Jan 20 10:27:03 lccmay6 syslogd 1.4.1: restart.
Jan 20 10:27:03 lccmay6 syslog: syslogd 起動 succeeded
Jan 20 10:27:03 lccmay6 kernel: klogd 1.4.1, log source = /proc/kmsg started.
Jan 20 10:27:03 lccmay6 kernel: Bootdata ok (command line is ro root=LABEL=/ rhgb quiet)
Jan 20 10:27:03 lccmay6 kernel: Linux version 2.6.9-67.EL (mockbuild@builder10.centos.org) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-9)) #1 Fri Nov 16 12:34:11 EST 2007
Jan 20 10:27:03 lccmay6 kernel: BIOS-provided physical RAM map:
Jan 20 10:27:03 lccmay6 kernel:  BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
Jan 20 10:27:03 lccmay6 kernel:  BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
Jan 20 10:27:03 lccmay6 kernel:  BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
Jan 20 10:27:03 lccmay6 kernel:  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Jan 20 10:27:03 lccmay6 kernel:  BIOS-e820: 0000000000100000 - 000000007fea0000 (usable)
Jan 20 10:27:03 lccmay6 kernel:  BIOS-e820: 000000007fea0000 - 000000007feac000 (ACPI data)
Jan 20 10:27:03 lccmay6 kernel:  BIOS-e820: 000000007feac000 - 000000007fead000 (ACPI NVS)
Jan 20 10:27:03 lccmay6 kernel:  BIOS-e820: 000000007fead000 - 0000000080000000 (reserved)
Jan 20 10:27:03 lccmay6 syslog: klogd 起動 succeeded
Jan 20 10:27:03 lccmay6 kernel:  BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
Jan 20 10:27:03 lccmay6 kernel:  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Jan 20 10:27:03 lccmay6 kernel:  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Jan 20 10:27:03 lccmay6 kernel:  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Jan 20 10:27:03 lccmay6 kernel: DMI present.
Jan 20 10:27:03 lccmay6 kernel: ACPI: PM-Timer IO Port: 0x1008
Jan 20 10:27:03 lccmay6 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Jan 20 10:27:03 lccmay6 kernel: Processor #0 6:6 APIC version 16
Jan 20 10:27:03 lccmay6 kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Jan 20 10:27:03 lccmay6 kernel: Setting APIC routing to flat
Jan 20 10:27:03 lccmay6 kernel: ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Jan 20 10:27:03 lccmay6 kernel: IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Jan 20 10:27:03 lccmay6 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
Jan 20 10:27:03 lccmay6 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jan 20 10:27:03 lccmay6 kernel: Using ACPI (MADT) for SMP configuration information
Jan 20 10:27:03 lccmay6 kernel: Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
Jan 20 10:27:04 lccmay6 kernel: Checking aperture...
Jan 20 10:27:04 lccmay6 kernel: Built 1 zonelists
Jan 20 10:27:04 lccmay6 kernel: Kernel command line: ro root=LABEL=/ rhgb quiet console=tty0
Jan 20 10:27:04 lccmay6 kernel: Initializing CPU#0
Jan 20 10:27:04 lccmay6 irqbalance: Can't balance irqs on a uniprocessor system:  failed
Jan 20 10:27:04 lccmay6 kernel: PID hash table entries: 4096 (order: 12, 131072 bytes)
Jan 20 10:27:04 lccmay6 kernel: time.c: Using 3.579545 MHz PM timer.
Jan 20 10:27:04 lccmay6 kernel: time.c: Detected 1600.052 MHz processor.
Jan 20 10:27:04 lccmay6 kernel: time.c: Using PIT/TSC based timekeeping.
Jan 20 10:27:04 lccmay6 kernel: Console: colour VGA+ 80x25
Jan 20 10:27:04 lccmay6 kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Jan 20 10:27:04 lccmay6 kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Jan 20 10:27:04 lccmay6 kernel: Memory: 2057276k/2095744k available (2450k kernel code, 37724k reserved, 1339k data, 180k init)
Jan 20 10:27:04 lccmay6 kernel: Calibrating delay using timer specific routine.. 3203.83 BogoMIPS (lpj=1601917)
Jan 20 10:27:04 lccmay6 kernel: Security Scaffold v1.0.0 initialized
Jan 20 10:27:04 lccmay6 kernel: SELinux:  Initializing.
Jan 20 10:27:04 lccmay6 kernel: There is already a security framework initialized, register_security failed.
Jan 20 10:27:04 lccmay6 kernel: selinux_register_security:  Registering secondary module capability
Jan 20 10:27:04 lccmay6 kernel: Capability LSM initialized as secondary
Jan 20 10:27:04 lccmay6 kernel: Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
Jan 20 10:27:04 lccmay6 portmap: portmap 起動 succeeded
Jan 20 10:27:04 lccmay6 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Jan 20 10:27:04 lccmay6 kernel: CPU: L2 cache: 512K
Jan 20 10:27:04 lccmay6 kernel: using mwait in idle threads.
Jan 20 10:27:04 lccmay6 kernel: CPU: Intel(R) Celeron(R) CPU          420  @ 1.60GHz stepping 01
Jan 20 10:27:04 lccmay6 kernel: ACPI: System reset via FADT Reset Register is supported
Jan 20 10:27:04 lccmay6 kernel: Using IO APIC NMI watchdog
Jan 20 10:27:04 lccmay6 kernel: activating NMI Watchdog ... done.
Jan 20 10:27:04 lccmay6 kernel: testing NMI watchdog ... OK.
Jan 20 10:27:04 lccmay6 kernel: Using local APIC timer interrupts.
Jan 20 10:27:04 lccmay6 kernel: Detected 12.500 MHz APIC timer.
Jan 20 10:27:04 lccmay6 kernel: checking if image is initramfs... it is
Jan 20 10:27:04 lccmay6 kernel: NET: Registered protocol family 16
Jan 20 10:27:04 lccmay6 kernel: PCI: Using configuration type 1
Jan 20 10:27:04 lccmay6 kernel: PCI: Using MMCONFIG at f0000000
Jan 20 10:27:04 lccmay6 kernel: mtrr: v2.0 (20020519)
Jan 20 10:27:04 lccmay6 kernel: ACPI: Subsystem revision 20040816
Jan 20 10:27:04 lccmay6 kernel: ACPI: Interpreter enabled
Jan 20 10:27:04 lccmay6 kernel: ACPI: Using IOAPIC for interrupt routing
Jan 20 10:27:04 lccmay6 kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Jan 20 10:27:04 lccmay6 rpc.statd[3167]: Version 1.0.6 Starting
Jan 20 10:27:04 lccmay6 kernel: PCI: Probing PCI hardware (bus 00)
Jan 20 10:27:04 lccmay6 kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
Jan 20 10:27:04 lccmay6 kernel: PCI: Transparent bridge - 0000:00:1e.0
Jan 20 10:27:04 lccmay6 nfslock: rpc.statd 起動 succeeded
Jan 20 10:27:04 lccmay6 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Jan 20 10:27:04 lccmay6 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Jan 20 10:27:04 lccmay6 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
Jan 20 10:27:04 lccmay6 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 20 10:27:04 lccmay6 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 20 10:27:04 lccmay6 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 20 10:27:04 lccmay6 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 20 10:27:04 lccmay6 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 20 10:27:04 lccmay6 kernel: usbcore: registered new driver usbfs
Jan 20 10:27:04 lccmay6 kernel: usbcore: registered new driver hub
Jan 20 10:27:04 lccmay6 kernel: PCI: Using ACPI for IRQ routing
Jan 20 10:27:04 lccmay6 kernel: GSI 16 sharing vector 0xA9 and IRQ 16
Jan 20 10:27:04 lccmay6 kernel: ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
Jan 20 10:27:04 lccmay6 kernel: ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 169
Jan 20 10:27:04 lccmay6 kernel: GSI 17 sharing vector 0xB1 and IRQ 17
Jan 20 10:27:04 lccmay6 kernel: ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 177
Jan 20 10:27:04 lccmay6 kernel: GSI 18 sharing vector 0xB9 and IRQ 18
Jan 20 10:27:04 lccmay6 kernel: ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 185
Jan 20 10:27:04 lccmay6 kernel: ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 185
Jan 20 10:27:04 lccmay6 kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
Jan 20 10:27:04 lccmay6 kernel: ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169
Jan 20 10:27:04 lccmay6 kernel: ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 177
Jan 20 10:27:04 lccmay6 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
Jan 20 10:27:04 lccmay6 kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 177
Jan 20 10:27:04 lccmay6 kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
Jan 20 10:27:04 lccmay6 kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 169
Jan 20 10:27:04 lccmay6 kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 177
Jan 20 10:27:04 lccmay6 kernel: ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 177
Jan 20 10:27:04 lccmay6 kernel: ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 18 (level, low) -> IRQ 185
Jan 20 10:27:04 lccmay6 kernel: ACPI: PCI Interrupt 0000:0d:00.0[A] -> GSI 16 (level, low) -> IRQ 169
Jan 20 10:27:04 lccmay6 kernel: ACPI: PCI Interrupt 0000:0e:00.0[A] -> GSI 17 (level, low) -> IRQ 177
Jan 20 10:27:04 lccmay6 kernel: PCI-DMA: Disabling IOMMU.
Jan 20 10:27:05 lccmay6 kernel: Simple Boot Flag at 0x44 set to 0x80
Jan 20 10:27:05 lccmay6 kernel: IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Jan 20 10:27:05 lccmay6 kernel: audit: initializing netlink socket (disabled)
Jan 20 10:27:05 lccmay6 kernel: audit(1232447146.357:1): initialized
Jan 20 10:27:05 lccmay6 kernel: Total HugeTLB memory allocated, 0
Jan 20 10:27:05 lccmay6 kernel: VFS: Disk quotas dquot_6.5.1
Jan 20 10:27:05 lccmay6 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jan 20 10:27:05 lccmay6 kernel: Initializing Cryptographic API
Jan 20 10:27:05 lccmay6 kernel: ksign: Installing public key data
Jan 20 10:27:05 lccmay6 kernel: Loading keyring
Jan 20 10:27:05 lccmay6 kernel: - Added public key 841309068087E909
Jan 20 10:27:05 lccmay6 kernel: - User ID: CentOS (Kernel Module GPG key)
Jan 20 10:27:05 lccmay6 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jan 20 10:27:05 lccmay6 kernel: ACPI: Processor [CPU0] (supports C1)
Jan 20 10:27:05 lccmay6 kernel: Real Time Clock Driver v1.12
Jan 20 10:27:05 lccmay6 kernel: Linux agpgart interface v0.100 (c) Dave Jones
Jan 20 10:27:05 lccmay6 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jan 20 10:27:05 lccmay6 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 20 10:27:05 lccmay6 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled
Jan 20 10:27:05 lccmay6 kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jan 20 10:27:05 lccmay6 kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Jan 20 10:27:05 lccmay6 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jan 20 10:27:05 lccmay6 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan 20 10:27:05 lccmay6 kernel: hda: GB0250EAFJF, ATA DISK drive
Jan 20 10:27:05 lccmay6 kernel: hdc: GB0250EAFJF, ATA DISK drive
Jan 20 10:27:05 lccmay6 kernel: Using cfq io scheduler
Jan 20 10:27:05 lccmay6 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jan 20 10:27:05 lccmay6 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Jan 20 10:27:05 lccmay6 kernel: hda: max request size: 1024KiB
Jan 20 10:27:05 lccmay6 kernel: hda: 488397168 sectors (250059 MB), CHS=30401/255/63
Jan 20 10:27:05 lccmay6 kernel:  hda: hda1 hda2 hda3
Jan 20 10:27:05 lccmay6 kernel: hdc: max request size: 1024KiB
Jan 20 10:27:05 lccmay6 kernel: hdc: 488397168 sectors (250059 MB), CHS=30401/255/63
Jan 20 10:27:05 lccmay6 kernel:  hdc: hdc1
Jan 20 10:27:05 lccmay6 kernel: ide-floppy driver 0.99.newide
Jan 20 10:27:05 lccmay6 kernel: usbcore: registered new driver hiddev
Jan 20 10:27:05 lccmay6 kernel: usbcore: registered new driver usbhid
Jan 20 10:27:05 lccmay6 kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Jan 20 10:27:05 lccmay6 kernel: mice: PS/2 mouse device common for all mice
Jan 20 10:27:05 lccmay6 kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Jan 20 10:27:05 lccmay6 kernel: input: PS/2 Generic Mouse on isa0060/serio1
Jan 20 10:27:05 lccmay6 kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Jan 20 10:27:05 lccmay6 kernel: NET: Registered protocol family 2
Jan 20 10:27:05 lccmay6 kernel: IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
Jan 20 10:27:05 lccmay6 kernel: TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
Jan 20 10:27:05 lccmay6 kernel: TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
Jan 20 10:27:05 lccmay6 kernel: TCP: Hash tables configured (established 262144 bind 65536)
Jan 20 10:27:05 lccmay6 kernel: Initializing IPsec netlink socket
Jan 20 10:27:05 lccmay6 kernel: NET: Registered protocol family 1
Jan 20 10:27:05 lccmay6 kernel: NET: Registered protocol family 17
Jan 20 10:27:05 lccmay6 kernel: ACPI wakeup devices: 
Jan 20 10:27:05 lccmay6 kernel: USB4 USB5 USB7 ESB2 EXP1 EXP2 EXP3 EXP4 EXP5 EXP6 USB1 USB2 USB3 USB6 ESB1 PCIB PWRB 
Jan 20 10:27:05 lccmay6 kernel: ACPI: (supports S0 S1 S4 S5)
Jan 20 10:27:05 lccmay6 kernel: Freeing unused kernel memory: 180k freed
Jan 20 10:27:05 lccmay6 kernel: SCSI subsystem initialized
Jan 20 10:27:06 lccmay6 kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Jan 20 10:27:06 lccmay6 kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 177
Jan 20 10:27:06 lccmay6 kernel: ata: 0x1F0 IDE port busy
Jan 20 10:27:06 lccmay6 kernel: ata: conflict with ide0
Jan 20 10:27:06 lccmay6 kernel: ata: 0x170 IDE port busy
Jan 20 19:25:55 lccmay6 rc.sysinit: -e 
Jan 20 10:27:06 lccmay6 kernel: ata: conflict with ide1
Jan 20 10:25:57 lccmay6 date: 2009年  1月 20日 火曜日 10:25:57 JST 
Jan 20 10:27:06 lccmay6 kernel: ata_piix: probe of 0000:00:1f.2 failed with error -16
Jan 20 10:25:57 lccmay6 rc.sysinit: Setting clock  (localtime): 2009年  1月 20日 火曜日 10:25:57 JST succeeded 
Jan 20 10:27:06 lccmay6 kernel: ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
Jan 20 10:27:06 lccmay6 rpcidmapd: rpc.idmapd 起動 succeeded
Jan 20 10:25:57 lccmay6 udevsend[1185]: starting udevd daemon 
Jan 20 10:27:06 lccmay6 kernel: ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 18 (level, low) -> IRQ 185
Jan 20 10:25:57 lccmay6 scsi.agent[1197]: cdrom at /devices/pci0000:00/0000:00:1f.5/host1/target1:0:0/1:0:0:0 
Jan 20 10:25:58 lccmay6 udevsend[1211]: starting udevd daemon 
Jan 20 10:27:06 lccmay6 kernel: ata1: SATA max UDMA/133 cmd 0x1C68 ctl 0x1C5E bmdma 0x1C30 irq 185
Jan 20 10:25:59 lccmay6 start_udev: Starting udev:  succeeded 
Jan 20 10:27:06 lccmay6 kernel: ata2: SATA max UDMA/133 cmd 0x1C60 ctl 0x1C5A bmdma 0x1C38 irq 185
Jan 20 10:26:08 lccmay6 rc.sysinit: -e 
Jan 20 10:27:06 lccmay6 kernel: scsi0 : ata_piix
Jan 20 10:27:06 lccmay6 netfs: 他のファイルシステムをマウント中:  succeeded
Jan 20 10:26:32 lccmay6 sysctl: net.ipv4.ip_forward = 0 
Jan 20 10:27:06 lccmay6 kernel: scsi1 : ata_piix
Jan 20 10:26:32 lccmay6 sysctl: net.ipv4.conf.default.rp_filter = 1 
Jan 20 10:27:06 lccmay6 kernel: ata2.00: ATAPI, max UDMA/33
Jan 20 10:26:32 lccmay6 sysctl: net.ipv4.conf.default.accept_source_route = 0 
Jan 20 10:27:06 lccmay6 kernel: ata2.00: applying bridge limits
Jan 20 10:26:32 lccmay6 sysctl: kernel.sysrq = 0 
Jan 20 10:27:06 lccmay6 kernel: ata2.00: configured for UDMA/33
Jan 20 10:27:06 lccmay6 rc: lm_sensors を起動中:  succeeded
Jan 20 10:26:32 lccmay6 sysctl: kernel.core_uses_pid = 1 
Jan 20 10:27:06 lccmay6 kernel:   Vendor: TEAC      Model: DV-W28E-RW        Rev: G.B2
Jan 20 10:26:32 lccmay6 rc.sysinit: Configuring kernel parameters:  succeeded 
Jan 20 10:27:06 lccmay6 kernel:   Type:   CD-ROM                             ANSI SCSI revision: 05
Jan 20 10:26:32 lccmay6 rc.sysinit: Loading default keymap succeeded 
Jan 20 10:27:06 lccmay6 kernel: kjournald starting.  Commit interval 5 seconds
Jan 20 10:26:33 lccmay6 rc.sysinit: Setting hostname lccmay6.jpn.hp.com:  succeeded 
Jan 20 10:27:07 lccmay6 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 20 10:26:33 lccmay6 rc.sysinit: Checking root filesystem succeeded 
Jan 20 10:27:07 lccmay6 autofs: automount startup succeeded
Jan 20 10:26:34 lccmay6 rc.sysinit: Remounting root filesystem in read-write mode:  succeeded 
Jan 20 10:27:07 lccmay6 kernel: SELinux:  Disabled at runtime.
Jan 20 10:26:35 lccmay6 lvm.static:    
Jan 20 10:26:35 lccmay6 lvm.static: No volume groups found 
Jan 20 10:27:07 lccmay6 kernel: sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Jan 20 10:26:35 lccmay6 rc.sysinit: Setting up Logical Volume Management: succeeded 
Jan 20 10:27:07 lccmay6 kernel: Uniform CD-ROM driver Revision: 3.20
Jan 20 10:26:36 lccmay6 rc.sysinit: Checking filesystems succeeded 
Jan 20 10:26:36 lccmay6 rc.sysinit: Mounting local filesystems:  succeeded 
Jan 20 10:27:07 lccmay6 kernel: warning: many lost ticks.
Jan 20 10:26:36 lccmay6 rc.sysinit: Enabling local filesystem quotas:  succeeded 
Jan 20 10:27:08 lccmay6 kernel: Your time source seems to be instable or some driver is hogging interupts
Jan 20 10:26:36 lccmay6 rc.sysinit: Enabling swap space:  succeeded 
Jan 20 10:27:08 lccmay6 kernel: rip __do_softirq+0x41/0xa2
Jan 20 10:26:36 lccmay6 init: Entering runlevel: 5 
Jan 20 10:27:08 lccmay6 kernel: inserting floppy driver for 2.6.9-67.EL
Jan 20 10:26:37 lccmay6 microcode_ctl: microcode_ctl 起動 succeeded 
Jan 20 10:27:08 lccmay6 kernel: floppy0: no floppy controllers found
Jan 20 10:26:37 lccmay6 readahead_early: readahead をバックグランドで起動中:  
Jan 20 10:27:08 lccmay6 kernel: tg3.c:v3.77 (May 31, 2007)
Jan 20 10:26:38 lccmay6 rc: readahead_early を起動中:  succeeded 
Jan 20 10:27:08 lccmay6 kernel: ACPI: PCI Interrupt 0000:0e:00.0[A] -> GSI 17 (level, low) -> IRQ 177
Jan 20 10:26:58 lccmay6 kudzu:  succeeded 
Jan 20 10:26:58 lccmay6 rc: openibd を起動中:  succeeded 
Jan 20 10:26:59 lccmay6 pcmcia: Starting PCMCIA services:  
Jan 20 10:27:08 lccmay6 kernel: eth0: Tigon3 [partno(N/A) rev a200 PHY(5722/5756)] (PCI Express) 10/100/1000Base-T Ethernet 00:1f:29:0e:4a:0c
Jan 20 10:26:59 lccmay6 pcmcia: cardmgr[2962]: no sockets found! 
Jan 20 10:27:08 lccmay6 kernel: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
Jan 20 10:26:59 lccmay6 cardmgr[2962]: no sockets found! 
Jan 20 10:27:08 lccmay6 kernel: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
Jan 20 10:26:59 lccmay6 pcmcia: done. 
Jan 20 10:27:08 lccmay6 kernel: hw_random hardware driver 1.0.0 loaded
Jan 20 10:26:59 lccmay6 rc: pcmcia を起動中:  succeeded 
Jan 20 10:27:08 lccmay6 kernel: ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 185
Jan 20 10:26:59 lccmay6 sysctl: net.ipv4.ip_forward = 0 
Jan 20 10:27:09 lccmay6 kernel: ehci_hcd 0000:00:1a.7: EHCI Host Controller
Jan 20 10:26:59 lccmay6 sysctl: net.ipv4.conf.default.rp_filter = 1 
Jan 20 10:26:59 lccmay6 sysctl: net.ipv4.conf.default.accept_source_route = 0 
Jan 20 10:27:09 lccmay6 kernel: ehci_hcd 0000:00:1a.7: irq 185, pci mem ffffff0000024000
Jan 20 10:26:59 lccmay6 sysctl: kernel.sysrq = 0 
Jan 20 10:27:09 lccmay6 kernel: ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Jan 20 10:26:59 lccmay6 sysctl: kernel.core_uses_pid = 1 
Jan 20 10:26:59 lccmay6 network: ネットワークパラメーターを設定中:  succeeded 
Jan 20 10:27:09 lccmay6 kernel: ehci_hcd 0000:00:1a.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
Jan 20 10:26:59 lccmay6 network: ループバックインターフェイスを呼び込み中 succeeded 
Jan 20 10:27:09 lccmay6 kernel: hub 1-0:1.0: USB hub found
Jan 20 10:27:03 lccmay6 network: インターフェース eth0 を活性化中:  succeeded 
Jan 20 10:27:09 lccmay6 kernel: hub 1-0:1.0: 6 ports detected
Jan 20 10:27:09 lccmay6 kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 169
Jan 20 10:27:09 lccmay6 kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Jan 20 10:27:09 lccmay6 kernel: ehci_hcd 0000:00:1d.7: irq 169, pci mem ffffff0000026400
Jan 20 10:27:09 lccmay6 kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Jan 20 10:27:09 lccmay6 kernel: ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
Jan 20 10:27:09 lccmay6 kernel: hub 2-0:1.0: USB hub found
Jan 20 10:27:09 lccmay6 kernel: hub 2-0:1.0: 6 ports detected
Jan 20 10:27:09 lccmay6 kernel: USB Universal Host Controller Interface driver v2.2
Jan 20 10:27:09 lccmay6 kernel: ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 169
Jan 20 10:27:09 lccmay6 kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
Jan 20 10:27:09 lccmay6 kernel: uhci_hcd 0000:00:1a.0: irq 169, io base 0000000000001820
Jan 20 10:27:09 lccmay6 kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Jan 20 10:27:09 lccmay6 kernel: hub 3-0:1.0: USB hub found
Jan 20 10:27:09 lccmay6 kernel: hub 3-0:1.0: 2 ports detected
Jan 20 10:27:09 lccmay6 kernel: ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 177
Jan 20 10:27:09 lccmay6 kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
Jan 20 10:27:09 lccmay6 kernel: uhci_hcd 0000:00:1a.1: irq 177, io base 0000000000001840
Jan 20 10:27:09 lccmay6 kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Jan 20 10:27:09 lccmay6 kernel: hub 4-0:1.0: USB hub found
Jan 20 10:27:09 lccmay6 kernel: hub 4-0:1.0: 2 ports detected
Jan 20 10:27:09 lccmay6 kernel: ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 185
Jan 20 10:27:09 lccmay6 kernel: uhci_hcd 0000:00:1a.2: UHCI Host Controller
Jan 20 10:27:09 lccmay6 kernel: uhci_hcd 0000:00:1a.2: irq 185, io base 0000000000001860
Jan 20 10:27:09 lccmay6 kernel: uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
Jan 20 10:27:09 lccmay6 kernel: hub 5-0:1.0: USB hub found
Jan 20 10:27:09 lccmay6 kernel: hub 5-0:1.0: 2 ports detected
Jan 20 10:27:09 lccmay6 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
Jan 20 10:27:09 lccmay6 kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jan 20 10:27:09 lccmay6 kernel: uhci_hcd 0000:00:1d.0: irq 169, io base 0000000000001880
Jan 20 10:27:09 lccmay6 kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
Jan 20 10:27:09 lccmay6 kernel: hub 6-0:1.0: USB hub found
Jan 20 10:27:09 lccmay6 kernel: hub 6-0:1.0: 2 ports detected
Jan 20 10:27:09 lccmay6 kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 177
Jan 20 10:27:09 lccmay6 kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jan 20 10:27:09 lccmay6 kernel: uhci_hcd 0000:00:1d.1: irq 177, io base 00000000000018a0
Jan 20 10:27:09 lccmay6 kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
Jan 20 10:27:09 lccmay6 kernel: hub 7-0:1.0: USB hub found
Jan 20 10:27:09 lccmay6 kernel: hub 7-0:1.0: 2 ports detected
Jan 20 10:27:09 lccmay6 kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
Jan 20 10:27:09 lccmay6 kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jan 20 10:27:09 lccmay6 kernel: uhci_hcd 0000:00:1d.2: irq 185, io base 00000000000018c0
Jan 20 10:27:09 lccmay6 kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
Jan 20 10:27:09 lccmay6 kernel: hub 8-0:1.0: USB hub found
Jan 20 10:27:09 lccmay6 kernel: hub 8-0:1.0: 2 ports detected
Jan 20 10:27:09 lccmay6 kernel: usb 6-2: new full speed USB device using address 2
Jan 20 10:27:09 lccmay6 kernel: md: Autodetecting RAID arrays.
Jan 20 10:27:09 lccmay6 kernel: md: autorun ...
Jan 20 10:27:09 lccmay6 kernel: md: ... autorun DONE.
Jan 20 10:27:09 lccmay6 kernel: input: USB HID v1.11 Keyboard [ServerEngines SE USB Device] on usb-0000:00:1d.0-2
Jan 20 10:27:09 lccmay6 kernel: input: USB HID v1.11 Mouse [ServerEngines SE USB Device] on usb-0000:00:1d.0-2
Jan 20 10:27:09 lccmay6 kernel: NET: Registered protocol family 10
Jan 20 10:27:09 lccmay6 kernel: Disabled Privacy Extensions on device ffffffff804653e0(lo)
Jan 20 10:27:09 lccmay6 kernel: IPv6 over IPv4 tunneling driver
Jan 20 10:27:09 lccmay6 kernel: ACPI: Power Button (FF) [PWRF]
Jan 20 10:27:09 lccmay6 kernel: EXT3 FS on hda3, internal journal
Jan 20 10:27:09 lccmay6 kernel: device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com
Jan 20 10:27:09 lccmay6 kernel: kjournald starting.  Commit interval 5 seconds
Jan 20 10:27:09 lccmay6 kernel: EXT3 FS on hda1, internal journal
Jan 20 10:27:09 lccmay6 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 20 10:27:09 lccmay6 kernel: kjournald starting.  Commit interval 5 seconds
Jan 20 10:27:09 lccmay6 kernel: EXT3 FS on hdc1, internal journal
Jan 20 10:27:09 lccmay6 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 20 10:27:09 lccmay6 kernel: Adding 4096564k swap on /dev/hda2.  Priority:-1 extents:1
Jan 20 10:27:09 lccmay6 kernel: IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
Jan 20 10:27:09 lccmay6 kernel: microcode: CPU0 already at revision 0x32 (current=0x32)
Jan 20 10:27:09 lccmay6 kernel: microcode: No new microdata for cpu 0
Jan 20 10:27:09 lccmay6 kernel: IA-32 Microcode Update Driver v1.14 unregistered
Jan 20 10:27:09 lccmay6 kernel: Linux Kernel Card Services
Jan 20 10:27:09 lccmay6 kernel:   options:  [pci] [cardbus] [pm]
Jan 20 10:27:09 lccmay6 kernel: ip_tables: (C) 2000-2002 Netfilter core team
Jan 20 10:27:09 lccmay6 kernel: ip_tables: (C) 2000-2002 Netfilter core team
Jan 20 10:27:09 lccmay6 kernel: MSI INIT SUCCESS
Jan 20 10:27:09 lccmay6 kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 20 10:27:09 lccmay6 kernel: tg3: eth0: Link is up at 100 Mbps, full duplex.
Jan 20 10:27:09 lccmay6 kernel: tg3: eth0: Flow control is on for TX and on for RX.
Jan 20 10:27:09 lccmay6 kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jan 20 10:27:09 lccmay6 kernel: i2c /dev entries driver
Jan 20 10:27:12 lccmay6 smartd[3275]: smartd version 5.33 [x86_64-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen 
Jan 20 10:27:12 lccmay6 smartd[3275]: Home page is http://smartmontools.sourceforge.net/  
Jan 20 10:27:12 lccmay6 smartd[3275]: Opened configuration file /etc/smartd.conf 
Jan 20 10:27:12 lccmay6 smartd[3275]: Configuration file /etc/smartd.conf parsed. 
Jan 20 10:27:12 lccmay6 smartd[3275]: Device: /dev/hda, opened 
Jan 20 10:27:12 lccmay6 smartd[3275]: Device: /dev/hda, not found in smartd database. 
Jan 20 10:27:12 lccmay6 smartd[3275]: Device: /dev/hda, is SMART capable. Adding to "monitor" list. 
Jan 20 10:27:12 lccmay6 smartd[3275]: Device: /dev/hdc, opened 
Jan 20 10:27:12 lccmay6 smartd[3275]: Device: /dev/hdc, not found in smartd database. 
Jan 20 10:27:12 lccmay6 smartd[3275]: Device: /dev/hdc, is SMART capable. Adding to "monitor" list. 
Jan 20 10:27:12 lccmay6 smartd[3275]: Monitoring 2 ATA and 0 SCSI devices 
Jan 20 10:27:13 lccmay6 smartd[3277]: smartd has fork()ed into background mode. New PID=3277. 
Jan 20 10:27:13 lccmay6 smartd: smartd 起動 succeeded
Jan 20 10:27:13 lccmay6 acpid: acpid 起動 succeeded
Jan 20 10:27:14 lccmay6 kernel: lp: driver loaded but no devices found
Jan 20 10:27:15 lccmay6 cups: cupsd 起動 succeeded
Jan 20 10:27:15 lccmay6 sshd: RSA1 キー生成 succeeded
Jan 20 10:27:15 lccmay6 sshd: RSA キー生成 succeeded
Jan 20 10:27:16 lccmay6 sshd: DSA キー生成 succeeded
Jan 20 10:27:16 lccmay6 sshd:  succeeded
Jan 20 10:27:16 lccmay6 xinetd: xinetd 起動 succeeded
Jan 20 10:27:16 lccmay6 xinetd[3355]: xinetd Version 2.3.13 started with libwrap loadavg options compiled in.
Jan 20 10:27:16 lccmay6 xinetd[3355]: Started working: 0 available services
Jan 20 10:27:17 lccmay6 sendmail: sendmail 起動 succeeded
Jan 20 10:27:17 lccmay6 sendmail: sm-client 起動 succeeded
Jan 20 10:27:17 lccmay6 gpm[3394]: *** info [startup.c(95)]: 
Jan 20 10:27:17 lccmay6 gpm[3394]: Started gpm successfully. Entered daemon mode.
Jan 20 10:27:17 lccmay6 gpm[3394]: *** info [mice.c(1766)]: 
Jan 20 10:27:17 lccmay6 gpm[3394]: imps2: Auto-detected intellimouse PS/2
Jan 20 10:27:18 lccmay6 gpm: gpm 起動 succeeded
Jan 20 10:27:18 lccmay6 iiim: htt 起動 succeeded
Jan 20 10:27:19 lccmay6 htt_server[3426]: started.
Jan 20 10:27:22 lccmay6 canna:  succeeded
Jan 20 10:27:22 lccmay6 crond: crond 起動 succeeded
Jan 20 10:27:25 lccmay6 xfs: xfs 起動 succeeded
Jan 20 10:27:25 lccmay6 anacron: anacron 起動 succeeded
Jan 20 10:27:25 lccmay6 atd: atd 起動 succeeded
Jan 20 10:27:29 lccmay6 gconfd (root-3533): 起動中 (バージョン 2.8.1), PID 3533 ユーザ 'root'
Jan 20 10:27:29 lccmay6 gconfd (root-3533): 読み込み専用の設定ソースに対するアドレス "xml:readonly:/etc/gconf/gconf.xml.mandatory" (0 行目) を解決しました
Jan 20 10:27:29 lccmay6 gconfd (root-3533): 書き込み可能な設定ソースに対するアドレス "xml:readwrite:/root/.gconf" (1 行目) を解決しました
Jan 20 10:27:29 lccmay6 gconfd (root-3533): 読み込み専用の設定ソースに対するアドレス "xml:readonly:/etc/gconf/gconf.xml.defaults" (2 行目) を解決しました
Jan 20 10:28:49 lccmay6 firstboot:  succeeded
Jan 20 10:28:49 lccmay6 readahead: readahead をバックグランドで起動中: 
Jan 20 10:28:49 lccmay6 rc: readahead を起動中:  succeeded
Jan 20 10:28:51 lccmay6 messagebus: messagebus 起動 succeeded
Jan 20 10:28:51 lccmay6 cups-config-daemon: cups-config-daemon 起動 succeeded
Jan 20 10:28:51 lccmay6 haldaemon: haldaemon 起動 succeeded
Jan 20 10:28:53 lccmay6 fstab-sync[3717]: removed all generated mount points
Jan 20 10:28:55 lccmay6 gpm[3394]: *** info [mice.c(1766)]: 
Jan 20 10:28:55 lccmay6 gpm[3394]: imps2: Auto-detected intellimouse PS/2
Jan 20 10:28:56 lccmay6 fstab-sync[4513]: added mount point /media/cdrecorder for /dev/scd0
Jan 20 10:28:59 lccmay6 gconfd (root-3533): GConf サーバが使用されていません。シャットダウンします。
Jan 20 10:28:59 lccmay6 gconfd (root-3533): 終了します。
Jan 20 10:29:10 lccmay6 login(pam_unix)[3695]: session opened for user root by LOGIN(uid=0)
Jan 20 10:29:10 lccmay6  -- root[3695]: ROOT LOGIN ON tty1