Linux version 2.6.9-67.ELsmp (mockbuild@builder10.centos.org) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-9)) #1 SMP Fri Nov 16 12:48:03 EST 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
 BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000d7e66000 (usable)
 BIOS-e820: 00000000d7e66000 - 00000000d7e6e000 (ACPI data)
 BIOS-e820: 00000000d7e6e000 - 00000000d7e6f000 (usable)
 BIOS-e820: 00000000d7e6f000 - 00000000d8000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
 BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000127fff000 (usable)
3839MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f4f80
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 1212415
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 225280 pages, LIFO batch:16
  HighMem zone: 983039 pages, LIFO batch:16
DMI 2.4 present.
Using APIC driver default
ACPI: RSDP (v002 HP                                    ) @ 0x000f4f00
ACPI: XSDT (v001 HP     ProLiant 0x00000002 Ò 0x0000162e) @ 0xd7e667c0
ACPI: FADT (v003 HP     ProLiant 0x00000002 Ò 0x0000162e) @ 0xd7e66840
ACPI: SPCR (v001 HP     SPCRRBSU 0x00000001 Ò 0x0000162e) @ 0xd7e66140
ACPI: MCFG (v001 HP     ProLiant 0x00000001  0x00000000) @ 0xd7e661c0
ACPI: HPET (v001 HP     ProLiant 0x00000002 Ò 0x0000162e) @ 0xd7e66200
ACPI: SPMI (v005 HP     ProLiant 0x00000001 Ò 0x0000162e) @ 0xd7e66240
ACPI: ERST (v001 HP     ProLiant 0x00000001 Ò 0x0000162e) @ 0xd7e66280
ACPI: MADT (v001 HP     ProLiant 0x00000002  0x00000000) @ 0xd7e66480
ACPI: FFFF (v001 HP     ProLiant 0x00000001 Ò 0x0000162e) @ 0xd7e66540
ACPI: BERT (v001 HP     ProLiant 0x00000001 Ò 0x0000162e) @ 0xd7e666c0
ACPI: HEST (v001 HP     ProLiant 0x00000001 Ò 0x0000162e) @ 0xd7e66700
ACPI: DSDT (v001 HP         DSDT 0x00000001 INTL 0x20030228) @ 0x00000000
ServerWorks chipset detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Processor #3 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
Enabling APIC mode:  Flat.  Using 0 I/O APICs
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0x10228201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at dc000000 (gap: d8000000:26c00000)
Built 1 zonelists
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
mapped APIC to ffffd000 (fee00000)
Initializing CPU#0
CPU 0 irqstacks, hard=c03f6000 soft=c03d6000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 4146796k/4849660k available (1892k kernel code, 44920k reserved, 768k data, 192k init, 3275160k highmem)
Using HPET for base-timer
Using HPET for gettimeofday
Detected 2128.076 MHz processor.
Using hpet for high-res timesource
Calibrating delay using timer specific routine.. 4258.67 BogoMIPS (lpj=2129337)
Security Scaffold v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000
CPU: After vendor identify, caps:  bfebfbff 20000000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU0: Physical Processor ID: 0
CPU0: Processor Core ID: 0
CPU0: Initial APIC ID: 0
CPU: After all inits, caps:        bfebf3ff 20000000 00000000 00000140
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Xeon(R) CPU           X3210  @ 2.13GHz stepping 0b
per-CPU timeslice cutoff: 11701.44 usecs.
task migration cache decay timeout: 11 msecs.
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c03f7000 soft=c03d7000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4255.95 BogoMIPS (lpj=2127976)
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000
CPU: After vendor identify, caps:  bfebfbff 20000000 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU1: Physical Processor ID: 0
CPU1: Processor Core ID: 1
CPU1: Initial APIC ID: 1
CPU: After all inits, caps:        bfebf3ff 20000000 00000000 00000140
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Xeon(R) CPU           X3210  @ 2.13GHz stepping 0b
Booting processor 2/2 eip 3000
CPU 2 irqstacks, hard=c03f8000 soft=c03d8000
Initializing CPU#2
Calibrating delay using timer specific routine.. 4256.02 BogoMIPS (lpj=2128014)
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000
CPU: After vendor identify, caps:  bfebfbff 20000000 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU2: Physical Processor ID: 0
CPU2: Processor Core ID: 2
CPU2: Initial APIC ID: 2
CPU: After all inits, caps:        bfebf3ff 20000000 00000000 00000140
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel(R) Xeon(R) CPU           X3210  @ 2.13GHz stepping 0b
Booting processor 3/3 eip 3000
CPU 3 irqstacks, hard=c03f9000 soft=c03d9000
Initializing CPU#3
Calibrating delay using timer specific routine.. 4255.99 BogoMIPS (lpj=2127999)
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000
CPU: After vendor identify, caps:  bfebfbff 20000000 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU3: Physical Processor ID: 0
CPU3: Processor Core ID: 3
CPU3: Initial APIC ID: 3
CPU: After all inits, caps:        bfebf3ff 20000000 00000000 00000140
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel(R) Xeon(R) CPU           X3210  @ 2.13GHz stepping 0b
Total of 4 processors activated (17026.65 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking TSC synchronization across 4 CPUs: passed.
Brought up 4 CPUs
zapping low mappings.
checking if image is initramfs... it is
Freeing initrd memory: 1292k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 3.00 entry at 0xf0072, last bus=26
PCI: Using MMCONFIG
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHE.BCME._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG2._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 *11)
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 177
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 185
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 193
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 201
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 201
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 201
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 21 (level, low) -> IRQ 201
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 201
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 20 (level, low) -> IRQ 209
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 20 (level, low) -> IRQ 209
ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:03:04.1[B] -> GSI 17 (level, low) -> IRQ 193
ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 21 (level, low) -> IRQ 201
ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 22 (level, low) -> IRQ 217
ACPI: PCI Interrupt 0000:01:04.2[B] -> GSI 23 (level, low) -> IRQ 225
ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 23 (level, low) -> IRQ 225
ACPI: PCI Interrupt 0000:01:04.6[A] -> GSI 22 (level, low) -> IRQ 217
PCI: Device 00:00 not found by BIOS
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1232457124.898:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key CF3BB4B0ED2ED3CE
- User ID: CentOS (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
ACPI: Processor [CPU2] (supports C1)
ACPI: Processor [CPU3] (supports C1)
ACPI: Thermal Zone [THM0] (8 C)
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 262144 (order: 9, 3145728 bytes)
TCP: Hash tables configured (established 262144 bind 262144)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices: 

ACPI: (supports S0 S4 S5)
Freeing unused kernel memory: 192k freed
SCSI subsystem initialized
HP CISS Driver (v 2.6.16.RH1)
cciss: Device 0x3230 has been found at bus 21 dev 0 func 0
ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 169
MSI INIT SUCCESS
cciss: using DAC cycles
      blocks= 20481599 block_size= 512
      heads= 255, sectors= 32, cylinders= 2510

Using cfq io scheduler
      blocks= 20481599 block_size= 512
      heads= 255, sectors= 32, cylinders= 2510

 cciss/c0d0: p1 p2
libata version 2.00 loaded.
ata_piix 0000:00:1f.2: version 2.00ac7
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 20 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1080 ctl 0x108A bmdma 0x10A0 irq 209
ata2: SATA max UDMA/133 cmd 0x1090 ctl 0x109A bmdma 0x10A8 irq 209
scsi0 : ata_piix
scsi1 : ata_piix
ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 20 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:00:1f.5 to 64
ata3: SATA max UDMA/133 cmd 0x10C0 ctl 0x10CA bmdma 0x10E0 irq 209
ata4: SATA max UDMA/133 cmd 0x10D0 ctl 0x10DA bmdma 0x10E8 irq 209
scsi2 : ata_piix
ata3.00: ATAPI, max UDMA/33
ata3.00: applying bridge limits
ata3.00: configured for UDMA/33
scsi3 : ata_piix
  Vendor: HL-DT-ST  Model: RW/DVD GCC-M10N   Rev: 2.02
  Type:   CD-ROM                             ANSI SCSI revision: 05
device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security:  3 users, 4 roles, 356 types, 26 bools
security:  55 classes, 22665 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi2, channel 0, id 0, lun 0
inserting floppy driver for 2.6.9-67.ELsmp
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
tg3.c:v3.77 (May 31, 2007)
ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 16 (level, low) -> IRQ 169
divert: allocating divert_blk for eth0
eth0: Tigon3 [partno(N/A) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:1f:29:bd:58:5c
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76148000] dma_mask[64-bit]
ACPI: PCI Interrupt 0000:03:04.1[B] -> GSI 17 (level, low) -> IRQ 193
divert: allocating divert_blk for eth1
eth1: Tigon3 [partno(N/A) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:1f:29:bd:58:5d
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[76148000] dma_mask[64-bit]
hw_random: cannot enable RNG, aborting
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 201
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 201, io base 00001000
SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 201
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 201, io base 00001020
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 201
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 201, io base 00001040
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 21 (level, low) -> IRQ 201
uhci_hcd 0000:00:1d.3: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: irq 201, io base 00001060
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 23 (level, low) -> IRQ 225
uhci_hcd 0000:01:04.4: UHCI Host Controller
uhci_hcd 0000:01:04.4: irq 225, io base 00003800
uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 5
uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 201
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 201, pci mem f88ce000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 8 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
usb 5-1: new full speed USB device using address 2
input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1
input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
usb 5-2: new full speed USB device using address 3
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 7 ports detected
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0349440(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
mtrr: type mismatch for d8000000,2000000 old: uncachable new: write-combining
ACPI: Power Button (FF) [PWRF]
EXT3 FS on dm-0, internal journal
loop: loaded (max 8 devices)
kjournald starting.  Commit interval 5 seconds
EXT3 FS on cciss/c0d0p1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev cciss/c0d0p1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
microcode: No new microdata for cpu 1
microcode: No new microdata for cpu 2
microcode: No new microdata for cpu 3
microcode: No new microdata for cpu 0
IA-32 Microcode Update Driver v1.14 unregistered
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (8192 buckets, 65536 max) - 340 bytes per conntrack
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is off for TX and off for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
lp: driver loaded but no devices found
eth0: no IPv6 routers present
mtrr: type mismatch for d8000000,2000000 old: uncachable new: write-combining