Jump to content 日本-日本語
製品  >  ソフトウェア  >  Linux

NSR M2402の設定方法

Open Source & Linux

導入事例

product

ハードウェア
ソフトウェア
サービス & サポート

buy now?

HPE OPEN SERVICES
保守サービス
教育プログラム

support

OS対応表
ProLiant
Workstation
システム構成図
技術文書
FAQ
ディストリ対応表
サポート & ドライバ
リンク
SDR - 設定方法
FreeBSD
サイトマップ
HPE & Red Hat情報ポータル HPEとRed Hatが実現するオープンなイノベーション
BSD 動作確認レポート等を掲載
コンテンツに進む
11-MAR-04, revised 12-SEP-06

本機の設定方法

visual manager visual manager

 本機の設定では WEB経由での Visual Managerもしくはシリアル経由でのコンフィギュレーションメニューを利用して行います。詳細は、製品に添付されているユーザーガイドをご覧ください。

 Linux環境で利用する場合、Current Default Mapの設定を 'Indexed'から 'Auto Assigned'へ変更してください。Auto Assigned設定は、大規模 SAN環境では NSRの立ち上げに時間が掛かる場合があります。

 以下はシリアル経由でのコンフィギュレーションメニューを利用した場合の設定例です。
 Compaq StorageWorks Modular Router
4.02.aw A00YBB 262653-B21_K574CE0R6N603I

1) Perform Configuration
2) System Utilities
3) Display Trace and Assertion History
4) Reboot
5) Download a New Revision of The Firmware

Command > 1


Configuration Menu
4.02.aw A00YBB 262653-B21_K574CE0R6N603I

1) Baud Rate Configuration
2) Ethernet and SNMP Configuration
3) World Wide Node Name Configuration
4) Modules Configuration
5) Trace and Event Settings Configuration
6) Real-Time Clock Configuration
7) Active Fabric Configuration 
8) Power Supply Configuration

A) Save Configuration
B) Restore Last Saved Configuration
C) Reset and Save Configuration to Factory Defaults

X) Return to main menu

Command > 4


Modules Configuration Menu
4.02.aw A00YBB 262653-B21_K574CE0R6N603I



Module Configuration : Module 0


Protocol : FCP
Compatibility : PASSED ALL
Part/Serial Number : 262661-B21_P575AC0R6N606X
Hardware ID : A00YA5


1) Configure Module Settings
X) Return to previous Menu



Command, <enter> for next Module Settings > 1


Fibre Channel Configuration Menu
4.02.aw A00YBB 262653-B21_K574CE0R6N603I

Fibre Channel Configuration : Module 0, Port 0

Link Status: UP/FABRIC
Port Name: 0x100000E0 02020E9B
Port Mode: Auto Sense
Use Hard ALPA: No
Discovery Mode: Auto Discovery on Reboot Events
Buffered Tape Writes: Enabled, Queue Depth = 1
Current Default Map: 'Auto Assigned'
Performance: 1 GigaBit

1) Change Port Name High
2) Change Port Name Low
3) Change Port Settings
4) Toggle Discovery Mode
5) Change Tape Backup Settings
6) Change Map Settings
7) Change Override Settings
X) Return to previous menu

Command, <enter> for next FC Port > 6


Map Settings Configuration
4.02.aw A00YBB 262653-B21_K574CE0R6N603I

Map Settings Configuration : Module 0, Port 0

Current Default Map: 'Auto Assigned'

1) Change Default Map Value
2) Device Map Settings
X) Return to previous menu

Command > 1
Select default map(1=Indexed, 2=Auto Assigned, 3=SCC Map, X=Cancel > 2


Map Settings Configuration
4.02.aw A00YBB 262653-B21_K574CE0R6N603I

Map Settings Configuration : Module 0, Port 0

Current Default Map: 'Auto Assigned'

1) Change Default Map Value
2) Device Map Settings
X) Return to previous menu

Command > x


Fibre Channel Configuration Menu
4.02.aw A00YBB 262653-B21_K574CE0R6N603I

Fibre Channel Configuration : Module 0, Port 0

Link Status: UP/FABRIC
Port Name: 0x100000E0 02020E9B
Port Mode: Auto Sense
Use Hard ALPA: No
Discovery Mode: Auto Discovery on Reboot Events
Buffered Tape Writes: Enabled, Queue Depth = 1
Current Default Map: 'Auto Assigned'
Performance: 1 GigaBit

1) Change Port Name High
2) Change Port Name Low
3) Change Port Settings
4) Toggle Discovery Mode
5) Change Tape Backup Settings
6) Change Map Settings
7) Change Override Settings
X) Return to previous menu

Command, <enter> for next FC Port > x



Modules Configuration Menu
4.02.aw A00YBB 262653-B21_K574CE0R6N603I



Module Configuration : Module 0


Protocol : FCP
Compatibility : PASSED ALL
Part/Serial Number : 262661-B21_P575AC0R6N606X
Hardware ID : A00YA5


1) Configure Module Settings
X) Return to previous Menu



Command, <enter> for next Module Settings > x


Configuration Menu
4.02.aw A00YBB 262653-B21_K574CE0R6N603I

1) Baud Rate Configuration
2) Ethernet and SNMP Configuration
3) World Wide Node Name Configuration
4) Modules Configuration
5) Trace and Event Settings Configuration
6) Real-Time Clock Configuration
7) Active Fabric Configuration 
8) Power Supply Configuration

A) Save Configuration
B) Restore Last Saved Configuration
C) Reset and Save Configuration to Factory Defaults

X) Return to main menu

Command > x
The configuration has changed and you have not saved the new 
configuration to flash. The configuration must be saved to 
flash for it to take effect on the next reboot!
Save the configuration now (y/n)? y


Saving Configuration, Please Wait...

Compaq StorageWorks Modular Router
4.02.aw A00YBB 262653-B21_K574CE0R6N603I

1) Perform Configuration
2) System Utilities
3) Display Trace and Assertion History
4) Reboot
5) Download a New Revision of The Firmware

Command > 4

Reboot! Are you sure (y/n)? y


M2402の初期設定では、ポート速度は 1Gbです。2Gbの SANスイッチへ接続する場合、ポート速度を 2Gbに変更してください。 以下はシリアル経由でのコンフィギュレーションメニューを利用した場合の設定例です。
 Compaq StorageWorks Modular Router
4.02.aw A00YBB 262653-B21_K574CE0R6N603I

1) Perform Configuration
2) System Utilities
3) Display Trace and Assertion History
4) Reboot
5) Download a New Revision of The Firmware

Command > 1


Configuration Menu
4.02.aw A00YBB 262653-B21_K574CE0R6N603I

1) Baud Rate Configuration
2) Ethernet and SNMP Configuration
3) World Wide Node Name Configuration
4) Modules Configuration
5) Trace and Event Settings Configuration
6) Real-Time Clock Configuration
7) Active Fabric Configuration
8) Power Supply Configuration

A) Save Configuration
B) Restore Last Saved Configuration
C) Reset and Save Configuration to Factory Defaults

X) Return to main menu

Command > 4


Modules Configuration Menu
4.02.aw A00YBB 262653-B21_K574CE0R6N603I

Module Configuration : Module 0


Protocol : FCP
Compatibility : PASSED ALL
Part/Serial Number : 262661-B21_P575AC0R6N606X
Hardware ID : A00YA5


1) Configure Module Settings
X) Return to previous Menu

Command, <enter> for next Module Settings > 1


Fibre Channel Configuration Menu
4.02.aw A00YBB 262653-B21_K574CE0R6N603I

Fibre Channel Configuration : Module 0, Port 0

Link Status: UP/FABRIC
Port Name: 0x100000E0 02020E9B
Port Mode: Auto Sense
Use Hard ALPA: No
Discovery Mode: Manual Discovery Only
Buffered Tape Writes: Enabled, Queue Depth = 1
Current Default Map: 'Auto Assigned'
Performance: 1 GigaBit

1) Change Port Name High
2) Change Port Name Low
3) Change Port Settings
4) Toggle Discovery Mode
5) Change Tape Backup Settings
6) Change Map Settings
7) Change Override Settings
X) Return to previous menu

Command, <enter> for next FC Port > 3


Fibre Channel Negotiation Settings Menu
4.02.aw A00YBB 262653-B21_K574CE0R6N603I

Fibre Channel Configuration : Module 0, Port 0

Performance : 1 Gigabit
Mode : Auto Sense
Use Hard ALPA : No


1) Toggle Performance Mode
2) Toggle Port Mode
3) Toggle Hard AL_PA Usage
4) Change AL_PA Value
X) Return to previous menu

Command > 1


Fibre Channel Negotiation Settings Menu
4.02.aw A00YBB 262653-B21_K574CE0R6N603I

Fibre Channel Configuration : Module 0, Port 0

Performance : 2 Gigabit
Mode : Auto Sense
Use Hard ALPA : No


1) Toggle Performance Mode
2) Toggle Port Mode
3) Toggle Hard AL_PA Usage
4) Change AL_PA Value
X) Return to previous menu

Command > x


Fibre Channel Configuration Menu
4.02.aw A00YBB 262653-B21_K574CE0R6N603I

Fibre Channel Configuration : Module 0, Port 0

Link Status: UP/FABRIC
Port Name: 0x100000E0 02020E9B
Port Mode: Auto Sense
Use Hard ALPA: No
Discovery Mode: Manual Discovery Only
Buffered Tape Writes: Enabled, Queue Depth = 1
Current Default Map: 'Auto Assigned'
Performance: 2 GigaBit

1) Change Port Name High
2) Change Port Name Low
3) Change Port Settings
4) Toggle Discovery Mode
5) Change Tape Backup Settings
6) Change Map Settings
7) Change Override Settings
X) Return to previous menu

Command, <enter> for next FC Port > x


Modules Configuration Menu
4.02.aw A00YBB 262653-B21_K574CE0R6N603I

Module Configuration : Module 0


Protocol : FCP
Compatibility : PASSED ALL
Part/Serial Number : 262661-B21_P575AC0R6N606X
Hardware ID : A00YA5


1) Configure Module Settings
X) Return to previous Menu

Command, <enter> for next Module Settings > x


Configuration Menu
4.02.aw A00YBB 262653-B21_K574CE0R6N603I

1) Baud Rate Configuration
2) Ethernet and SNMP Configuration
3) World Wide Node Name Configuration
4) Modules Configuration
5) Trace and Event Settings Configuration
6) Real-Time Clock Configuration
7) Active Fabric Configuration
8) Power Supply Configuration

A) Save Configuration
B) Restore Last Saved Configuration
C) Reset and Save Configuration to Factory Defaults

X) Return to main menu

Command > x
The configuration has changed and you have not saved the new
configuration to flash. The configuration must be saved to
flash for it to take effect on the next reboot!
Save the configuration now (y/n)? y


Compaq StorageWorks Modular Router
4.02.aw A00YBB 262653-B21_K574CE0R6N603I

1) Perform Configuration
2) System Utilities
3) Display Trace and Assertion History
4) Reboot
5) Download a New Revision of The Firmware

Command > 4

Reboot! Are you sure (y/n)? y

Linux側での設定方法

 /etc/modules.confoptions scsi_mod max_scsi_luns=255(kernel 2.6の場合のオプション指定は max_luns=)を追加し、#mkinitrdを行い起動環境の変更を行ってください。
印刷用画面へ印刷用画面へ
プライバシー ご利用条件・免責事項