Linux version 2.6.9-78.EL (mockbuild@builder16.centos.org) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-10)) #1 Thu Jul 24 23:46:01 EDT 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fea0000 (usable) BIOS-e820: 000000007fea0000 - 000000007feac000 (ACPI data) BIOS-e820: 000000007feac000 - 000000007fead000 (ACPI NVS) BIOS-e820: 000000007fead000 - 0000000080000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 1150MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f74f0 Using x86 segment limits to approximate NX protection zapping low mappings. On node 0 totalpages: 523936 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 294560 pages, LIFO batch:16 DMI present. ACPI: RSDP (v002 HP ) @ 0x000f74c0 ACPI: XSDT (v001 HP ProLiant 0x06040000 LTP 0x00000000) @ 0x7fea6e9a ACPI: FADT (v003 HP ProLiant 0x06040000 PTL 0x00000002) @ 0x7feab865 ACPI: SPMI (v005 HP ProLiant 0x06040000 PTL 0x00000001) @ 0x7feab959 ACPI: EINJ (v001 HP ProLiant 0x06040000 PTL 0x00000001) @ 0x7feab999 ACPI: HEST (v001 HP ProLiant 0x06040000 PTL 0x00000001) @ 0x7feabb49 ACPI: BERT (v001 HP ProLiant 0x06040000 PTL 0x00000001) @ 0x7feabb71 ACPI: SSDT (v001 HP ProLiant 0x06040000 INTL 0x20050624) @ 0x7feabba1 ACPI: ERST (v001 HP ProLiant 0x06040000 PTL 0x00000001) @ 0x7feabc82 ACPI: MCFG (v001 HP ProLiant 0x06040000 LTP 0x00000000) @ 0x7feabef2 ACPI: MADT (v001 HP ProLiant 0x06040000 LTP 0x00000000) @ 0x7feabf2e ACPI: BOOT (v001 HP ProLiant 0x06040000 LTP 0x00000001) @ 0x7feabf88 ACPI: SPCR (v001 HP ProLiant 0x06040000 PTL 0x00000001) @ 0x7feabfb0 ACPI: SSDT (v001 HP CpuPm 0x00003000 INTL 0x20050228) @ 0x7fea6f1e ACPI: DSDT (v001 HP ProLiant 0x06040000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 7:6 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Enabling APIC mode: Flat. Using 0 I/O APICs ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) Built 1 zonelists Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet mapped APIC to ffffd000 (fee00000) Initializing CPU#0 CPU 0 irqstacks, hard=c0418000 soft=c0417000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 1600.437 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2072488k/2095744k available (2209k kernel code, 22324k reserved, 745k data, 172k init, 1178240k highmem) Calibrating delay using timer specific routine.. 3202.53 BogoMIPS (lpj=1601266) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: afebfbff 20100000 00000000 00000000 CPU: After vendor identify, caps: afebfbff 20100000 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 512K CPU: After all inits, caps: afebf3ff 20100000 00000000 00000140 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Celeron(R) CPU 420 @ 1.60GHz stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: System reset via FADT Reset Register is supported ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 checking if image is initramfs... it is Freeing initrd memory: 1304k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 3.00 entry at 0xfde5e, last bus=17 PCI: Using MMCONFIG mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 177 ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 185 ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 185 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 177 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 177 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 177 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 177 ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 18 (level, low) -> IRQ 185 ACPI: PCI Interrupt 0000:0d:00.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI Interrupt 0000:0e:00.0[A] -> GSI 17 (level, low) -> IRQ 177 Simple Boot Flag at 0x44 set to 0x80 apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1224611158.020:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 546A4C2153FB685E - User ID: CentOS (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU0] (supports C1) Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hda: GB0250EAFJF, ATA DISK drive Probing IDE interface ide1... hdc: GB0250EAFJF, ATA DISK drive Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 488397168 sectors (250059 MB), CHS=30401/255/63 hda: cache flushes supported hda: hda1 hda2 hdc: max request size: 1024KiB hdc: 488397168 sectors (250059 MB), CHS=30401/255/63 hdc: cache flushes supported hdc: hdc1 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: PS/2 Generic Mouse on isa0060/serio1 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 6, 262144 bytes) TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 131072 (order: 9, 3670016 bytes) TCP: Hash tables configured (established 262144 bind 131072) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI wakeup devices: USB4 USB5 USB7 ESB2 EXP1 EXP2 EXP3 EXP4 EXP5 EXP6 USB1 USB2 USB3 USB6 ESB1 PCIB PWRB ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 172k freed SCSI subsystem initialized libata version 2.00 loaded. ata_piix 0000:00:1f.2: version 2.00ac7 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 177 ata: 0x1F0 IDE port busy ata: conflict with ide0 ata: 0x170 IDE port busy ata: conflict with ide1 ata_piix: probe of 0000:00:1f.2 failed with error -16 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 18 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1f.5 to 64 ata1: SATA max UDMA/133 cmd 0x1C68 ctl 0x1C5E bmdma 0x1C30 irq 185 ata2: SATA max UDMA/133 cmd 0x1C60 ctl 0x1C5A bmdma 0x1C38 irq 185 scsi0 : ata_piix scsi1 : ata_piix ata2.00: ATAPI, max UDMA/33 ata2.00: applying bridge limits ata2.00: configured for UDMA/33 Vendor: TEAC Model: DV-W28E-RW Rev: G.B2 Type: CD-ROM ANSI SCSI revision: 05 device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0 inserting floppy driver for 2.6.9-78.EL floppy0: no floppy controllers found tg3.c:v3.86 (November 9, 2007) ACPI: PCI Interrupt 0000:0e:00.0[A] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:0e:00.0 to 64 divert: allocating divert_blk for eth0 eth0: Tigon3 [partno(N/A) rev a200 PHY(5722/5756)] (PCI Express) 10/100/1000Base-T Ethernet 00:1f:29:0e:4a:0c eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] hw_random hardware driver 1.0.0 loaded ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 185 ehci_hcd 0000:00:1a.7: EHCI Host Controller PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: irq 185, pci mem f8882000 ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 169 ehci_hcd 0000:00:1d.7: EHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 169, pci mem f88ba400 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 169 uhci_hcd 0000:00:1a.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: irq 169, io base 00001820 uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 177 uhci_hcd 0000:00:1a.1: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: irq 177, io base 00001840 uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 185 uhci_hcd 0000:00:1a.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1a.2 to 64 uhci_hcd 0000:00:1a.2: irq 185, io base 00001860 uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169 uhci_hcd 0000:00:1d.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 169, io base 00001880 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 177 uhci_hcd 0000:00:1d.1: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 177, io base 000018a0 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185 uhci_hcd 0000:00:1d.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 185, io base 000018c0 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected usb 6-2: new full speed USB device using address 2 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. input: USB HID v1.11 Keyboard [ServerEngines SE USB Device] on usb-0000:00:1d.0-2 input: USB HID v1.11 Mouse [ServerEngines SE USB Device] on usb-0000:00:1d.0-2 NET: Registered protocol family 10 Disabled Privacy Extensions on device c0396540(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 ACPI: Power Button (FF) [PWRF] EXT3 FS on dm-0, internal journal device-mapper: dm-multipath version 1.0.5 loaded loop: loaded (max 8 devices) kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 4128760k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1