors を起動中:  succeeded
Oct 31 13:34:27 lccmay8 sysctl: net.ipv4.ip_forward = 0 
Oct 31 13:35:04 lccmay8 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled
Oct 31 13:34:27 lccmay8 sysctl: net.ipv4.conf.default.rp_filter = 1 
Oct 31 13:35:04 lccmay8 kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 31 13:34:27 lccmay8 sysctl: net.ipv4.conf.default.accept_source_route = 0 
Oct 31 13:35:04 lccmay8 kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Oct 31 13:34:27 lccmay8 sysctl: kernel.sysrq = 0 
Oct 31 13:34:27 lccmay8 sysctl: kernel.core_uses_pid = 1 
Oct 31 13:35:04 lccmay8 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Oct 31 13:34:27 lccmay8 rc.sysinit: Configuring kernel parameters:  succeeded 
Oct 31 13:35:04 lccmay8 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct 31 13:34:27 lccmay8 rc.sysinit: Loading default keymap succeeded 
Oct 31 13:34:27 lccmay8 rc.sysinit: Setting hostname lccmay8.jpn.hp.com:  succeeded 
Oct 31 13:35:04 lccmay8 kernel: hda: GB0250EAFJF, ATA DISK drive
Oct 31 13:34:28 lccmay8 rc.sysinit: Checking root filesystem succeeded 
Oct 31 13:34:28 lccmay8 rc.sysinit: Remounting root filesystem in read-write mode:  succeeded 
Oct 31 13:35:04 lccmay8 kernel: hdc: GB0250EAFJF, ATA DISK drive
Oct 31 13:34:30 lccmay8 lvm.static:   2 logical volume(s) in volume group VolGroup00 now active 
Oct 31 13:34:30 lccmay8 rc.sysinit: Setting up Logical Volume Management: succeeded 
Oct 31 13:34:30 lccmay8 rc.sysinit: Checking filesystems succeeded 
Oct 31 13:34:30 lccmay8 rc.sysinit: Mounting local filesystems:  succeeded 
Oct 31 13:34:30 lccmay8 rc.sysinit: Enabling local filesystem quotas:  succeeded 
Oct 31 13:35:04 lccmay8 kernel: Using cfq io scheduler
Oct 31 13:34:31 lccmay8 rc.sysinit: Enabling swap space:  succeeded 
Oct 31 13:35:04 lccmay8 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 31 13:34:31 lccmay8 init: Entering runlevel: 5 
Oct 31 13:35:04 lccmay8 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Oct 31 13:35:04 lccmay8 autofs: automount startup succeeded
Oct 31 13:34:32 lccmay8 microcode_ctl: microcode_ctl 起動 succeeded 
Oct 31 13:35:04 lccmay8 kernel: hda: max request size: 1024KiB
Oct 31 13:34:32 lccmay8 sysstat: Calling the system activity data collector (sadc):  
Oct 31 13:35:04 lccmay8 kernel: hda: 488397168 sectors (250059 MB), CHS=30401/255/63
Oct 31 13:34:32 lccmay8 sysstat:  
Oct 31 13:34:32 lccmay8 rc: sysstat を起動中:  succeeded 
Oct 31 13:35:04 lccmay8 kernel:  hda: hda1 hda2
Oct 31 13:34:32 lccmay8 vgchange:   2 logical volume(s) in volume group "VolGroup00" monitored 
Oct 31 13:35:05 lccmay8 kernel: hdc: max request size: 1024KiB
Oct 31 13:34:32 lccmay8 lvm2-monitor: Starting monitoring for VG VolGroup00: succeeded 
Oct 31 13:35:05 lccmay8 kernel: hdc: 488397168 sectors (250059 MB), CHS=30401/255/63
Oct 31 13:34:32 lccmay8 readahead_early: readahead をバックグランドで起動中:  
Oct 31 13:34:33 lccmay8 rc: readahead_early を起動中:  succeeded 
Oct 31 13:35:05 lccmay8 kernel:  hdc: hdc1
Oct 31 13:34:54 lccmay8 kudzu:  succeeded 
Oct 31 13:35:05 lccmay8 kernel: ide-floppy driver 0.99.newide
Oct 31 13:34:56 lccmay8 pcmcia: Starting PCMCIA services:  
Oct 31 13:35:05 lccmay8 kernel: usbcore: registered new driver hiddev
Oct 31 13:34:56 lccmay8 pcmcia: cardmgr[23552]: no sockets found! 
Oct 31 13:35:05 lccmay8 kernel: usbcore: registered new driver usbhid
Oct 31 13:34:56 lccmay8 cardmgr[23552]: no sockets found! 
Oct 31 13:35:05 lccmay8 kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Oct 31 13:34:56 lccmay8 pcmcia: done. 
Oct 31 13:35:05 lccmay8 kernel: mice: PS/2 mouse device common for all mice
Oct 31 13:34:56 lccmay8 rc: pcmcia を起動中:  succeeded 
Oct 31 13:35:05 lccmay8 kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Oct 31 13:34:56 lccmay8 sysctl: net.ipv4.ip_forward = 0 
Oct 31 13:35:05 lccmay8 kernel: input: PS/2 Generic Mouse on isa0060/serio1
Oct 31 13:34:56 lccmay8 sysctl: net.ipv4.conf.default.rp_filter = 1 
Oct 31 13:35:05 lccmay8 kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Oct 31 13:34:56 lccmay8 sysctl: net.ipv4.conf.default.accept_source_route = 0 
Oct 31 13:35:05 lccmay8 kernel: NET: Registered protocol family 2
Oct 31 13:34:56 lccmay8 sysctl: kernel.sysrq = 0 
Oct 31 13:35:06 lccmay8 kernel: IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
Oct 31 13:34:56 lccmay8 sysctl: kernel.core_uses_pid = 1 
Oct 31 13:35:06 lccmay8 kernel: TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
Oct 31 13:34:56 lccmay8 network: ネットワークパラメーターを設定中:  succeeded 
Oct 31 13:35:06 lccmay8 kernel: TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
Oct 31 13:34:56 lccmay8 network: ループバックインターフェイスを呼び込み中 succeeded 
Oct 31 13:35:06 lccmay8 kernel: TCP: Hash tables configured (established 262144 bind 65536)
Oct 31 13:35:01 lccmay8 network: インターフェース eth0 を活性化中:  succeeded 
Oct 31 13:35:06 lccmay8 kernel: Initializing IPsec netlink socket
Oct 31 13:35:06 lccmay8 kernel: NET: Registered protocol family 1
Oct 31 13:35:06 lccmay8 kernel: NET: Registered protocol family 17
Oct 31 13:35:06 lccmay8 kernel: ACPI wakeup devices: 
Oct 31 13:35:06 lccmay8 kernel: USB4 USB5 USB7 ESB2 EXP1 EXP2 EXP3 EXP4 EXP5 EXP6 USB1 USB2 USB3 USB6 ESB1 PCIB PWRB 
Oct 31 13:35:06 lccmay8 kernel: ACPI: (supports S0 S1 S4 S5)
Oct 31 13:35:06 lccmay8 kernel: Freeing unused kernel memory: 180k freed
Oct 31 13:35:06 lccmay8 kernel: SCSI subsystem initialized
Oct 31 13:35:06 lccmay8 kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Oct 31 13:35:06 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 177
Oct 31 13:35:06 lccmay8 kernel: ata: 0x1F0 IDE port busy
Oct 31 13:35:06 lccmay8 kernel: ata: conflict with ide0
Oct 31 13:35:06 lccmay8 kernel: ata: 0x170 IDE port busy
Oct 31 13:35:06 lccmay8 kernel: ata: conflict with ide1
Oct 31 13:35:06 lccmay8 kernel: ata_piix: probe of 0000:00:1f.2 failed with error -16
Oct 31 13:35:06 lccmay8 kernel: ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
Oct 31 13:35:06 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 18 (level, low) -> IRQ 185
Oct 31 13:35:06 lccmay8 kernel: ata1: SATA max UDMA/133 cmd 0x1C68 ctl 0x1C5E bmdma 0x1C30 irq 185
Oct 31 13:35:06 lccmay8 kernel: ata2: SATA max UDMA/133 cmd 0x1C60 ctl 0x1C5A bmdma 0x1C38 irq 185
Oct 31 13:35:06 lccmay8 kernel: scsi0 : ata_piix
Oct 31 13:35:06 lccmay8 kernel: scsi1 : ata_piix
Oct 31 13:35:06 lccmay8 kernel: ata2.00: ATAPI, max UDMA/33
Oct 31 13:35:06 lccmay8 kernel: ata2.00: applying bridge limits
Oct 31 13:35:06 lccmay8 kernel: ata2.00: configured for UDMA/33
Oct 31 13:35:06 lccmay8 kernel:   Vendor: TEAC      Model: DV-W28E-RW        Rev: G.B2
Oct 31 13:35:06 lccmay8 kernel:   Type:   CD-ROM                             ANSI SCSI revision: 05
Oct 31 13:35:06 lccmay8 kernel: device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com
Oct 31 13:35:06 lccmay8 kernel: kjournald starting.  Commit interval 5 seconds
Oct 31 13:35:06 lccmay8 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 31 13:35:06 lccmay8 kernel: SELinux:  Disabled at runtime.
Oct 31 13:35:06 lccmay8 kernel: sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Oct 31 13:35:06 lccmay8 kernel: Uniform CD-ROM driver Revision: 3.20
Oct 31 13:35:06 lccmay8 kernel: warning: many lost ticks.
Oct 31 13:35:06 lccmay8 kernel: Your time source seems to be instable or some driver is hogging interupts
Oct 31 13:35:06 lccmay8 kernel: rip __do_softirq+0x41/0xa2
Oct 31 13:35:06 lccmay8 kernel: inserting floppy driver for 2.6.9-78.EL
Oct 31 13:35:06 lccmay8 kernel: floppy0: no floppy controllers found
Oct 31 13:35:06 lccmay8 kernel: tg3.c:v3.86 (November 9, 2007)
Oct 31 13:35:06 lccmay8 kernel: ACPI: PCI Interrupt 0000:0e:00.0[A] -> GSI 17 (level, low) -> IRQ 177
Oct 31 13:35:06 lccmay8 kernel: eth0: Tigon3 [partno(N/A) rev a200 PHY(5722/5756)] (PCI Express) 10/100/1000Base-T Ethernet 00:1f:29:0e:4a:0c
Oct 31 13:35:06 lccmay8 kernel: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
Oct 31 13:35:06 lccmay8 kernel: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
Oct 31 13:35:06 lccmay8 kernel: hw_random hardware driver 1.0.0 loaded
Oct 31 13:35:06 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 185
Oct 31 13:35:06 lccmay8 kernel: ehci_hcd 0000:00:1a.7: EHCI Host Controller
Oct 31 13:35:06 lccmay8 kernel: ehci_hcd 0000:00:1a.7: irq 185, pci mem ffffff0000024000
Oct 31 13:35:07 lccmay8 kernel: ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Oct 31 13:35:07 lccmay8 kernel: ehci_hcd 0000:00:1a.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
Oct 31 13:35:07 lccmay8 kernel: hub 1-0:1.0: USB hub found
Oct 31 13:35:07 lccmay8 kernel: hub 1-0:1.0: 6 ports detected
Oct 31 13:35:07 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 169
Oct 31 13:35:07 lccmay8 kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Oct 31 13:35:07 lccmay8 kernel: ehci_hcd 0000:00:1d.7: irq 169, pci mem ffffff000002a400
Oct 31 13:35:07 lccmay8 kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Oct 31 13:35:07 lccmay8 kernel: ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
Oct 31 13:35:07 lccmay8 kernel: hub 2-0:1.0: USB hub found
Oct 31 13:35:07 lccmay8 kernel: hub 2-0:1.0: 6 ports detected
Oct 31 13:35:07 lccmay8 kernel: USB Universal Host Controller Interface driver v2.2
Oct 31 13:35:07 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 169
Oct 31 13:35:07 lccmay8 kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
Oct 31 13:35:07 lccmay8 kernel: uhci_hcd 0000:00:1a.0: irq 169, io base 0000000000001820
Oct 31 13:35:07 lccmay8 kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Oct 31 13:35:07 lccmay8 kernel: hub 3-0:1.0: USB hub found
Oct 31 13:35:07 lccmay8 kernel: hub 3-0:1.0: 2 ports detected
Oct 31 13:35:07 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 177
Oct 31 13:35:07 lccmay8 kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
Oct 31 13:35:07 lccmay8 kernel: uhci_hcd 0000:00:1a.1: irq 177, io base 0000000000001840
Oct 31 13:35:07 lccmay8 kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Oct 31 13:35:07 lccmay8 kernel: hub 4-0:1.0: USB hub found
Oct 31 13:35:07 lccmay8 kernel: hub 4-0:1.0: 2 ports detected
Oct 31 13:35:07 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 185
Oct 31 13:35:07 lccmay8 kernel: uhci_hcd 0000:00:1a.2: UHCI Host Controller
Oct 31 13:35:07 lccmay8 kernel: uhci_hcd 0000:00:1a.2: irq 185, io base 0000000000001860
Oct 31 13:35:07 lccmay8 kernel: uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
Oct 31 13:35:07 lccmay8 kernel: hub 5-0:1.0: USB hub found
Oct 31 13:35:07 lccmay8 kernel: hub 5-0:1.0: 2 ports detected
Oct 31 13:35:07 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
Oct 31 13:35:07 lccmay8 kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Oct 31 13:35:07 lccmay8 kernel: uhci_hcd 0000:00:1d.0: irq 169, io base 0000000000001880
Oct 31 13:35:07 lccmay8 kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
Oct 31 13:35:07 lccmay8 kernel: hub 6-0:1.0: USB hub found
Oct 31 13:35:07 lccmay8 kernel: hub 6-0:1.0: 2 ports detected
Oct 31 13:35:07 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 177
Oct 31 13:35:07 lccmay8 kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Oct 31 13:35:07 lccmay8 kernel: uhci_hcd 0000:00:1d.1: irq 177, io base 00000000000018a0
Oct 31 13:35:07 lccmay8 kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
Oct 31 13:35:07 lccmay8 kernel: hub 7-0:1.0: USB hub found
Oct 31 13:35:07 lccmay8 kernel: hub 7-0:1.0: 2 ports detected
Oct 31 13:35:07 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
Oct 31 13:35:07 lccmay8 kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Oct 31 13:35:07 lccmay8 kernel: uhci_hcd 0000:00:1d.2: irq 185, io base 00000000000018c0
Oct 31 13:35:07 lccmay8 kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
Oct 31 13:35:07 lccmay8 kernel: hub 8-0:1.0: USB hub found
Oct 31 13:35:07 lccmay8 kernel: hub 8-0:1.0: 2 ports detected
Oct 31 13:35:07 lccmay8 kernel: usb 6-2: new full speed USB device using address 2
Oct 31 13:35:07 lccmay8 kernel: md: Autodetecting RAID arrays.
Oct 31 13:35:07 lccmay8 kernel: md: autorun ...
Oct 31 13:35:07 lccmay8 kernel: md: ... autorun DONE.
Oct 31 13:35:07 lccmay8 kernel: input: USB HID v1.11 Keyboard [ServerEngines SE USB Device] on usb-0000:00:1d.0-2
Oct 31 13:35:07 lccmay8 kernel: input: USB HID v1.11 Mouse [ServerEngines SE USB Device] on usb-0000:00:1d.0-2
Oct 31 13:35:07 lccmay8 kernel: NET: Registered protocol family 10
Oct 31 13:35:07 lccmay8 kernel: Disabled Privacy Extensions on device ffffffff80474680(lo)
Oct 31 13:35:07 lccmay8 kernel: IPv6 over IPv4 tunneling driver
Oct 31 13:35:07 lccmay8 kernel: ACPI: Power Button (FF) [PWRF]
Oct 31 13:35:07 lccmay8 kernel: EXT3 FS on dm-0, internal journal
Oct 31 13:35:07 lccmay8 kernel: device-mapper: dm-multipath version 1.0.5 loaded
Oct 31 13:35:07 lccmay8 kernel: loop: loaded (max 8 devices)
Oct 31 13:35:07 lccmay8 kernel: kjournald starting.  Commit interval 5 seconds
Oct 31 13:35:07 lccmay8 kernel: EXT3 FS on hda1, internal journal
Oct 31 13:35:07 lccmay8 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 31 13:35:07 lccmay8 kernel: Adding 4095992k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1
Oct 31 13:35:07 lccmay8 kernel: IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
Oct 31 13:35:07 lccmay8 kernel: microcode: CPU0 updated from revision 0x32 to 0x38, date = 09192007 
Oct 31 13:35:07 lccmay8 kernel: IA-32 Microcode Update Driver v1.14 unregistered
Oct 31 13:35:07 lccmay8 kernel: NET: Registered protocol family 27
Oct 31 13:35:07 lccmay8 kernel: Linux Kernel Card Services
Oct 31 13:35:07 lccmay8 kernel:   options:  [pci] [cardbus] [pm]
Oct 31 13:35:07 lccmay8 kernel: ip_tables: (C) 2000-2002 Netfilter core team
Oct 31 13:35:07 lccmay8 kernel: ip_tables: (C) 2000-2002 Netfilter core team
Oct 31 13:35:07 lccmay8 kernel: MSI INIT SUCCESS
Oct 31 13:35:07 lccmay8 kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 31 13:35:07 lccmay8 kernel: tg3: eth0: Link is up at 100 Mbps, full duplex.
Oct 31 13:35:07 lccmay8 kernel: tg3: eth0: Flow control is on for TX and on for RX.
Oct 31 13:35:07 lccmay8 kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Oct 31 13:35:07 lccmay8 kernel: i2c /dev entries driver
Oct 31 13:35:10 lccmay8 smartd[23866]: smartd version 5.33 [x86_64-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen 
Oct 31 13:35:10 lccmay8 smartd[23866]: Home page is http://smartmontools.sourceforge.net/  
Oct 31 13:35:10 lccmay8 smartd[23866]: Opened configuration file /etc/smartd.conf 
Oct 31 13:35:10 lccmay8 smartd[23866]: Configuration file /etc/smartd.conf parsed. 
Oct 31 13:35:10 lccmay8 smartd[23866]: Device: /dev/hda, opened 
Oct 31 13:35:10 lccmay8 smartd[23866]: Device: /dev/hda, not found in smartd database. 
Oct 31 13:35:10 lccmay8 smartd[23866]: Device: /dev/hda, is SMART capable. Adding to "monitor" list. 
Oct 31 13:35:10 lccmay8 smartd[23866]: Device: /dev/hdc, opened 
Oct 31 13:35:10 lccmay8 smartd[23866]: Device: /dev/hdc, not found in smartd database. 
Oct 31 13:35:10 lccmay8 smartd[23866]: Device: /dev/hdc, is SMART capable. Adding to "monitor" list. 
Oct 31 13:35:10 lccmay8 smartd[23866]: Monitoring 2 ATA and 0 SCSI devices 
Oct 31 13:35:11 lccmay8 smartd[23868]: smartd has fork()ed into background mode. New PID=23868. 
Oct 31 13:35:11 lccmay8 smartd: smartd 起動 succeeded
Oct 31 13:35:11 lccmay8 acpid: acpid 起動 succeeded
Oct 31 13:35:12 lccmay8 rc: hpoj を起動中:  succeeded
Oct 31 13:35:13 lccmay8 kernel: lp: driver loaded but no devices found
Oct 31 13:35:15 lccmay8 cups: cupsd 起動 succeeded
Oct 31 13:35:16 lccmay8 sshd: RSA1 キー生成 succeeded
Oct 31 13:35:16 lccmay8 sshd: RSA キー生成 succeeded
Oct 31 13:35:16 lccmay8 sshd: DSA キー生成 succeeded
Oct 31 13:35:16 lccmay8 sshd:  succeeded
Oct 31 13:35:16 lccmay8 xinetd: xinetd 起動 succeeded
Oct 31 13:35:17 lccmay8 xinetd[23973]: xinetd Version 2.3.13 started with libwrap loadavg options compiled in.
Oct 31 13:35:17 lccmay8 xinetd[23973]: Started working: 1 available service
Oct 31 13:35:17 lccmay8 sendmail[23991]: sql_select option missing
Oct 31 13:35:17 lccmay8 sendmail[23991]: auxpropfunc error no mechanism available 
Oct 31 13:35:18 lccmay8 sendmail: sendmail 起動 succeeded
Oct 31 13:35:18 lccmay8 sendmail: sm-client 起動 succeeded
Oct 31 13:35:18 lccmay8 gpm[24012]: *** info [startup.c(95)]: 
Oct 31 13:35:18 lccmay8 gpm[24012]: Started gpm successfully. Entered daemon mode.
Oct 31 13:35:18 lccmay8 gpm[24012]: *** info [mice.c(1766)]: 
Oct 31 13:35:18 lccmay8 gpm[24012]: imps2: Auto-detected intellimouse PS/2
Oct 31 13:35:18 lccmay8 gpm: gpm 起動 succeeded
Oct 31 13:35:19 lccmay8 iiim: htt 起動 succeeded
Oct 31 13:35:21 lccmay8 htt_server[24044]: started.
Oct 31 13:35:23 lccmay8 canna:  succeeded
Oct 31 13:35:23 lccmay8 crond: crond 起動 succeeded
Oct 31 13:35:27 lccmay8 xfs: xfs 起動 succeeded
Oct 31 13:35:27 lccmay8 anacron: anacron 起動 succeeded
Oct 31 13:35:27 lccmay8 atd: atd 起動 succeeded
Oct 31 13:35:27 lccmay8 atd:  succeeded
Oct 31 13:35:31 lccmay8 gconfd (root-24196): 起動中 (バージョン 2.8.1), PID 24196 ユーザ 'root'
Oct 31 13:35:31 lccmay8 gconfd (root-24196): 読み込み専用の設定ソースに対するアドレス "xml:readonly:/etc/gconf/gconf.xml.mandatory" (0 行目) を解決しました
Oct 31 13:35:31 lccmay8 gconfd (root-24196): 書き込み可能な設定ソースに対するアドレス "xml:readwrite:/root/.gconf" (1 行目) を解決しました
Oct 31 13:35:31 lccmay8 gconfd (root-24196): 読み込み専用の設定ソースに対するアドレス "xml:readonly:/etc/gconf/gconf.xml.defaults" (2 行目) を解決しました
Oct 31 13:38:06 lccmay8 firstboot:  succeeded
Oct 31 13:38:06 lccmay8 readahead: readahead をバックグランドで起動中: 
Oct 31 13:38:07 lccmay8 rc: readahead を起動中:  succeeded
Oct 31 13:38:08 lccmay8 messagebus: messagebus 起動 succeeded
Oct 31 13:38:08 lccmay8 cups-config-daemon: cups-config-daemon 起動 succeeded
Oct 31 13:38:08 lccmay8 haldaemon: haldaemon 起動 succeeded
Oct 31 13:38:10 lccmay8 fstab-sync[24558]: removed all generated mount points
Oct 31 13:38:11 lccmay8 gpm[24012]: *** info [mice.c(1766)]: 
Oct 31 13:38:11 lccmay8 gpm[24012]: imps2: Auto-detected intellimouse PS/2
Oct 31 13:38:13 lccmay8 fstab-sync[25201]: added mount point /media/cdrecorder for /dev/scd0
Oct 31 13:38:32 lccmay8 gconfd (root-24196): GConf サーバが使用されていません。シャットダウンします。
Oct 31 13:38:32 lccmay8 gconfd (root-24196): 終了します。
Oct 31 13:55:03 lccmay8 login(pam_unix)[24357]: session opened for user root by LOGIN(uid=0)
Oct 31 13:55:03 lccmay8  -- root[24357]: ROOT LOGIN ON tty1