Jan 20 13:40:28 lccmay8 syslogd 1.4.1: restart.
Jan 20 13:40:28 lccmay8 syslog: syslogd 起動 succeeded
Jan 20 13:40:28 lccmay8 syslog: klogd 起動 succeeded
Jan 20 13:40:28 lccmay8 kernel: klogd 1.4.1, log source = /proc/kmsg started.
Jan 20 13:40:28 lccmay8 kernel: Bootdata ok (command line is ro root=/dev/VolGroup00/LogVol00 rhgb quiet)
Jan 20 13:40:28 lccmay8 kernel: Linux version 2.6.9-67.ELsmp (mockbuild@builder10.centos.org) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-9)) #1 SMP Fri Nov 16 12:49:06 EST 2007
Jan 20 13:40:28 lccmay8 kernel: BIOS-provided physical RAM map:
Jan 20 13:40:28 lccmay8 kernel:  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
Jan 20 13:40:28 lccmay8 kernel:  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
Jan 20 13:40:28 lccmay8 kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Jan 20 13:40:28 lccmay8 kernel:  BIOS-e820: 0000000000100000 - 00000000d7e66000 (usable)
Jan 20 13:40:28 lccmay8 kernel:  BIOS-e820: 00000000d7e66000 - 00000000d7e6e000 (ACPI data)
Jan 20 13:40:28 lccmay8 kernel:  BIOS-e820: 00000000d7e6e000 - 00000000d7e6f000 (usable)
Jan 20 13:40:28 lccmay8 kernel:  BIOS-e820: 00000000d7e6f000 - 00000000d8000000 (reserved)
Jan 20 13:40:28 lccmay8 kernel:  BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
Jan 20 13:40:28 lccmay8 irqbalance: irqbalance 起動 succeeded
Jan 20 13:40:28 lccmay8 kernel:  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
Jan 20 13:40:28 lccmay8 kernel:  BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
Jan 20 13:40:28 lccmay8 portmap: portmap 起動 succeeded
Jan 20 13:40:28 lccmay8 kernel:  BIOS-e820: 0000000100000000 - 0000000127fff000 (usable)
Jan 20 13:40:28 lccmay8 rpc.statd[3305]: Version 1.0.6 Starting
Jan 20 13:40:28 lccmay8 nfslock: rpc.statd 起動 succeeded
Jan 20 13:40:29 lccmay8 kernel: No NUMA configuration found
Jan 20 13:40:29 lccmay8 kernel: Faking a node at 0000000000000000-0000000127fff000
Jan 20 13:40:29 lccmay8 kernel: Bootmem setup node 0 0000000000000000-0000000127fff000
Jan 20 13:40:29 lccmay8 kernel: DMI 2.4 present.
Jan 20 13:40:29 lccmay8 kernel: ServerWorks chipset detected. Disabling timer routing over 8254.
Jan 20 13:40:29 lccmay8 kernel: ACPI: PM-Timer IO Port: 0x908
Jan 20 13:40:29 lccmay8 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Jan 20 13:40:29 lccmay8 kernel: Processor #0 6:15 APIC version 16
Jan 20 13:40:29 lccmay8 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
Jan 20 13:40:29 lccmay8 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Jan 20 13:40:29 lccmay8 rpcidmapd: rpc.idmapd 起動 succeeded
Jan 20 13:40:29 lccmay8 kernel: Processor #2 6:15 APIC version 16
Jan 20 13:40:29 lccmay8 kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
Jan 20 13:40:29 lccmay8 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Jan 20 13:40:29 lccmay8 kernel: Processor #1 6:15 APIC version 16
Jan 20 13:40:29 lccmay8 kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
Jan 20 13:40:29 lccmay8 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Jan 20 13:40:29 lccmay8 kernel: Processor #3 6:15 APIC version 16
Jan 20 13:40:29 lccmay8 kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
Jan 20 13:40:29 lccmay8 netfs: 他のファイルシステムをマウント中:  succeeded
Jan 20 13:40:29 lccmay8 kernel: ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
Jan 20 13:40:29 lccmay8 kernel: Setting APIC routing to flat
Jan 20 13:40:29 lccmay8 kernel: ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
Jan 20 13:40:29 lccmay8 kernel: IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
Jan 20 13:40:29 lccmay8 autofs: automount startup succeeded
Jan 20 13:40:29 lccmay8 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
Jan 20 13:40:30 lccmay8 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jan 20 13:40:30 lccmay8 kernel: ACPI: HPET id: 0x10228201 base: 0xfed00000
Jan 20 13:40:30 lccmay8 kernel: Using ACPI (MADT) for SMP configuration information
Jan 20 13:40:30 lccmay8 kernel: Allocating PCI resources starting at dc000000 (gap: d8000000:26c00000)
Jan 20 13:40:30 lccmay8 kernel: Checking aperture...
Jan 20 13:40:30 lccmay8 kernel: Built 1 zonelists
Jan 20 13:40:30 lccmay8 kernel: Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet console=tty0
Jan 20 13:40:30 lccmay8 kernel: Initializing CPU#0
Jan 20 13:40:30 lccmay8 kernel: PID hash table entries: 4096 (order: 12, 131072 bytes)
Jan 20 13:40:30 lccmay8 kernel: time.c: Using 14.318180 MHz HPET timer.
Jan 20 13:40:30 lccmay8 kernel: time.c: Detected 2128.003 MHz processor.
Jan 20 13:40:30 lccmay8 kernel: Console: colour VGA+ 80x25
Jan 20 13:40:30 lccmay8 kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Jan 20 13:40:30 lccmay8 kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Jan 20 22:39:56 lccmay8 rc.sysinit: -e 
Jan 20 13:40:30 lccmay8 kernel: Placing software IO TLB between 0x1ca2000 - 0x5ca2000
Jan 20 13:39:58 lccmay8 date: 2009年  1月 20日 火曜日 13:39:58 JST 
Jan 20 13:40:30 lccmay8 kernel: Memory: 4040724k/4849660k available (2126k kernel code, 0k reserved, 1313k data, 212k init)
Jan 20 13:39:58 lccmay8 rc.sysinit: Setting clock  (localtime): 2009年  1月 20日 火曜日 13:39:58 JST succeeded 
Jan 20 13:40:30 lccmay8 kernel: Calibrating delay using timer specific routine.. 4259.16 BogoMIPS (lpj=2129580)
Jan 20 13:39:58 lccmay8 udevsend[1300]: starting udevd daemon 
Jan 20 13:40:30 lccmay8 kernel: Security Scaffold v1.0.0 initialized
Jan 20 13:39:58 lccmay8 scsi.agent[1312]: cdrom at /devices/pci0000:00/0000:00:1f.5/host2/target2:0:0/2:0:0:0 
Jan 20 13:40:31 lccmay8 kernel: SELinux:  Initializing.
Jan 20 13:39:59 lccmay8 start_udev: Starting udev:  succeeded 
Jan 20 13:40:02 lccmay8 udevsend[1787]: starting udevd daemon 
Jan 20 13:40:31 lccmay8 kernel: There is already a security framework initialized, register_security failed.
Jan 20 13:40:04 lccmay8 rc.sysinit: -e 
Jan 20 13:40:31 lccmay8 kernel: selinux_register_security:  Registering secondary module capability
Jan 20 13:40:11 lccmay8 sysctl: net.ipv4.ip_forward = 0 
Jan 20 13:40:31 lccmay8 kernel: Capability LSM initialized as secondary
Jan 20 13:40:11 lccmay8 sysctl: net.ipv4.conf.default.rp_filter = 1 
Jan 20 13:40:31 lccmay8 kernel: Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
Jan 20 13:40:11 lccmay8 sysctl: net.ipv4.conf.default.accept_source_route = 0 
Jan 20 13:40:31 lccmay8 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Jan 20 13:40:11 lccmay8 sysctl: kernel.sysrq = 0 
Jan 20 13:40:31 lccmay8 kernel: CPU: L2 cache: 4096K
Jan 20 13:40:11 lccmay8 sysctl: kernel.core_uses_pid = 1 
Jan 20 13:40:31 lccmay8 kernel: using mwait in idle threads.
Jan 20 13:40:11 lccmay8 rc.sysinit: Configuring kernel parameters:  succeeded 
Jan 20 13:40:31 lccmay8 kernel: CPU0: Physical Processor ID: 0
Jan 20 13:40:11 lccmay8 rc.sysinit: Loading default keymap succeeded 
Jan 20 13:40:31 lccmay8 kernel: CPU0: Processor Core ID: 0
Jan 20 13:40:12 lccmay8 rc.sysinit: Setting hostname lccmay8.jpn.hp.com:  succeeded 
Jan 20 13:40:31 lccmay8 kernel: CPU0: Initial APIC ID: 0
Jan 20 13:40:12 lccmay8 rc.sysinit: Checking root filesystem succeeded 
Jan 20 13:40:32 lccmay8 kernel: Using IO APIC NMI watchdog
Jan 20 13:40:12 lccmay8 rc.sysinit: Remounting root filesystem in read-write mode:  succeeded 
Jan 20 13:40:32 lccmay8 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Jan 20 13:40:12 lccmay8 lvm.static:   2 logical volume(s) in volume group VolGroup00 now active 
Jan 20 13:40:32 lccmay8 smartd[3410]: smartd version 5.33 [x86_64-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen 
Jan 20 13:40:32 lccmay8 kernel: CPU: L2 cache: 4096K
Jan 20 13:40:12 lccmay8 rc.sysinit: Setting up Logical Volume Management: succeeded 
Jan 20 13:40:32 lccmay8 smartd[3410]: Home page is http://smartmontools.sourceforge.net/  
Jan 20 13:40:32 lccmay8 kernel: CPU0: Physical Processor ID: 0
Jan 20 13:40:12 lccmay8 rc.sysinit: Checking filesystems succeeded 
Jan 20 13:40:32 lccmay8 smartd[3410]: Opened configuration file /etc/smartd.conf 
Jan 20 13:40:32 lccmay8 kernel: CPU0: Processor Core ID: 0
Jan 20 13:40:12 lccmay8 rc.sysinit: Mounting local filesystems:  succeeded 
Jan 20 13:40:32 lccmay8 smartd[3410]: Configuration file /etc/smartd.conf parsed but has no entries (like /dev/hda) 
Jan 20 13:40:32 lccmay8 kernel: CPU0: Initial APIC ID: 0
Jan 20 13:40:12 lccmay8 rc.sysinit: Enabling local filesystem quotas:  succeeded 
Jan 20 13:40:32 lccmay8 smartd[3410]: Unable to monitor any SMART enabled devices. Try debug (-d) option. Exiting... 
Jan 20 13:40:32 lccmay8 kernel: CPU0: Intel(R) Xeon(R) CPU           X3210  @ 2.13GHz stepping 0b
Jan 20 13:40:12 lccmay8 rc.sysinit: Enabling swap space:  succeeded 
Jan 20 13:40:32 lccmay8 smartd: smartd 起動 failed
Jan 20 13:40:33 lccmay8 kernel: per-CPU timeslice cutoff: 4095.75 usecs.
Jan 20 13:40:13 lccmay8 init: Entering runlevel: 5 
Jan 20 13:40:33 lccmay8 kernel: task migration cache decay timeout: 4 msecs.
Jan 20 13:40:33 lccmay8 acpid: acpid 起動 succeeded
Jan 20 13:40:13 lccmay8 microcode_ctl: microcode_ctl 起動 succeeded 
Jan 20 13:40:33 lccmay8 kernel: Booting processor 1/2 rip 6000 rsp 100d7e05f58
Jan 20 13:40:13 lccmay8 vgchange:   2 logical volume(s) in volume group "VolGroup00" monitored 
Jan 20 13:40:33 lccmay8 kernel: Initializing CPU#1
Jan 20 13:40:13 lccmay8 lvm2-monitor: Starting monitoring for VG VolGroup00: succeeded 
Jan 20 13:40:33 lccmay8 kernel: Calibrating delay using timer specific routine.. 4256.04 BogoMIPS (lpj=2128021)
Jan 20 13:40:13 lccmay8 readahead_early: readahead をバックグランドで起動中:  
Jan 20 13:40:33 lccmay8 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Jan 20 13:40:13 lccmay8 rc: readahead_early を起動中:  succeeded 
Jan 20 13:40:33 lccmay8 kernel: CPU: L2 cache: 4096K
Jan 20 13:40:23 lccmay8 kudzu:  succeeded 
Jan 20 13:40:34 lccmay8 kernel: CPU1: Physical Processor ID: 0
Jan 20 13:40:23 lccmay8 rc: openibd を起動中:  succeeded 
Jan 20 13:40:34 lccmay8 kernel: CPU1: Processor Core ID: 2
Jan 20 13:40:23 lccmay8 pcmcia: Starting PCMCIA services:  
Jan 20 13:40:34 lccmay8 kernel: CPU1: Initial APIC ID: 2
Jan 20 13:40:23 lccmay8 cardmgr[3042]: no sockets found! 
Jan 20 13:40:34 lccmay8 kernel: Intel(R) Xeon(R) CPU           X3210  @ 2.13GHz stepping 0b
Jan 20 13:40:23 lccmay8 pcmcia: cardmgr[3042]: no sockets found! 
Jan 20 13:40:34 lccmay8 kernel: Booting processor 2/1 rip 6000 rsp 100d7e3df58
Jan 20 13:40:23 lccmay8 pcmcia: done. 
Jan 20 13:40:34 lccmay8 kernel: Initializing CPU#2
Jan 20 13:40:23 lccmay8 rc: pcmcia を起動中:  succeeded 
Jan 20 13:40:34 lccmay8 kernel: Calibrating delay using timer specific routine.. 4255.98 BogoMIPS (lpj=2127990)
Jan 20 13:40:23 lccmay8 sysctl: net.ipv4.ip_forward = 0 
Jan 20 13:40:35 lccmay8 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Jan 20 13:40:23 lccmay8 sysctl: net.ipv4.conf.default.rp_filter = 1 
Jan 20 13:40:35 lccmay8 kernel: CPU: L2 cache: 4096K
Jan 20 13:40:23 lccmay8 sysctl: net.ipv4.conf.default.accept_source_route = 0 
Jan 20 13:40:35 lccmay8 cups: cupsd 起動 succeeded
Jan 20 13:40:35 lccmay8 kernel: CPU2: Physical Processor ID: 0
Jan 20 13:40:23 lccmay8 sysctl: kernel.sysrq = 0 
Jan 20 13:40:35 lccmay8 kernel: CPU2: Processor Core ID: 1
Jan 20 13:40:35 lccmay8 sshd: RSA1 キー生成 succeeded
Jan 20 13:40:23 lccmay8 sysctl: kernel.core_uses_pid = 1 
Jan 20 13:40:35 lccmay8 kernel: CPU2: Initial APIC ID: 1
Jan 20 13:40:23 lccmay8 network: ネットワークパラメーターを設定中:  succeeded 
Jan 20 13:40:35 lccmay8 kernel: Intel(R) Xeon(R) CPU           X3210  @ 2.13GHz stepping 0b
Jan 20 13:40:35 lccmay8 sshd: RSA キー生成 succeeded
Jan 20 13:40:23 lccmay8 network: ループバックインターフェイスを呼び込み中 succeeded 
Jan 20 13:40:35 lccmay8 kernel: Booting processor 3/3 rip 6000 rsp 10037e33f58
Jan 20 13:40:28 lccmay8 network: インターフェース eth0 を活性化中:  succeeded 
Jan 20 13:40:36 lccmay8 kernel: Initializing CPU#3
Jan 20 13:40:36 lccmay8 kernel: Calibrating delay using timer specific routine.. 4256.01 BogoMIPS (lpj=2128005)
Jan 20 13:40:36 lccmay8 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Jan 20 13:40:36 lccmay8 kernel: CPU: L2 cache: 4096K
Jan 20 13:40:36 lccmay8 sshd: DSA キー生成 succeeded
Jan 20 13:40:36 lccmay8 kernel: CPU3: Physical Processor ID: 0
Jan 20 13:40:36 lccmay8 kernel: CPU3: Processor Core ID: 3
Jan 20 13:40:36 lccmay8 sshd:  succeeded
Jan 20 13:40:36 lccmay8 kernel: CPU3: Initial APIC ID: 3
Jan 20 13:40:36 lccmay8 xinetd: xinetd 起動 succeeded
Jan 20 13:40:36 lccmay8 kernel: Intel(R) Xeon(R) CPU           X3210  @ 2.13GHz stepping 0b
Jan 20 13:40:36 lccmay8 kernel: Total of 4 processors activated (17027.19 BogoMIPS).
Jan 20 13:40:36 lccmay8 kernel: activating NMI Watchdog ... done.
Jan 20 13:40:37 lccmay8 kernel: testing NMI watchdog ... OK.
Jan 20 13:40:37 lccmay8 kernel: Using local APIC timer interrupts.
Jan 20 13:40:37 lccmay8 kernel: Detected 16.625 MHz APIC timer.
Jan 20 13:40:37 lccmay8 kernel: checking TSC synchronization across 4 CPUs: passed.
Jan 20 13:40:37 lccmay8 kernel: Brought up 4 CPUs
Jan 20 13:40:37 lccmay8 kernel: time.c: Using HPET/TSC based timekeeping.
Jan 20 13:40:37 lccmay8 kernel: checking if image is initramfs... it is
Jan 20 13:40:37 lccmay8 kernel: NET: Registered protocol family 16
Jan 20 13:40:37 lccmay8 kernel: PCI: Using configuration type 1
Jan 20 13:40:37 lccmay8 kernel: PCI: Using MMCONFIG at e0000000
Jan 20 13:40:37 lccmay8 kernel: mtrr: v2.0 (20020519)
Jan 20 13:40:37 lccmay8 sendmail: sendmail 起動 succeeded
Jan 20 13:40:37 lccmay8 kernel: ACPI: Subsystem revision 20040816
Jan 20 13:40:37 lccmay8 sendmail: sm-client 起動 succeeded
Jan 20 13:40:37 lccmay8 kernel: ACPI: Interpreter enabled
Jan 20 13:40:37 lccmay8 kernel: ACPI: Using IOAPIC for interrupt routing
Jan 20 13:40:37 lccmay8 gpm[3540]: *** info [startup.c(95)]: 
Jan 20 13:40:37 lccmay8 kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Jan 20 13:40:38 lccmay8 kernel: PCI: Probing PCI hardware (bus 00)
Jan 20 13:40:38 lccmay8 gpm[3540]: Started gpm successfully. Entered daemon mode.
Jan 20 13:40:38 lccmay8 kernel: PCI: Transparent bridge - 0000:00:1e.0
Jan 20 13:40:38 lccmay8 gpm[3540]: *** info [mice.c(1766)]: 
Jan 20 13:40:38 lccmay8 gpm[3540]: imps2: Auto-detected intellimouse PS/2
Jan 20 13:40:38 lccmay8 gpm: gpm 起動 succeeded
Jan 20 13:40:38 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11)
Jan 20 13:40:38 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 *10 11)
Jan 20 13:40:38 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled.
Jan 20 13:40:38 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled.
Jan 20 13:40:38 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *7 10 11)
Jan 20 13:40:38 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11)
Jan 20 13:40:38 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11)
Jan 20 13:40:38 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 *11)
Jan 20 13:40:38 lccmay8 kernel: usbcore: registered new driver usbfs
Jan 20 13:40:38 lccmay8 iiim: htt 起動 succeeded
Jan 20 13:40:38 lccmay8 kernel: usbcore: registered new driver hub
Jan 20 13:40:38 lccmay8 kernel: PCI: Using ACPI for IRQ routing
Jan 20 13:40:38 lccmay8 kernel: GSI 16 sharing vector 0xA9 and IRQ 16
Jan 20 13:40:38 lccmay8 xinetd[3501]: xinetd Version 2.3.13 started with libwrap loadavg options compiled in.
Jan 20 13:40:38 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
Jan 20 13:40:38 lccmay8 xinetd[3501]: Started working: 0 available services
Jan 20 13:40:39 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169
Jan 20 13:40:39 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
Jan 20 13:40:39 lccmay8 kernel: GSI 17 sharing vector 0xB1 and IRQ 17
Jan 20 13:40:39 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 177
Jan 20 13:40:39 lccmay8 kernel: GSI 18 sharing vector 0xB9 and IRQ 18
Jan 20 13:40:39 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 185
Jan 20 13:40:39 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169
Jan 20 13:40:39 lccmay8 kernel: GSI 19 sharing vector 0xC1 and IRQ 19
Jan 20 13:40:39 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 193
Jan 20 13:40:39 lccmay8 kernel: GSI 20 sharing vector 0xC9 and IRQ 20
Jan 20 13:40:39 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 201
Jan 20 13:40:39 lccmay8 htt_server[3572]: started.
Jan 20 13:40:39 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 201
Jan 20 13:40:39 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 201
Jan 20 13:40:39 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 21 (level, low) -> IRQ 201
Jan 20 13:40:39 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 201
Jan 20 13:40:39 lccmay8 kernel: GSI 21 sharing vector 0xD1 and IRQ 21
Jan 20 13:40:39 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 20 (level, low) -> IRQ 209
Jan 20 13:40:39 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 20 (level, low) -> IRQ 209
Jan 20 13:40:39 lccmay8 kernel: ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 169
Jan 20 13:40:39 lccmay8 kernel: ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 16 (level, low) -> IRQ 169
Jan 20 13:40:39 lccmay8 kernel: ACPI: PCI Interrupt 0000:03:04.1[B] -> GSI 17 (level, low) -> IRQ 193
Jan 20 13:40:39 lccmay8 kernel: ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 21 (level, low) -> IRQ 201
Jan 20 13:40:39 lccmay8 kernel: GSI 22 sharing vector 0xD9 and IRQ 22
Jan 20 13:40:40 lccmay8 kernel: ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 22 (level, low) -> IRQ 217
Jan 20 13:40:40 lccmay8 kernel: GSI 23 sharing vector 0xE1 and IRQ 23
Jan 20 13:40:40 lccmay8 kernel: ACPI: PCI Interrupt 0000:01:04.2[B] -> GSI 23 (level, low) -> IRQ 225
Jan 20 13:40:40 lccmay8 kernel: ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 23 (level, low) -> IRQ 225
Jan 20 13:40:40 lccmay8 kernel: ACPI: PCI Interrupt 0000:01:04.6[A] -> GSI 22 (level, low) -> IRQ 217
Jan 20 13:40:40 lccmay8 kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Jan 20 13:40:40 lccmay8 kernel: IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Jan 20 13:40:40 lccmay8 kernel: audit: initializing netlink socket (disabled)
Jan 20 13:40:40 lccmay8 kernel: audit(1232458790.589:1): initialized
Jan 20 13:40:40 lccmay8 kernel: Total HugeTLB memory allocated, 0
Jan 20 13:40:40 lccmay8 kernel: VFS: Disk quotas dquot_6.5.1
Jan 20 13:40:40 lccmay8 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jan 20 13:40:40 lccmay8 kernel: Initializing Cryptographic API
Jan 20 13:40:40 lccmay8 kernel: ksign: Installing public key data
Jan 20 13:40:40 lccmay8 kernel: Loading keyring
Jan 20 13:40:40 lccmay8 kernel: - Added public key 841309068087E909
Jan 20 13:40:40 lccmay8 kernel: - User ID: CentOS (Kernel Module GPG key)
Jan 20 13:40:40 lccmay8 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jan 20 13:40:40 lccmay8 kernel: ACPI: Processor [CPU0] (supports C1)
Jan 20 13:40:41 lccmay8 kernel: ACPI: Processor [CPU1] (supports C1)
Jan 20 13:40:41 lccmay8 kernel: ACPI: Processor [CPU2] (supports C1)
Jan 20 13:40:41 lccmay8 canna:  succeeded
Jan 20 13:40:41 lccmay8 kernel: ACPI: Processor [CPU3] (supports C1)
Jan 20 13:40:41 lccmay8 crond: crond 起動 succeeded
Jan 20 13:40:41 lccmay8 kernel: ACPI: Thermal Zone [THM0] (8 C)
Jan 20 13:40:41 lccmay8 kernel: Real Time Clock Driver v1.12
Jan 20 13:40:41 lccmay8 kernel: Linux agpgart interface v0.100 (c) Dave Jones
Jan 20 13:40:41 lccmay8 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jan 20 13:40:41 lccmay8 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 20 13:40:41 lccmay8 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled
Jan 20 13:40:41 lccmay8 kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jan 20 13:40:41 lccmay8 kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jan 20 13:40:41 lccmay8 kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Jan 20 13:40:41 lccmay8 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jan 20 13:40:41 lccmay8 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan 20 13:40:41 lccmay8 kernel: ide-floppy driver 0.99.newide
Jan 20 13:40:41 lccmay8 kernel: usbcore: registered new driver hiddev
Jan 20 13:40:42 lccmay8 kernel: usbcore: registered new driver usbhid
Jan 20 13:40:42 lccmay8 kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Jan 20 13:40:42 lccmay8 kernel: mice: PS/2 mouse device common for all mice
Jan 20 13:40:42 lccmay8 kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Jan 20 13:40:42 lccmay8 kernel: input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
Jan 20 13:40:42 lccmay8 kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Jan 20 13:40:42 lccmay8 kernel: NET: Registered protocol family 2
Jan 20 13:40:42 lccmay8 kernel: IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
Jan 20 13:40:42 lccmay8 kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Jan 20 13:40:42 lccmay8 kernel: TCP bind hash table entries: 262144 (order: 10, 4194304 bytes)
Jan 20 13:40:42 lccmay8 kernel: TCP: Hash tables configured (established 262144 bind 262144)
Jan 20 13:40:42 lccmay8 kernel: Initializing IPsec netlink socket
Jan 20 13:40:42 lccmay8 kernel: NET: Registered protocol family 1
Jan 20 13:40:42 lccmay8 kernel: NET: Registered protocol family 17
Jan 20 13:40:42 lccmay8 kernel: ACPI wakeup devices: 
Jan 20 13:40:42 lccmay8 kernel: 
Jan 20 13:40:42 lccmay8 kernel: ACPI: (supports S0 S4 S5)
Jan 20 13:40:42 lccmay8 kernel: Freeing unused kernel memory: 212k freed
Jan 20 13:40:42 lccmay8 kernel: SCSI subsystem initialized
Jan 20 13:40:42 lccmay8 kernel: HP CISS Driver (v 2.6.16.RH1)
Jan 20 13:40:42 lccmay8 kernel: ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 169
Jan 20 13:40:42 lccmay8 kernel: MSI INIT SUCCESS
Jan 20 13:40:42 lccmay8 kernel: cciss: using DAC cycles
Jan 20 13:40:42 lccmay8 kernel:       blocks= 20481599 block_size= 512
Jan 20 13:40:42 lccmay8 kernel:       heads= 255, sectors= 32, cylinders= 2510
Jan 20 13:40:42 lccmay8 kernel: 
Jan 20 13:40:42 lccmay8 kernel: Using cfq io scheduler
Jan 20 13:40:42 lccmay8 kernel:       blocks= 20481599 block_size= 512
Jan 20 13:40:42 lccmay8 kernel:       heads= 255, sectors= 32, cylinders= 2510
Jan 20 13:40:42 lccmay8 kernel: 
Jan 20 13:40:42 lccmay8 kernel:  cciss/c0d0: p1 p2
Jan 20 13:40:42 lccmay8 kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Jan 20 13:40:42 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 20 (level, low) -> IRQ 209
Jan 20 13:40:43 lccmay8 kernel: ata1: SATA max UDMA/133 cmd 0x1080 ctl 0x108A bmdma 0x10A0 irq 209
Jan 20 13:40:43 lccmay8 kernel: ata2: SATA max UDMA/133 cmd 0x1090 ctl 0x109A bmdma 0x10A8 irq 209
Jan 20 13:40:43 lccmay8 kernel: scsi0 : ata_piix
Jan 20 13:40:43 lccmay8 kernel: scsi1 : ata_piix
Jan 20 13:40:43 lccmay8 kernel: ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
Jan 20 13:40:43 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 20 (level, low) -> IRQ 209
Jan 20 13:40:43 lccmay8 kernel: ata3: SATA max UDMA/133 cmd 0x10C0 ctl 0x10CA bmdma 0x10E0 irq 209
Jan 20 13:40:43 lccmay8 kernel: ata4: SATA max UDMA/133 cmd 0x10D0 ctl 0x10DA bmdma 0x10E8 irq 209
Jan 20 13:40:43 lccmay8 kernel: scsi2 : ata_piix
Jan 20 13:40:43 lccmay8 kernel: ata3.00: ATAPI, max UDMA/33
Jan 20 13:40:43 lccmay8 kernel: ata3.00: applying bridge limits
Jan 20 13:40:43 lccmay8 kernel: ata3.00: configured for UDMA/33
Jan 20 13:40:43 lccmay8 kernel: scsi3 : ata_piix
Jan 20 13:40:43 lccmay8 kernel:   Vendor: HL-DT-ST  Model: RW/DVD GCC-M10N   Rev: 2.02
Jan 20 13:40:43 lccmay8 kernel:   Type:   CD-ROM                             ANSI SCSI revision: 05
Jan 20 13:40:43 lccmay8 kernel: device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com
Jan 20 13:40:43 lccmay8 kernel: kjournald starting.  Commit interval 5 seconds
Jan 20 13:40:43 lccmay8 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 20 13:40:43 lccmay8 kernel: SELinux:  Disabled at runtime.
Jan 20 13:40:43 lccmay8 kernel: sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Jan 20 13:40:43 lccmay8 kernel: Uniform CD-ROM driver Revision: 3.20
Jan 20 13:40:43 lccmay8 xfs: xfs 起動 succeeded
Jan 20 13:40:43 lccmay8 kernel: inserting floppy driver for 2.6.9-67.ELsmp
Jan 20 13:40:43 lccmay8 kernel: Floppy drive(s): fd0 is 1.44M
Jan 20 13:40:43 lccmay8 anacron: anacron 起動 succeeded
Jan 20 13:40:43 lccmay8 kernel: floppy0: no floppy controllers found
Jan 20 13:40:44 lccmay8 kernel: tg3.c:v3.77 (May 31, 2007)
Jan 20 13:40:44 lccmay8 atd: atd 起動 succeeded
Jan 20 13:40:44 lccmay8 kernel: ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 16 (level, low) -> IRQ 169
Jan 20 13:40:44 lccmay8 kernel: eth0: Tigon3 [partno(N/A) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:1f:29:bd:58:5c
Jan 20 13:40:44 lccmay8 kernel: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1]
Jan 20 13:40:44 lccmay8 kernel: eth0: dma_rwctrl[76148000] dma_mask[40-bit]
Jan 20 13:40:44 lccmay8 kernel: ACPI: PCI Interrupt 0000:03:04.1[B] -> GSI 17 (level, low) -> IRQ 193
Jan 20 13:40:44 lccmay8 kernel: eth1: Tigon3 [partno(N/A) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:1f:29:bd:58:5d
Jan 20 13:40:44 lccmay8 kernel: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
Jan 20 13:40:44 lccmay8 kernel: eth1: dma_rwctrl[76148000] dma_mask[40-bit]
Jan 20 13:40:44 lccmay8 kernel: hw_random: cannot enable RNG, aborting
Jan 20 13:40:44 lccmay8 kernel: USB Universal Host Controller Interface driver v2.2
Jan 20 13:40:44 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 201
Jan 20 13:40:44 lccmay8 kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jan 20 13:40:44 lccmay8 kernel: uhci_hcd 0000:00:1d.0: irq 201, io base 0000000000001000
Jan 20 13:40:44 lccmay8 kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Jan 20 13:40:44 lccmay8 kernel: hub 1-0:1.0: USB hub found
Jan 20 13:40:44 lccmay8 kernel: hub 1-0:1.0: 2 ports detected
Jan 20 13:40:44 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 201
Jan 20 13:40:44 lccmay8 kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jan 20 13:40:45 lccmay8 kernel: uhci_hcd 0000:00:1d.1: irq 201, io base 0000000000001020
Jan 20 13:40:45 lccmay8 kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Jan 20 13:40:45 lccmay8 kernel: hub 2-0:1.0: USB hub found
Jan 20 13:40:45 lccmay8 kernel: hub 2-0:1.0: 2 ports detected
Jan 20 13:40:45 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 201
Jan 20 13:40:45 lccmay8 kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jan 20 13:40:45 lccmay8 kernel: uhci_hcd 0000:00:1d.2: irq 201, io base 0000000000001040
Jan 20 13:40:45 lccmay8 kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Jan 20 13:40:45 lccmay8 kernel: hub 3-0:1.0: USB hub found
Jan 20 13:40:45 lccmay8 kernel: hub 3-0:1.0: 2 ports detected
Jan 20 13:40:45 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 21 (level, low) -> IRQ 201
Jan 20 13:40:45 lccmay8 kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
Jan 20 13:40:45 lccmay8 kernel: uhci_hcd 0000:00:1d.3: irq 201, io base 0000000000001060
Jan 20 13:40:45 lccmay8 kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Jan 20 13:40:45 lccmay8 kernel: hub 4-0:1.0: USB hub found
Jan 20 13:40:45 lccmay8 kernel: hub 4-0:1.0: 2 ports detected
Jan 20 13:40:45 lccmay8 kernel: ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 23 (level, low) -> IRQ 225
Jan 20 13:40:45 lccmay8 kernel: uhci_hcd 0000:01:04.4: UHCI Host Controller
Jan 20 13:40:45 lccmay8 kernel: uhci_hcd 0000:01:04.4: irq 225, io base 0000000000003800
Jan 20 13:40:45 lccmay8 kernel: uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 5
Jan 20 13:40:45 lccmay8 kernel: uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
Jan 20 13:40:45 lccmay8 kernel: hub 5-0:1.0: USB hub found
Jan 20 13:40:45 lccmay8 kernel: hub 5-0:1.0: 2 ports detected
Jan 20 13:40:45 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 201
Jan 20 13:40:45 lccmay8 kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Jan 20 13:40:45 lccmay8 kernel: ehci_hcd 0000:00:1d.7: irq 201, pci mem ffffff000001a000
Jan 20 13:40:45 lccmay8 kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6
Jan 20 13:40:46 lccmay8 kernel: ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
Jan 20 13:40:46 lccmay8 kernel: hub 6-0:1.0: USB hub found
Jan 20 13:40:46 lccmay8 kernel: hub 6-0:1.0: 8 ports detected
Jan 20 13:40:47 lccmay8 kernel: md: Autodetecting RAID arrays.
Jan 20 13:40:47 lccmay8 kernel: md: autorun ...
Jan 20 13:40:47 lccmay8 gconfd (root-3679): 起動中 (バージョン 2.8.1), PID 3679 ユーザ 'root'
Jan 20 13:40:47 lccmay8 kernel: md: ... autorun DONE.
Jan 20 13:40:47 lccmay8 kernel: usb 5-1: new full speed USB device using address 2
Jan 20 13:40:47 lccmay8 kernel: input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1
Jan 20 13:40:47 lccmay8 kernel: input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1
Jan 20 13:40:47 lccmay8 gconfd (root-3679): 読み込み専用の設定ソースに対するアドレス "xml:readonly:/etc/gconf/gconf.xml.mandatory" (0 行目) を解決しました
Jan 20 13:40:47 lccmay8 kernel: usb 5-2: new full speed USB device using address 3
Jan 20 13:40:47 lccmay8 gconfd (root-3679): 書き込み可能な設定ソースに対するアドレス "xml:readwrite:/root/.gconf" (1 行目) を解決しました
Jan 20 13:40:47 lccmay8 kernel: hub 5-2:1.0: USB hub found
Jan 20 13:40:47 lccmay8 gconfd (root-3679): 読み込み専用の設定ソースに対するアドレス "xml:readonly:/etc/gconf/gconf.xml.defaults" (2 行目) を解決しました
Jan 20 13:40:47 lccmay8 kernel: hub 5-2:1.0: 7 ports detected
Jan 20 13:40:48 lccmay8 kernel: NET: Registered protocol family 10
Jan 20 13:40:48 lccmay8 kernel: Disabled Privacy Extensions on device ffffffff8040d1a0(lo)
Jan 20 13:40:48 lccmay8 kernel: IPv6 over IPv4 tunneling driver
Jan 20 13:40:48 lccmay8 kernel: mtrr: type mismatch for d8000000,2000000 old: uncachable new: write-combining
Jan 20 13:40:48 lccmay8 kernel: ACPI: Power Button (FF) [PWRF]
Jan 20 13:40:48 lccmay8 kernel: EXT3 FS on dm-0, internal journal
Jan 20 13:40:48 lccmay8 kernel: loop: loaded (max 8 devices)
Jan 20 13:40:48 lccmay8 kernel: kjournald starting.  Commit interval 5 seconds
Jan 20 13:40:48 lccmay8 kernel: EXT3 FS on cciss/c0d0p1, internal journal
Jan 20 13:40:48 lccmay8 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 20 13:40:48 lccmay8 kernel: Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1
Jan 20 13:40:48 lccmay8 kernel: IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
Jan 20 13:40:48 lccmay8 kernel: microcode: No new microdata for cpu 2
Jan 20 13:40:48 lccmay8 kernel: microcode: No new microdata for cpu 3
Jan 20 13:40:48 lccmay8 kernel: microcode: No new microdata for cpu 1
Jan 20 13:40:48 lccmay8 kernel: microcode: No new microdata for cpu 0
Jan 20 13:40:48 lccmay8 kernel: IA-32 Microcode Update Driver v1.14 unregistered
Jan 20 13:40:49 lccmay8 kernel: Linux Kernel Card Services
Jan 20 13:40:49 lccmay8 kernel:   options:  [pci] [cardbus] [pm]
Jan 20 13:40:49 lccmay8 kernel: ip_tables: (C) 2000-2002 Netfilter core team
Jan 20 13:40:49 lccmay8 kernel: ip_tables: (C) 2000-2002 Netfilter core team
Jan 20 13:40:49 lccmay8 kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 20 13:40:49 lccmay8 kernel: tg3: eth0: Link is up at 100 Mbps, full duplex.
Jan 20 13:40:49 lccmay8 kernel: tg3: eth0: Flow control is off for TX and off for RX.
Jan 20 13:40:49 lccmay8 kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jan 20 13:40:49 lccmay8 kernel: lp: driver loaded but no devices found
Jan 20 13:41:33 lccmay8 firstboot:  succeeded
Jan 20 13:41:33 lccmay8 readahead: readahead をバックグランドで起動中: 
Jan 20 13:41:33 lccmay8 rc: readahead を起動中:  succeeded
Jan 20 13:41:34 lccmay8 messagebus: messagebus 起動 succeeded
Jan 20 13:41:34 lccmay8 cups-config-daemon: cups-config-daemon 起動 succeeded
Jan 20 13:41:34 lccmay8 haldaemon: haldaemon 起動 succeeded
Jan 20 13:41:34 lccmay8 fstab-sync[3784]: removed all generated mount points
Jan 20 13:41:34 lccmay8 fstab-sync[4545]: added mount point /media/cdrecorder for /dev/scd0
Jan 20 13:41:35 lccmay8 kernel: mtrr: type mismatch for d8000000,2000000 old: uncachable new: write-combining
Jan 20 13:41:48 lccmay8 gconfd (root-3679): GConf サーバが使用されていません。シャットダウンします。
Jan 20 13:41:48 lccmay8 gconfd (root-3679): 終了します。
Jan 20 13:42:30 lccmay8 gdm(pam_unix)[4525]: session opened for user root by (uid=0)
Jan 20 13:42:30 lccmay8 gconfd (root-4867): 起動中 (バージョン 2.8.1), PID 4867 ユーザ 'root'
Jan 20 13:42:30 lccmay8 gconfd (root-4867): 読み込み専用の設定ソースに対するアドレス "xml:readonly:/etc/gconf/gconf.xml.mandatory" (0 行目) を解決しました
Jan 20 13:42:30 lccmay8 gconfd (root-4867): 書き込み可能な設定ソースに対するアドレス "xml:readwrite:/root/.gconf" (1 行目) を解決しました
Jan 20 13:42:30 lccmay8 gconfd (root-4867): 読み込み専用の設定ソースに対するアドレス "xml:readonly:/etc/gconf/gconf.xml.defaults" (2 行目) を解決しました
Jan 20 13:42:32 lccmay8 htt_server[3572]: Client shut down the connection owned by im_id(1).
Jan 20 13:42:33 lccmay8 gconfd (root-4867): 書き込み可能な設定ソースに対するアドレス "xml:readwrite:/root/.gconf" (0 行目) を解決しました