Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.4-RELEASE #0 r362094: Fri Jun 12 18:27:15 UTC 2020
    root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 10.0.0 (git@github.com:llvm/llvm-project.git llvmorg-10.0.0-0-gd32170dbd5b)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E5-2603 v3 @ 1.60GHz (1598.18-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306f2  Family=0x6  Model=0x3f  Stepping=2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG>
  Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 68717379584 (65534 MB)
avail memory = 66584408064 (63499 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HP     ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 2 package(s) x 6 core(s)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
SMP: AP CPU #9 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #6 Launched!
Timecounter "TSC" frequency 1598180668 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
000.000030 [4213] netmap_init               netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff20a0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <HP ProLiant> on motherboard
acpi0: Power Button (fixed)
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <dasp, performance counters> at device 11.1 (no driver attached)
pci0: <dasp, performance counters> at device 11.2 (no driver attached)
pci0: <dasp, performance counters> at device 16.1 (no driver attached)
pci0: <dasp, performance counters> at device 16.6 (no driver attached)
pci0: <dasp, performance counters> at device 18.1 (no driver attached)
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
pci1: <dasp, performance counters> at device 11.1 (no driver attached)
pci1: <dasp, performance counters> at device 11.2 (no driver attached)
pci1: <dasp, performance counters> at device 16.1 (no driver attached)
pci1: <dasp, performance counters> at device 16.6 (no driver attached)
pci1: <dasp, performance counters> at device 18.1 (no driver attached)
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
pcib2: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pcib2: _OSC returned error 0x10
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 26 at device 1.0 numa-domain 0 on pci2
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
ciss0: <HP Smart Array P440ar> port 0x2000-0x20ff mem 0x92c00000-0x92cfffff,0x92d00000-0x92d003ff irq 16 at device 0.0 numa-domain 0 on pci3
ciss0: PERFORMANT Transport
pcib4: <ACPI PCI-PCI bridge> irq 26 at device 1.1 numa-domain 0 on pci2
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 32 at device 2.0 numa-domain 0 on pci2
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 32 at device 2.1 numa-domain 0 on pci2
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 32 at device 2.2 numa-domain 0 on pci2
pci7: <ACPI PCI bus> numa-domain 0 on pcib7
pcib8: <ACPI PCI-PCI bridge> irq 32 at device 2.3 numa-domain 0 on pci2
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
pcib9: <ACPI PCI-PCI bridge> irq 40 at device 3.0 numa-domain 0 on pci2
pci9: <ACPI PCI bus> numa-domain 0 on pcib9
pcib10: <ACPI PCI-PCI bridge> irq 40 at device 3.1 numa-domain 0 on pci2
pci10: <ACPI PCI bus> numa-domain 0 on pcib10
pcib11: <ACPI PCI-PCI bridge> irq 40 at device 3.2 numa-domain 0 on pci2
pci11: <ACPI PCI bus> numa-domain 0 on pcib11
pcib12: <ACPI PCI-PCI bridge> irq 40 at device 3.3 numa-domain 0 on pci2
pci12: <ACPI PCI bus> numa-domain 0 on pcib12
pci2: <unknown> at device 17.0 (no driver attached)
xhci0: <Intel Wellsburg USB 3.0 controller> mem 0x39ffff00000-0x39ffff0ffff irq 19 at device 20.0 numa-domain 0 on pci2
xhci0: 32 bytes context size, 64-bit DMA
usbus0 numa-domain 0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ehci0: <Intel Wellsburg USB 2.0 controller> mem 0x92e02000-0x92e023ff irq 18 at device 26.0 numa-domain 0 on pci2
usbus1: EHCI version 1.0
usbus1 numa-domain 0 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pcib13: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci2
pci13: <ACPI PCI bus> numa-domain 0 on pcib13
pcib14: <ACPI PCI-PCI bridge> irq 18 at device 28.2 numa-domain 0 on pci2
pci14: <ACPI PCI bus> numa-domain 0 on pcib14
vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x92a88000-0x92a8bfff,0x92000000-0x927fffff irq 19 at device 0.1 numa-domain 0 on pci14
vgapci0: Boot video device
uhci0: <HP iLO Standard Virtual USB controller> port 0x1300-0x131f irq 19 at device 0.4 numa-domain 0 on pci14
usbus2 numa-domain 0 on uhci0
usbus2: 12Mbps Full Speed USB v1.0
pcib15: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci2
pci15: <ACPI PCI bus> numa-domain 0 on pcib15
bge0: <HPE Ethernet 1Gb 4-port 331i Adapter, ASIC rev. 0x5719001> mem 0x92b90000-0x92b9ffff,0x92ba0000-0x92baffff,0x92bb0000-0x92bbffff irq 16 at device 0.0 numa-domain 0 on pci15
bge0: APE FW version: NCSI v1.5.12.0
bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus0: <MII bus> numa-domain 0 on bge0
brgphy0: <BCM5719C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: 38:63:bb:3e:ef:c8
bge1: <HPE Ethernet 1Gb 4-port 331i Adapter, ASIC rev. 0x5719001> mem 0x92b60000-0x92b6ffff,0x92b70000-0x92b7ffff,0x92b80000-0x92b8ffff irq 17 at device 0.1 numa-domain 0 on pci15
bge1: APE FW version: NCSI v1.5.12.0
bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus1: <MII bus> numa-domain 0 on bge1
brgphy1: <BCM5719C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: 38:63:bb:3e:ef:c9
bge2: <HPE Ethernet 1Gb 4-port 331i Adapter, ASIC rev. 0x5719001> mem 0x92b30000-0x92b3ffff,0x92b40000-0x92b4ffff,0x92b50000-0x92b5ffff irq 16 at device 0.2 numa-domain 0 on pci15
bge2: APE FW version: NCSI v1.5.12.0
bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus2: <MII bus> numa-domain 0 on bge2
brgphy2: <BCM5719C 1000BASE-T media interface> PHY 3 on miibus2
brgphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge2: Using defaults for TSO: 65518/35/2048
bge2: Ethernet address: 38:63:bb:3e:ef:ca
bge3: <HPE Ethernet 1Gb 4-port 331i Adapter, ASIC rev. 0x5719001> mem 0x92b00000-0x92b0ffff,0x92b10000-0x92b1ffff,0x92b20000-0x92b2ffff irq 17 at device 0.3 numa-domain 0 on pci15
bge3: APE FW version: NCSI v1.5.12.0
bge3: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus3: <MII bus> numa-domain 0 on bge3
brgphy3: <BCM5719C 1000BASE-T media interface> PHY 4 on miibus3
brgphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge3: Using defaults for TSO: 65518/35/2048
bge3: Ethernet address: 38:63:bb:3e:ef:cb
pcib16: <ACPI PCI-PCI bridge> irq 18 at device 28.6 numa-domain 0 on pci2
pci16: <ACPI PCI bus> numa-domain 0 on pcib16
pcib17: <ACPI PCI-PCI bridge> irq 19 at device 28.7 numa-domain 0 on pci2
pci17: <ACPI PCI bus> numa-domain 0 on pcib17
ehci1: <Intel Wellsburg USB 2.0 controller> mem 0x92e01000-0x92e013ff irq 18 at device 29.0 numa-domain 0 on pci2
usbus3: EHCI version 1.0
usbus3 numa-domain 0 on ehci1
usbus3: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci2
isa0: <ISA bus> numa-domain 0 on isab0
ahci0: <Intel Wellsburg AHCI SATA controller> port 0x3058-0x305f,0x307c-0x307f,0x3050-0x3057,0x3078-0x307b,0x3020-0x303f mem 0x92e00000-0x92e007ff irq 16 at device 31.2 numa-domain 0 on pci2
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib18: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib18: _OSC returned error 0x10
pci18: <ACPI PCI bus> numa-domain 1 on pcib18
pcib19: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 1 on pci18
pci19: <ACPI PCI bus> numa-domain 1 on pcib19
pcib20: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 1 on pci18
pci20: <ACPI PCI bus> numa-domain 1 on pcib20
pcib21: <ACPI PCI-PCI bridge> at device 1.1 numa-domain 1 on pci18
pci21: <ACPI PCI bus> numa-domain 1 on pcib21
pcib22: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 1 on pci18
pci22: <ACPI PCI bus> numa-domain 1 on pcib22
pcib23: <ACPI PCI-PCI bridge> at device 2.1 numa-domain 1 on pci18
pci23: <ACPI PCI bus> numa-domain 1 on pcib23
pcib24: <ACPI PCI-PCI bridge> at device 2.2 numa-domain 1 on pci18
pci24: <ACPI PCI bus> numa-domain 1 on pcib24
pcib25: <ACPI PCI-PCI bridge> at device 2.3 numa-domain 1 on pci18
pci25: <ACPI PCI bus> numa-domain 1 on pcib25
pcib26: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 1 on pci18
pci26: <ACPI PCI bus> numa-domain 1 on pcib26
pcib27: <ACPI PCI-PCI bridge> at device 3.1 numa-domain 1 on pci18
pci27: <ACPI PCI bus> numa-domain 1 on pcib27
pcib28: <ACPI PCI-PCI bridge> at device 3.2 numa-domain 1 on pci18
pci28: <ACPI PCI bus> numa-domain 1 on pcib28
pcib29: <ACPI PCI-PCI bridge> at device 3.3 numa-domain 1 on pci18
pci29: <ACPI PCI bus> numa-domain 1 on pcib29
cpu0: <ACPI CPU> numa-domain 0 on acpi0
cpu1: <ACPI CPU> numa-domain 0 on acpi0
cpu2: <ACPI CPU> numa-domain 0 on acpi0
cpu3: <ACPI CPU> numa-domain 0 on acpi0
cpu4: <ACPI CPU> numa-domain 0 on acpi0
cpu5: <ACPI CPU> numa-domain 0 on acpi0
cpu6: <ACPI CPU> numa-domain 1 on acpi0
cpu7: <ACPI CPU> numa-domain 1 on acpi0
cpu8: <ACPI CPU> numa-domain 1 on acpi0
cpu9: <ACPI CPU> numa-domain 1 on acpi0
cpu10: <ACPI CPU> numa-domain 1 on acpi0
cpu11: <ACPI CPU> numa-domain 1 on acpi0
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0
est1: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu1
est2: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu2
est3: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu3
est4: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu4
est5: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu5
est6: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu6
est7: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu7
est8: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu8
est9: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu9
est10: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu10
est11: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu11
Timecounters tick every 1.000 msec
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen2.1: <HP UHCI root HUB> at usbus2
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen3.1: <Intel EHCI root HUB> at usbus3
uhub0: da0 at ciss0 bus 0 scbus0 target 0 lun 0
ses0 at ahciem0 bus 0 scbus3 target 0 lun 0
cd0 at ahcich5 bus 0 scbus2 target 0 lun 0
da0: <HP RAID 5 OK> Fixed Direct Access SPC-3 SCSI device
da0: Serial Number PDNLK0BRH7X0BZ  
cd0: <hp DVD RAM UJ8E2 SE03> Removable CD-ROM SCSI device
cd0: Serial Number H086 012934
<0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
da0: 135.168MB/s transfers
da0: Command Queueing enabled
da0: 953816MB (1953415216 512 byte sectors)
cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray open
ses0: pass1,cd0 in 'Slot 05', SATA Slot: scbus2 target 0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub3: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
Trying to mount root from ufs:/dev/da0s1a [rw]...
uhub3: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub0: 21 ports with 21 removable, self powered
random: unblocking device.
ugen0.2: <vendor 0x0424 product 0x2660> at usbus0
uhub4 numa-domain 0 on uhub0
uhub4: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 1> on usbus0
ugen1.2: <vendor 0x8087 product 0x800a> at usbus1
uhub5 numa-domain 0 on uhub1
uhub5: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1
ugen3.2: <vendor 0x8087 product 0x8002> at usbus3
uhub6 numa-domain 0 on uhub2
uhub6: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus3
uhub5: 6 ports with 6 removable, self powered
uhub4: 2 ports with 1 removable, self powered
uhub6: 8 ports with 8 removable, self powered
lo0: link state changed to UP
ugen0.3: <Avocent USB DSRIQ> at usbus0
ukbd0 numa-domain 0 on uhub0
ukbd0: <EP1 Interrupt> on usbus0
kbd2 at ukbd0
bge0: link state changed to DOWN
ums0 numa-domain 0 on uhub0
ums0: <EP2 Interrupt> on usbus0
ums0: 5 buttons and [XYZ] coordinates ID=1
bge0: link state changed to UP