==== システム起動時 ====
localhost kernel: megaide: 2.26j-1
localhost kernel: megaide: bios version 02.05.03181648
localhost kernel: megaide: LD 0 RAID1 status=ONLINE sectors=78161263 capacity=38164 MB drives=2
localhost kernel: scsi0 : LSI Logic MegaIDE RAID BIOS Version 2.5.03181648, 4 targs 1 chans 4 luns
localhost kernel:   Vendor: LSILOGIC  Model:  LD  0  IDERAID   Rev:
localhost kernel:   Type:   Direct-Access                      ANSI SCSI revision: 02
localhost kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
localhost kernel: SCSI device sda: 78161263 512-byte hdwr sectors (40019 MB)
localhost kernel:  sda: sda1 sda2



==== HDD障害時 ====
localhost kernel: scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Write (10) 00 00 04 01 bd 00 00 40 00
localhost kernel: megaide: snooze and wait for reset
localhost kernel: scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Write (10) 00 00 04 01 fd 00 00 38 00
localhost kernel: megaide: snooze and wait for reset
localhost kernel: scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Write (10) 00 00 23 30 3d 00 00 08 00
localhost kernel: megaide: snooze and wait for reset
localhost kernel: scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Write (10) 00 00 4f 30 15 00 00 08 00
localhost kernel: megaide: snooze and wait for reset
localhost kernel: scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Write (10) 00 00 53 30 1d 00 00 08 00
localhost kernel: megaide: snooze and wait for reset
localhost kernel: scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Write (10) 00 00 73 30 0d 00 00 08 00
localhost kernel: megaide: snooze and wait for reset
localhost kernel: scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Write (10) 00 00 23 2f fd 00 00 08 00
localhost kernel: megaide: snooze and wait for reset
localhost kernel: scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Write (10) 00 00 23 30 15 00 00 08 00
localhost kernel: megaide: snooze and wait for reset
localhost kernel: scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Write (10) 00 00 04 01 bd 00 00 40 00
localhost kernel: megaide: snooze and wait for reset
localhost kernel: SCSI host 0 abort (pid 0) timed out - resetting
localhost kernel: SCSI bus is being reset for host 0 channel 0.



==== HDD障害後の再起動後 ====
localhost kernel: megaide: 2.26j-1
localhost kernel: megaide: bios version 02.05.03181648
localhost kernel: megaide: LD 0 RAID1 status=DEGRADED sectors=78161263 capacity=38164 MB drives=2
localhost kernel: scsi0 : LSI Logic MegaIDE RAID BIOS Version 2.5.03181648, 4 targs 1 chans 4 luns
localhost kernel:   Vendor: LSILOGIC  Model:  LD  0  IDERAID   Rev:
localhost kernel:   Type:   Direct-Access                      ANSI SCSI revision: 02
localhost kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
localhost kernel: SCSI device sda: 78161263 512-byte hdwr sectors (40019 MB)
localhost kernel:  sda: sda1 sda2