---<>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-RELEASE r341666 GENERIC amd64 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(efifb): resolution 1024x768 CPU: AMD EPYC 7262 8-Core Processor (3194.07-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x830f10 Family=0x17 Model=0x31 Stepping=0 Features=0x178bfbff Features2=0x7ed8320b AMD Features=0x2e500800 AMD Features2=0x75c237ff> Structured Extended Features=0x219c91a9 Structured Extended Features2=0x400004 XSAVE Features=0xf AMD Extended Feature Extensions ID EBX=0x18cf757 SVM: (disabled in BIOS) NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 TSC: P-state invariant, performance statistics real memory = 137434759168 (131068 MB) avail memory = 133591683072 (127402 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs FreeBSD/SMP: 1 package(s) x 8 cache groups x 1 core(s) x 2 hardware threads random: unblocking device. ioapic0: Changing APIC ID to 128 ioapic1: Changing APIC ID to 129 ioapic2: Changing APIC ID to 130 ioapic3: Changing APIC ID to 131 ioapic4: Changing APIC ID to 132 ioapic0 irqs 0-23 on motherboard ioapic1 irqs 24-55 on motherboard ioapic2 irqs 56-87 on motherboard ioapic3 irqs 88-119 on motherboard ioapic4 irqs 120-151 on motherboard Launching APs: 2 3 11 8 13 1 12 10 6 4 14 7 5 15 9 Timecounter "TSC-low" frequency 1597034400 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" nexus0 efirtc0: on motherboard efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: on motherboard acpi0: on motherboard acpi0: Power Button (fixed) unknown: I/O range not supported cpu0: numa-domain 0 on acpi0 attimer0: port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: iomem 0xfed00000-0xfed001ff on acpi0 hpet0: memory region width 512 too small device_attach: hpet0 attach returned 6 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_button0: on acpi0 acpi_syscontainer0: on acpi0 pcib0: numa-domain 0 on acpi0 pci0: numa-domain 0 on pcib0 pci0: at device 0.2 (no driver attached) pcib1: at device 1.1 numa-domain 0 on pci0 pci1: numa-domain 0 on pcib1 pci1: at device 0.0 (no driver attached) pci1: at device 0.1 (no driver attached) pcib2: at device 1.3 numa-domain 0 on pci0 pci2: numa-domain 0 on pcib2 bge0: mem 0xd2090000-0xd209ffff,0xd20a0000-0xd20affff,0xd20b0000-0xd20bffff at device 0.0 numa-domain 0 on pci2 bge0: APE FW version: NCSI v1.5.12.0 bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus0: numa-domain 0 on bge0 brgphy0: PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Using defaults for TSO: 65518/35/2048 bge0: Ethernet address: 20:67:7c:d3:9a:2c bge1: mem 0xd2060000-0xd206ffff,0xd2070000-0xd207ffff,0xd2080000-0xd208ffff at device 0.1 numa-domain 0 on pci2 bge1: APE FW version: NCSI v1.5.12.0 bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus1: numa-domain 0 on bge1 brgphy1: PHY 2 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: Using defaults for TSO: 65518/35/2048 bge1: Ethernet address: 20:67:7c:d3:9a:2d bge2: mem 0xd2030000-0xd203ffff,0xd2040000-0xd204ffff,0xd2050000-0xd205ffff at device 0.2 numa-domain 0 on pci2 bge2: APE FW version: NCSI v1.5.12.0 bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus2: numa-domain 0 on bge2 brgphy2: PHY 3 on miibus2 brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge2: Using defaults for TSO: 65518/35/2048 bge2: Ethernet address: 20:67:7c:d3:9a:2e bge3: mem 0xd2000000-0xd200ffff,0xd2010000-0xd201ffff,0xd2020000-0xd202ffff at device 0.3 numa-domain 0 on pci2 bge3: APE FW version: NCSI v1.5.12.0 bge3: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus3: numa-domain 0 on bge3 brgphy3: PHY 4 on miibus3 brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge3: Using defaults for TSO: 65518/35/2048 bge3: Ethernet address: 20:67:7c:d3:9a:2f pcib3: at device 1.5 numa-domain 0 on pci0 pci3: numa-domain 0 on pcib3 vgapci0: mem 0xcc000000-0xccffffff,0xcdba0000-0xcdba3fff,0xcd000000-0xcd7fffff at device 0.1 numa-domain 0 on pci3 vgapci0: Boot video device ehci0: mem 0xcdba4000-0xcdba40ff at device 0.4 numa-domain 0 on pci3 usbus0: EHCI version 1.0 usbus0 numa-domain 0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 pcib4: at device 3.1 numa-domain 0 on pci0 pci4: numa-domain 0 on pcib4 pcib5: at device 7.1 numa-domain 0 on pci0 pci5: numa-domain 0 on pcib5 pci5: at device 0.0 (no driver attached) pci5: at device 0.2 (no driver attached) pcib6: at device 8.1 numa-domain 0 on pci0 pci6: numa-domain 0 on pcib6 pci6: at device 0.0 (no driver attached) pci6: at device 0.2 (no driver attached) pcib7: numa-domain 0 on acpi0 pci7: numa-domain 0 on pcib7 pci7: at device 0.2 (no driver attached) pcib8: at device 1.1 numa-domain 0 on pci7 pci8: numa-domain 0 on pcib8 pcib9: at device 3.1 numa-domain 0 on pci7 pci9: numa-domain 0 on pcib9 pcib10: at device 7.1 numa-domain 0 on pci7 pci10: numa-domain 0 on pcib10 pci10: at device 0.0 (no driver attached) pci10: at device 0.2 (no driver attached) pcib11: at device 8.1 numa-domain 0 on pci7 pci11: numa-domain 0 on pcib11 pci11: at device 0.0 (no driver attached) pci11: at device 0.2 (no driver attached) pcib12: numa-domain 0 on acpi0 pci12: numa-domain 0 on pcib12 pci12: at device 0.2 (no driver attached) pcib13: at device 1.1 numa-domain 0 on pci12 pci13: numa-domain 0 on pcib13 smartpqi0: port 0x4000-0x40ff mem 0x90400000-0x90407fff at device 0.0 numa-domain 0 on pci13 smartpqi0: using MSI-X interrupts (16 vectors) [ERROR]::[67:655.0][CPU 7][pqisrc_process_config_table][457]:unrecognized PQI config table section ID: 0x5 [WARN]:[67:655.0][CPU 7][pqisrc_add_device][1217]:vendor: HPE Smart Adapter model: Smart Adapter bus:0 target:67 lun:0 is_physical_device:0x1 expose_device:0x1 volume_offline 0x0 volume_status 0x0 [WARN]:[67:655.0][CPU 7][pqisrc_add_device][1217]:vendor: HPE LOGICAL VOLUME model: LOGICAL VOLUME bus:1 target:0 lun:0 is_physical_device:0x0 expose_device:0x1 volume_offline 0x0 volume_status 0x0 [WARN]:[67:655.0][CPU 7][pqisrc_add_device][1217]:vendor: HPE LOGICAL VOLUME model: LOGICAL VOLUME bus:1 target:1 lun:0 is_physical_device:0x0 expose_device:0x1 volume_offline 0x0 volume_status 0x0 [WARN]:[67:655.0][CPU 7][pqisrc_add_device][1217]:vendor: HPE P408i-a SR Gen10 model: P408i-a SR Gen10 bus:2 target:1088 lun:0 is_physical_device:0x0 expose_device:0x1 volume_offline 0x0 volume_status 0x0 pcib14: at device 1.2 numa-domain 0 on pci12 pci14: numa-domain 0 on pcib14 pcib15: at device 3.1 numa-domain 0 on pci12 pci15: numa-domain 0 on pcib15 pcib16: at device 7.1 numa-domain 0 on pci12 pci16: numa-domain 0 on pcib16 pci16: at device 0.0 (no driver attached) pci16: at device 0.2 (no driver attached) pcib17: at device 8.1 numa-domain 0 on pci12 pci17: numa-domain 0 on pcib17 pci17: at device 0.0 (no driver attached) pci17: at device 0.1 (no driver attached) pci17: at device 0.2 (no driver attached) xhci0: mem 0x90000000-0x900fffff at device 0.3 numa-domain 0 on pci17 xhci0: 64 bytes context size, 64-bit DMA xhci0: Unable to map MSI-X table usbus1 numa-domain 0 on xhci0 usbus1: 5.0Gbps Super Speed USB v3.0 pcib18: port 0xcf8-0xcff numa-domain 0 on acpi0 pci18: numa-domain 0 on pcib18 pci18: at device 0.2 (no driver attached) pcib19: at device 1.1 numa-domain 0 on pci18 pci19: numa-domain 0 on pcib19 pcib20: at device 3.1 numa-domain 0 on pci18 pci20: numa-domain 0 on pcib20 pcib21: at device 7.1 numa-domain 0 on pci18 pci21: numa-domain 0 on pcib21 pci21: at device 0.0 (no driver attached) pci21: at device 0.2 (no driver attached) pcib22: at device 8.1 numa-domain 0 on pci18 pci22: numa-domain 0 on pcib22 pci22: at device 0.0 (no driver attached) pci22: at device 0.2 (no driver attached) xhci1: mem 0xe1000000-0xe10fffff at device 0.3 numa-domain 0 on pci22 xhci1: 64 bytes context size, 64-bit DMA xhci1: Unable to map MSI-X table usbus2 numa-domain 0 on xhci1 usbus2: 5.0Gbps Super Speed USB v3.0 isab0: at device 20.3 numa-domain 0 on pci18 isa0: numa-domain 0 on isab0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 vga0: at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff pnpid PNP0900 on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. hwpstate0: numa-domain 0 on cpu0 Timecounters tick every 1.000 msec ugen1.1: <0x1022 XHCI root HUB> at usbus1 ugen0.1: <(0x103c) EHCI root HUB> at usbus0 ugen2.1: <0x1022 XHCI root HUB> at usbus2 uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 uhub1: <(0x103c) EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 uhub2: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 uhub0: 4 ports with 4 removable, self powered uhub2: 4 ports with 4 removable, self powered ugen1.2: at usbus1 uhub3 numa-domain 0 on uhub0 da1 at smartpqi0 bus 0 scbus0 target 1 lun 0 da1: Fixed Direct Access SPC-3 SCSI device da1: Serial Number PWDRE0DRHB600M da1: 1200.000MB/s transfers da1: Command Queueing enabled da1: 953837MB (1953459632 512 byte sectors) da0 at smartpqi0 bus 0 scbus0 target 0 lun 0 da0: Fixed Direct Access SPC-3 SCSI device da0: Serial Number PWDRE0DRHB600M da0: 1200.000MB/s transfers da0: Command Queueing enabled da0: 286070MB (585871964 512 byte sectors) uhub3: on usbus1 uhub3: MTT enabled ses0 at smartpqi0 bus 0 scbus0 target 67 lun 0 ses0: Fixed Enclosure Services SPC-3 SCSI device ses0: Serial Number PWDRE0DRHB600M ses0: 1200.000MB/s transfers ses0: SCSI-3 ENC Device ugen2.2: at usbus2 pass3 at smartpqi0 bus 0 scbus0 target 1088 lun 0 pass3: Fixed Storage Array SPC-3 SCSI device pass3: Serial Number PWDRE0DRHB600M pass3: 1200.000MB/s transfers pass3: Command Queueing enabled uhub4 numa-domain 0 on uhub2 uhub4: on usbus2 uhub4: MTT enabled Trying to mount root from ufs:/dev/da0p2 [rw]... uhub3: 3 ports with 2 removable, self powered uhub4: 5 ports with 4 removable, self powered ugen1.3: at usbus1 ugen2.3: at usbus2 uhub5 numa-domain 0 on uhub4 uhub5: on usbus2 lo0: link state changed to UP bge0: link state changed to DOWN ugen1.4: at usbus1 uhub6 numa-domain 0 on uhub0 uhub6: on usbus1 uhub5: 2 ports with 1 removable, self powered uhub1: 8 ports with 8 removable, self powered uhub6: 3 ports with 2 removable, self powered ugen2.4: at usbus2 ukbd0 numa-domain 0 on uhub4 ukbd0: on usbus2 kbd2 at ukbd0 ugen0.2: at usbus0 ukbd1 numa-domain 0 on uhub1 ukbd1: on usbus0 kbd3 at ukbd1 ugen2.5: at usbus2 bge0: link state changed to UP ugen2.6: at usbus2 uhub7 numa-domain 0 on uhub2 uhub7: on usbus2 ugen0.3: at usbus0 uhub_explore: illegal enable change, port 1 uhub_explore: illegal enable change, port 4 uhub7: 5 ports with 4 removable, self powered intsmb0: at device 20.0 numa-domain 0 on pci18 smbus0: numa-domain 0 on intsmb0 ums0 numa-domain 0 on uhub1 ums0: on usbus0 ums0: 3 buttons and [Z] coordinates ID=0