Bootdata ok (command line is ro root=/dev/VolGroup00/LogVol00 rhgb quiet) Linux version 2.6.9-78.EL (mockbuild@builder10.centos.org) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-10)) #1 Thu Jul 24 23:45:16 EDT 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fea0000 (usable) BIOS-e820: 000000007fea0000 - 000000007feac000 (ACPI data) BIOS-e820: 000000007feac000 - 000000007fead000 (ACPI NVS) BIOS-e820: 000000007fead000 - 0000000080000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) ACPI: RSDP (v002 HP ) @ 0x00000000000f74c0 ACPI: XSDT (v001 HP ProLiant 0x06040000 LTP 0x00000000) @ 0x000000007fea6e9a ACPI: FADT (v003 HP ProLiant 0x06040000 PTL 0x00000002) @ 0x000000007feab865 ACPI: SPMI (v005 HP ProLiant 0x06040000 PTL 0x00000001) @ 0x000000007feab959 ACPI: EINJ (v001 HP ProLiant 0x06040000 PTL 0x00000001) @ 0x000000007feab999 ACPI: HEST (v001 HP ProLiant 0x06040000 PTL 0x00000001) @ 0x000000007feabb49 ACPI: BERT (v001 HP ProLiant 0x06040000 PTL 0x00000001) @ 0x000000007feabb71 ACPI: SSDT (v001 HP ProLiant 0x06040000 INTL 0x20050624) @ 0x000000007feabba1 ACPI: ERST (v001 HP ProLiant 0x06040000 PTL 0x00000001) @ 0x000000007feabc82 ACPI: MCFG (v001 HP ProLiant 0x06040000 LTP 0x00000000) @ 0x000000007feabef2 ACPI: MADT (v001 HP ProLiant 0x06040000 LTP 0x00000000) @ 0x000000007feabf2e ACPI: BOOT (v001 HP ProLiant 0x06040000 LTP 0x00000001) @ 0x000000007feabf88 ACPI: SPCR (v001 HP ProLiant 0x06040000 PTL 0x00000001) @ 0x000000007feabfb0 ACPI: SSDT (v001 HP CpuPm 0x00003000 INTL 0x20050228) @ 0x000000007fea6f1e ACPI: DSDT (v001 HP ProLiant 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000 On node 0 totalpages: 523837 DMA zone: 3997 pages, LIFO batch:1 Normal zone: 519840 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI present. ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:6 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Setting APIC routing to flat ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) Checking aperture... Built 1 zonelists Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet console=tty0 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 3.579545 MHz PM timer. time.c: Detected 1600.047 MHz processor. time.c: Using PIT/TSC based timekeeping. Console: colour VGA+ 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Memory: 2056508k/2095744k available (2495k kernel code, 38500k reserved, 1380k data, 180k init) Calibrating delay using timer specific routine.. 3203.88 BogoMIPS (lpj=1601943) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 (order: 0, 4096 bytes) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 512K using mwait in idle threads. CPU: Intel(R) Celeron(R) CPU 420 @ 1.60GHz stepping 01 ACPI: System reset via FADT Reset Register is supported activating NMI Watchdog ... done. testing NMI watchdog ... OK. Using local APIC timer interrupts. Detected 12.500 MHz APIC timer. checking if image is initramfs... it is NET: Registered protocol family 16 PCI: Using configuration type 1 PCI: Using MMCONFIG at f0000000 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 169 GSI 17 sharing vector 0xB1 and IRQ 17 ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 177 GSI 18 sharing vector 0xB9 and IRQ 18 ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 185 ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 185 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 177 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 177 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 177 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 177 ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 18 (level, low) -> IRQ 185 ACPI: PCI Interrupt 0000:0d:00.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI Interrupt 0000:0e:00.0[A] -> GSI 17 (level, low) -> IRQ 177 PCI-DMA: Disabling IOMMU. Simple Boot Flag at 0x44 set to 0x80 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1225460012.423:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 3539EB86374B5B75 - User ID: CentOS (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU0] (supports C1) Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hda: GB0250EAFJF, ATA DISK drive Probing IDE interface ide1... hdc: GB0250EAFJF, ATA DISK drive Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 488397168 sectors (250059 MB), CHS=30401/255/63 hda: cache flushes supported hda: hda1 hda2 hdc: max request size: 1024KiB hdc: 488397168 sectors (250059 MB), CHS=30401/255/63 hdc: cache flushes supported hdc: hdc1 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: PS/2 Generic Mouse on isa0060/serio1 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) TCP: Hash tables configured (established 262144 bind 65536) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI wakeup devices: USB4 USB5 USB7 ESB2 EXP1 EXP2 EXP3 EXP4 EXP5 EXP6 USB1 USB2 USB3 USB6 ESB1 PCIB PWRB ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 180k freed SCSI subsystem initialized libata version 2.00 loaded. ata_piix 0000:00:1f.2: version 2.00ac7 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 177 ata: 0x1F0 IDE port busy ata: conflict with ide0 ata: 0x170 IDE port busy ata: conflict with ide1 ata_piix: probe of 0000:00:1f.2 failed with error -16 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 18 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1f.5 to 64 ata1: SATA max UDMA/133 cmd 0x1C68 ctl 0x1C5E bmdma 0x1C30 irq 185 ata2: SATA max UDMA/133 cmd 0x1C60 ctl 0x1C5A bmdma 0x1C38 irq 185 scsi0 : ata_piix scsi1 : ata_piix ata2.00: ATAPI, max UDMA/33 ata2.00: applying bridge limits ata2.00: configured for UDMA/33 Vendor: TEAC Model: DV-W28E-RW Rev: G.B2 Type: CD-ROM ANSI SCSI revision: 05 device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Losing some ticks... checking if CPU frequency changed. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0 warning: many lost ticks. Your time source seems to be instable or some driver is hogging interupts rip __do_softirq+0x41/0xa2 inserting floppy driver for 2.6.9-78.EL floppy0: no floppy controllers found tg3.c:v3.86 (November 9, 2007) ACPI: PCI Interrupt 0000:0e:00.0[A] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:0e:00.0 to 64 divert: allocating divert_blk for eth0 eth0: Tigon3 [partno(N/A) rev a200 PHY(5722/5756)] (PCI Express) 10/100/1000Base-T Ethernet 00:1f:29:0e:4a:0c eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] hw_random hardware driver 1.0.0 loaded ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 185 ehci_hcd 0000:00:1a.7: EHCI Host Controller PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: irq 185, pci mem ffffff0000024000 ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 169 ehci_hcd 0000:00:1d.7: EHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 169, pci mem ffffff000002a400 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 169 uhci_hcd 0000:00:1a.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: irq 169, io base 0000000000001820 uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 177 uhci_hcd 0000:00:1a.1: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: irq 177, io base 0000000000001840 uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 185 uhci_hcd 0000:00:1a.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1a.2 to 64 uhci_hcd 0000:00:1a.2: irq 185, io base 0000000000001860 uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169 uhci_hcd 0000:00:1d.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 169, io base 0000000000001880 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 177 uhci_hcd 0000:00:1d.1: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 177, io base 00000000000018a0 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185 uhci_hcd 0000:00:1d.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 185, io base 00000000000018c0 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected usb 6-2: new full speed USB device using address 2 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. input: USB HID v1.11 Keyboard [ServerEngines SE USB Device] on usb-0000:00:1d.0-2 input: USB HID v1.11 Mouse [ServerEngines SE USB Device] on usb-0000:00:1d.0-2 NET: Registered protocol family 10 Disabled Privacy Extensions on device ffffffff80474680(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 ACPI: Power Button (FF) [PWRF] EXT3 FS on dm-0, internal journal device-mapper: dm-multipath version 1.0.5 loaded loop: loaded (max 8 devices) kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 4095992k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 IA-32 Microcode Update Driver: v1.14 microcode: CPU0 updated from revision 0x32 to 0x38, date = 09192007 IA-32 Microcode Update Driver v1.14 unregistered NET: Registered protocol family 27 Linux Kernel Card Services options: [pci] [cardbus] [pm] ip_tables: (C) 2000-2002 Netfilter core team ip_tables: (C) 2000-2002 Netfilter core team MSI INIT SUCCESS ADDRCONF(NETDEV_UP): eth0: link is not ready tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready i2c /dev entries driver eth0: no IPv6 routers present lp: driver loaded but no devices found