Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.3-RELEASE #0 r349754: Fri Jul  5 04:45:24 UTC 2019
    root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) (based on LLVM 8.0.0)
VT(efifb): resolution 1024x768
CPU: Intel(R) Xeon(R) Bronze 3104 CPU @ 1.70GHz (1696.07-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x50654  Family=0x6  Model=0x55  Stepping=4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0xd39ffffb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,MPX,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,AVX512CD,AVX512BW,AVX512VL>
  Structured Extended Features2=0x8<PKU>
  Structured Extended Features3=0x9c002400<MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 32941588480 (31415 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HPE    Server  >
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 2 package(s) x 6 core(s)
ioapic6: Changing APIC ID to 16
ioapic7: Changing APIC ID to 17
ioapic8: Changing APIC ID to 18
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-31 on motherboard
ioapic2 <Version 2.0> irqs 32-39 on motherboard
ioapic3 <Version 2.0> irqs 40-47 on motherboard
ioapic4 <Version 2.0> irqs 48-55 on motherboard
ioapic5 <Version 2.0> irqs 56-63 on motherboard
ioapic6 <Version 2.0> irqs 64-71 on motherboard
ioapic7 <Version 2.0> irqs 72-79 on motherboard
ioapic8 <Version 2.0> irqs 80-87 on motherboard
SMP: AP CPU #8 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #10 Launched!
Timecounter "TSC" frequency 1696066684 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
000.000030 [4213] netmap_init               netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff81005eb0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <HPE Server> on motherboard
acpi0: Power Button (fixed)
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 350
Event timer "HPET1" frequency 24000000 Hz quality 340
Event timer "HPET2" frequency 24000000 Hz quality 340
Event timer "HPET3" frequency 24000000 Hz quality 340
Event timer "HPET4" frequency 24000000 Hz quality 340
Event timer "HPET5" frequency 24000000 Hz quality 340
Event timer "HPET6" frequency 24000000 Hz quality 340
Event timer "HPET7" frequency 24000000 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> numa-domain 0 on pcib0
pci0: <dasp, performance counters> at device 8.1 (no driver attached)
pci0: <unknown> at device 17.0 (no driver attached)
pci0: <unknown> at device 17.1 (no driver attached)
ahci0: <Intel Lewisburg AHCI SATA controller> port 0x2040-0x2047,0x2048-0x204b,0x2020-0x203f mem 0xd9e94000-0xd9e95fff,0xd9e96000-0xd9e960ff,0xd9e00000-0xd9e7ffff at device 17.5 numa-domain 0 on pci0
ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
xhci0: <Intel Lewisburg USB 3.0 controller> mem 0xd9e80000-0xd9e8ffff at device 20.0 numa-domain 0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 numa-domain 0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.4 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci0
pci1: <ACPI PCI bus> numa-domain 0 on pcib1
bge0: <HPE Ethernet 1Gb 4-port 331i Adapter, ASIC rev. 0x5719001> mem 0xd9d90000-0xd9d9ffff,0xd9da0000-0xd9daffff,0xd9db0000-0xd9dbffff at device 0.0 numa-domain 0 on pci1
bge0: APE FW version: NCSI v1.5.12.0
bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus0: <MII bus> numa-domain 0 on bge0
brgphy0: <BCM5719C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: 98:f2:b3:3f:b5:24
bge1: <HPE Ethernet 1Gb 4-port 331i Adapter, ASIC rev. 0x5719001> mem 0xd9d60000-0xd9d6ffff,0xd9d70000-0xd9d7ffff,0xd9d80000-0xd9d8ffff at device 0.1 numa-domain 0 on pci1
bge1: APE FW version: NCSI v1.5.12.0
bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus1: <MII bus> numa-domain 0 on bge1
brgphy1: <BCM5719C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: 98:f2:b3:3f:b5:25
bge2: <HPE Ethernet 1Gb 4-port 331i Adapter, ASIC rev. 0x5719001> mem 0xd9d30000-0xd9d3ffff,0xd9d40000-0xd9d4ffff,0xd9d50000-0xd9d5ffff at device 0.2 numa-domain 0 on pci1
bge2: APE FW version: NCSI v1.5.12.0
bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus2: <MII bus> numa-domain 0 on bge2
brgphy2: <BCM5719C 1000BASE-T media interface> PHY 3 on miibus2
brgphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge2: Using defaults for TSO: 65518/35/2048
bge2: Ethernet address: 98:f2:b3:3f:b5:26
bge3: <HPE Ethernet 1Gb 4-port 331i Adapter, ASIC rev. 0x5719001> mem 0xd9d00000-0xd9d0ffff,0xd9d10000-0xd9d1ffff,0xd9d20000-0xd9d2ffff at device 0.3 numa-domain 0 on pci1
bge3: APE FW version: NCSI v1.5.12.0
bge3: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus3: <MII bus> numa-domain 0 on bge3
brgphy3: <BCM5719C 1000BASE-T media interface> PHY 4 on miibus3
brgphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge3: Using defaults for TSO: 65518/35/2048
bge3: Ethernet address: 98:f2:b3:3f:b5:27
pcib2: <ACPI PCI-PCI bridge> at device 28.4 numa-domain 0 on pci0
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
vgapci0: <VGA-compatible display> mem 0xd8000000-0xd8ffffff,0xd9b98000-0xd9b9bfff,0xd9000000-0xd97fffff at device 0.1 numa-domain 0 on pci2
vgapci0: Boot video device
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd9b9c000-0xd9b9c0ff at device 0.4 numa-domain 0 on pci2
usbus1: EHCI version 1.0
usbus1 numa-domain 0 on ehci0
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0
isa0: <ISA bus> numa-domain 0 on isab0
pci0: <memory> at device 31.2 (no driver attached)
pcib3: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pcib3: _OSC returned error 0x10
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 0 on pci3
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
pcib5: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pcib5: _OSC returned error 0x10
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 0 on pci5
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 0 on pci5
pci7: <ACPI PCI bus> numa-domain 0 on pcib7
pcib8: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pcib8: _OSC returned error 0x10
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 0 on pci8
pci9: <ACPI PCI bus> numa-domain 0 on pcib9
smartpqi0: <P408i-a SR Gen10> port 0x8000-0x80ff mem 0xe6c00000-0xe6c07fff at device 0.0 numa-domain 0 on pci9
smartpqi0: using MSI-X interrupts (12 vectors)
[ERROR]::[92:655.0][CPU 10][pqisrc_process_config_table][459]:unrecognized PQI config table section ID: 0x5
pcib10: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 0 on pci8
pci10: <ACPI PCI bus> numa-domain 0 on pcib10
pci8: <dasp, performance counters> at device 14.0 (no driver attached)
pci8: <dasp, performance counters> at device 15.0 (no driver attached)
pci8: <dasp, performance counters> at device 18.0 (no driver attached)
pci8: <dasp, performance counters> at device 18.1 (no driver attached)
pcib11: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib11: _OSC returned error 0x10
pci11: <ACPI PCI bus> numa-domain 1 on pcib11
pci11: <dasp, performance counters> at device 8.1 (no driver attached)
pcib12: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib12: _OSC returned error 0x10
pci12: <ACPI PCI bus> numa-domain 1 on pcib12
pcib13: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 1 on pci12
pci13: <ACPI PCI bus> numa-domain 1 on pcib13
pcib14: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib14: _OSC returned error 0x10
pci14: <ACPI PCI bus> numa-domain 1 on pcib14
pcib15: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 1 on pci14
pci15: <ACPI PCI bus> numa-domain 1 on pcib15
pcib16: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib16: _OSC returned error 0x10
pci16: <ACPI PCI bus> numa-domain 1 on pcib16
pcib17: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 1 on pci16
pci17: <ACPI PCI bus> numa-domain 1 on pcib17
pci16: <dasp, performance counters> at device 14.0 (no driver attached)
pci16: <dasp, performance counters> at device 15.0 (no driver attached)
pci16: <dasp, performance counters> at device 18.0 (no driver attached)
pci16: <dasp, performance counters> at device 18.1 (no driver attached)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
Timecounters tick every 1.000 msec
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen1.1: <0x103c EHCI root HUB> at usbus1
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1: <0x103c EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 26 ports with 26 removable, self powered
da0 at smartpqi0 bus 0 scbus7 target 0 lun 0
da0: <MSCC RAID 1(1+0) OK> Fixed Direct Access SPC-3 SCSI device
da0: Serial Number PEYHC0CRHAA460 
da0: 1200.000MB/s transfers
da0: Command Queueing enabled
da0: 286070MB (585871964 512 byte sectors)
da1 at smartpqi0 bus 0 scbus7 target 66 lun 0
da1: <HP MO0200JDVET HPD2> Fixed Direct Access SPC-4 SCSI device
da1: Serial Number 2KV66N2A
da1: 1200.000MB/s transfers
da1: Command Queueing enabled
da1: 190782MB (390721968 512 byte sectors)
da2 at smartpqi0 bus 0 scbus7 target 69 lun 0
da2: <ATA TK0080GDSAE HPG0> Fixed Direct Access SPC-4 SCSI device
da2: Serial Number BTWL333106LG080KGN  
da2: 1200.000MB/s transfers
da2: Command Queueing enabled
ugen0.2: <vendor 0x0424 product 0x2660> at usbus0
da2: 76319MB (156301488 512 byte sectors)
cd0 at ahcich3 bus 0 scbus3 target 0 lun 0
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
uhub2GEOM: da1: the primary GPT table is corrupt or invalid.
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses1 at smartpqi0 bus 0 scbus7 target 187 lun 0
cd0: <hp DVD-ROM DUD0N UMD0> Removable CD-ROM SCSI device
cd0: Serial Number KZUH99J5735
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, GEOM: da1: using the secondary instead -- recovery strongly advised.
ses1: <HPE Smart Adapter 2.65> Fixed Enclosure Services SPC-3 SCSI device
ses1: Serial Number PEYHC0CRHAA460 
ses1: 1200.000MB/s transfers
ses1: SCSI-3 ENC Device
ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray open
 numa-domain 0 on uhub0
pass6 at smartpqi0 bus 0 scbus7 target 1088 lun 0
uhub2: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 1> on usbus0
GEOM: da2: the secondary GPT header is not in the last LBA.
pass6: <HPE P408i-a SR Gen10 2.65> Fixed Storage Array SPC-3 SCSI device
pass6: Serial Number PEYHC0CRHAA460 
pass6: 1200.000MB/s transfers
pass6: Command Queueing enabled
ses1: da1,pass3: Element descriptor: 'ArrayElement0002'
ses1: da1,pass3: SAS Device Slot Element: 1 Phys at Slot 3
GEOM: diskid/DISK-2KV66N2A: the primary GPT table is corrupt or invalid.
ses1:  phy 0: SAS device type 1 id 2
ses1:  phy 0: protocols: Initiator( None ) Target( SSP )
ses1:  phy 0: parent 51402ec010123dd0 addr 5000cca02b0b4cb9
ses1: da2,pass4: Element descriptor: 'ArrayElement0005'
ses1: da2,pass4: SAS Device Slot Element: 1 Phys at Slot 6
ses1:  phy 0: SATA device
ses1:  phy 0: parent 51402ec010123dd4 addr 31402ec010123dd5
GEOM: diskid/DISK-2KV66N2A: using the secondary instead -- recovery strongly advised.
Trying to mount root from ufs:/dev/da0p2 [rw]...
uhub2: 2 ports with 1 removable, self powered
GEOM: diskid/DISK-BTWL333106LG080KGN%20%20: the secondary GPT header is not in the last LBA.
random: unblocking device.
ugen0.3: <Avocent HP 336047-B21> at usbus0
ukbd0 numa-domain 0 on uhub0
ukbd0: <EP1 Interrupt> on usbus0
kbd2 at ukbd0
uhub1: 8 ports with 8 removable, self powered
lo0: link state changed to UP
bge0: link state changed to DOWN
ugen0.4: <Generic USB3.0-CRW> at usbus0
umass0 numa-domain 0 on uhub0
umass0: <Bulk-In, Bulk-Out, Interface> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x4000
umass0:8:0: Attached to scbus8
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB)
(probe0:umass-sim0:0:0:0): Error 22, Unretryable error
da3 at umass-sim0 bus 0 scbus8 target 0 lun 0
da3: <Generic- SD/MMC CRW 1.00> Removable Direct Access SPC-4 SCSI device
da3: Serial Number 29203008282014000
da3: 400.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
da3: quirks=0x2<NO_6_BYTE>
ugen1.2: <iLO Virtual Keyboard> at usbus1
ukbd1 numa-domain 0 on uhub1
ukbd1: <Virtual Keyboard> on usbus1
kbd3 at ukbd1
ugen1.3: <HPE Virtual NIC> at usbus1
uhub_explore: illegal enable change, port 1
uhub_explore: illegal enable change, port 4
ums0 numa-domain 0 on uhub1
ums0: <Virtual Mouse> on usbus1
ums0: 3 buttons and [Z] coordinates ID=0
ums1 numa-domain 0 on uhub0
ums1: <EP2 Interrupt> on usbus0
ums1: 5 buttons and [XYZ] coordinates ID=1
bge0: link state changed to UP