Installation started at Sun Jun 8 14:17:13 2003 ******************************************************************************************* This installation of the Proliant Linux Support Paq will use the ./bp000071.xml bundle file. The ProLiant Support Pack for Red Hat Advanced Server 2.1 v6.30 installation is now in progress. ******************************************************************************************* Parsing of XML file for component ucd-snmp-4.2.5-7cmaX.75.Redhat-AS-2-1.i386.rpm was SUCCESSFUL. Parsing of XML file for component hpasm-6.30.0-12.Redhat-AS-2-1.i386.rpm was SUCCESSFUL. Parsing of XML file for component hprsm-6.30.0-9.Redhat-AS-2-1.i386.rpm was SUCCESSFUL. Parsing of XML file for component cpq_cciss_RedHatAS21-2.4.44-1.i386.rpm was SUCCESSFUL. Parsing of XML file for component cpq_cpqarray_RedHatAS21-2.4.25-1.i386.rpm was SUCCESSFUL. Parsing of XML file for component cpq_cpqfc_RedHatAS21-2.1.2-3.i386.rpm was SUCCESSFUL. Parsing of XML file for component cpqacuxe-6.30-11.0.i386.rpm was SUCCESSFUL. Parsing of XML file for component e100-2.1.29b-1.src.rpm was SUCCESSFUL. Parsing of XML file for component e1000-4.4.19c-1.src.rpm was SUCCESSFUL. Parsing of XML file for component bcm5700-6.0.2a-1.src.rpm was SUCCESSFUL. Parsing of XML file for component cmanic-6.30.0-4.i686.rpm was SUCCESSFUL. Parsing of XML file for component cmastor-6.30.0-9.i386.rpm was SUCCESSFUL. Parsing of XML file for component lsi-megaide-drvr-rhas21-2.26e-1.i386.rpm was SUCCESSFUL. The Deployment Utility found 13 components to install Preparing to install A Collection of SNMP Protocol Tools from UC-Davis for Red Hat Advanced Server 2.1 v4.2.5-7cmaX.75 SNMP (Simple Network Management Protocol) is a protocol used for network management. The UCD-SNMP project includes various SNMP tools: an extensible agent, an SNMP library, tools for requesting or setting information from SNMP agents, tools for generating and handling SNMP traps, a version of the netstat command which uses SNMP, and a Tk/Perl mib browser. This package contains the snmpd and snmptrapd daemons, documentation, etc. Preparing... ################################################## ucd-snmp ################################################## Installation of this component was SUCCESSFUL. Preparing to install hp Server Management Drivers and Agents for Red Hat Linux Advanced Server 2.1 v6.30.0-12 This RPM is used to provide server management capabilities for Red Hat Linux Advanced Server 2.1 installed on supported server systems. Please read the Licence Agreement for this software at /opt/compaq/hpasm/hpasm.license By Not removing this package, you are accepting the terms of the "License for HP Value Added Software". ============================================================================== NOTE: New snmpd.conf entries were added to the top of /etc/snmp/snmpd.conf ============================================================================== HP HTTP server's passwords were all set to compaq, unless otherwise specified through environment variables. Default passwords should be reset at your earliest convenience, since they pose a security risk. HP HTTP server's "administrator" password had been set successfully. HP HTTP server's "operator" password had been set successfully. HP HTTP server's "user" password had been set successfully. Following environment variables were used to configure snmpd/agents: CMALOCALHOSTRWCOMMSTR CMAMGMTSTATIONIPORDNS CMAMGMTSTATIONRWCOMMSTR CMADEFTRAPCOMMSTR CMATRAPDESTINATIONIPORDNS CMATRAPDESTINATIONCOMMSTR CMASYSCONTACT CMASYSLOCATION HPHTTPSERVERADMINPASSWD HPHTTPSERVEROPERATORPASSWD HPHTTPSERVERUSERPASSWD Starting HP Server Management Drivers and Agents, please wait ... cevtd: hp ProLiant Event Logging daemon started . . . casmd: hp ProLiant Advanced Server Management Monitoring . . . The hpasm RPM has installed successfully. Installation of this component was SUCCESSFUL. Preparing to install hp Lights-Out Drivers and Agents for Red Hat Linux Advanced Server 2.1 v6.30.0-9 This RPM is used to provide Lights-Out management capabilities for Red Hat Linux Advanced Server 2.1 installed on supported server systems. Installation of this component was SUCCESSFUL. Preparing to install ProLiant Linux driver for Smart Array 5i, 5300 Series controllers for Red Hat Advanced Server 2.1 v2.4.44-1 This RPM is used to provide binary driver modules that have been pre-built for Red Hat Linux Advanced Server to enable ProLiant Smart Array 53xx and Smart Array 5i controllers. This RPM provides a customer friendly approach to install a pre-built binary drivers. This component contains the same version as what is currently installed. Installation of this component is NOT REQUIRED. Preparing to install ProLiant Linux driver for the Smart Array 2xx, 3xxx and 42xx family of controllers for Red Hat Linux Advanced Server 2.1 v2.4.25-1 This RPM is used to provide binary driver modules that have been pre-built for Red Hat Linux Advanced Server 2.1 to enable Compaq Smart Array controllers. This RPM provides a customer friendly approach to install a pre-built binary drivers. No PCI adapters supported by this component were found. Installation of this component is NOT REQUIRED. Preparing to install Linux driver for Compaq's 64-bit/66MHz Fibre Channel Host Adapter for Red Hat Linux Advanced Server 2.1 v2.1.2-3 This RPM is used to provide binary driver modules that have been pre-built for Red Hat Linux Advanced Server 2.1 to enable Compaq's 64-bit/66-Mhz Fibre Channel Host Adapters. This RPM provides a customer friendly approach to install a pre-built binary drivers. This component contains the same version as what is currently installed. Installation of this component is NOT REQUIRED. Preparing to install hp Array Configuration Utility for Linux v6.30-11.0 The HP Array Configuration Utility is the web-based disk configuration utility for HP array controllers. Installation of this component was SUCCESSFUL. Preparing to install hp Tested and Approved e100 Linux NIC Driver v2.1.29b-1 This RPM contains the HP Tested and Approved e100 Linux NIC driver. No PCI adapters supported by this component were found. Installation of this component is NOT REQUIRED. Preparing to install hp Tested and Approved e1000 Linux NIC Driver v4.4.19c-1 This RPM package contains the HP Tested and Approved e1000 Linux NIC Driver. No PCI adapters supported by this component were found. Installation of this component is NOT REQUIRED. Preparing to install hp Tested and Approved bcm5700 Linux NIC Driver v6.0.2a-1 This RPM contains the HP Tested and Approved bcm5700 Linux NIC driver for use with the bcm5700 network devices. The version of kernel currently running 2.4.9-e.3smp does not meet the minimum component requirement of kernel version 2.4.9-8 Installation of this component FAILED. Preparing to install NIC Agents for Linux v6.30.0-4 This RPM contains the Compaq Network Interface Card (NIC) Simple Network Management Protocol (SNMP) Agents for Linux. Installation of this component was SUCCESSFUL. Preparing to install Compaq Storage Agents for Linux v6.30.0-9 This RPM contains the Compaq Storage Agents for Linux. Installation of this component was SUCCESSFUL. Preparing to install hp ProLiant Integrated Ultra ATA-100 Dual Channel Driver For Red Hat Linux Advanced Server 2.1 v2.26e-1 This component provides an updated driver for the Integrated Ultra ATA-100 Dual Channel Driver. No PCI adapters supported by this component were found. Installation of this component is NOT REQUIRED. ******************************************************************************************* Proliant Support Pack installation has completed. ******************************************************************************************* Installation started at Sun Jun 8 15:23:34 2003 ******************************************************************************************* This installation of the Proliant Linux Support Paq will use the ./bp000071.xml bundle file. The ProLiant Support Pack for Red Hat Advanced Server 2.1 v6.30 installation is now in progress. ******************************************************************************************* Parsing of XML file for component ucd-snmp-4.2.5-7cmaX.75.Redhat-AS-2-1.i386.rpm was SUCCESSFUL. Parsing of XML file for component hpasm-6.30.0-12.Redhat-AS-2-1.i386.rpm was SUCCESSFUL. Parsing of XML file for component hprsm-6.30.0-9.Redhat-AS-2-1.i386.rpm was SUCCESSFUL. Parsing of XML file for component cpq_cciss_RedHatAS21-2.4.44-1.i386.rpm was SUCCESSFUL. Parsing of XML file for component cpq_cpqarray_RedHatAS21-2.4.25-1.i386.rpm was SUCCESSFUL. Parsing of XML file for component cpq_cpqfc_RedHatAS21-2.1.2-3.i386.rpm was SUCCESSFUL. Parsing of XML file for component cpqacuxe-6.30-11.0.i386.rpm was SUCCESSFUL. Parsing of XML file for component e100-2.1.29b-1.src.rpm was SUCCESSFUL. Parsing of XML file for component e1000-4.4.19c-1.src.rpm was SUCCESSFUL. Parsing of XML file for component bcm5700-6.0.2a-1.src.rpm was SUCCESSFUL. Parsing of XML file for component cmanic-6.30.0-4.i686.rpm was SUCCESSFUL. Parsing of XML file for component cmastor-6.30.0-9.i386.rpm was SUCCESSFUL. Parsing of XML file for component lsi-megaide-drvr-rhas21-2.26e-1.i386.rpm was SUCCESSFUL. The Deployment Utility found 13 components to install Preparing to install A Collection of SNMP Protocol Tools from UC-Davis for Red Hat Advanced Server 2.1 v4.2.5-7cmaX.75 SNMP (Simple Network Management Protocol) is a protocol used for network management. The UCD-SNMP project includes various SNMP tools: an extensible agent, an SNMP library, tools for requesting or setting information from SNMP agents, tools for generating and handling SNMP traps, a version of the netstat command which uses SNMP, and a Tk/Perl mib browser. This package contains the snmpd and snmptrapd daemons, documentation, etc. Preparing... ################################################## ucd-snmp ################################################## Installation of this component was SUCCESSFUL. Preparing to install hp Server Management Drivers and Agents for Red Hat Linux Advanced Server 2.1 v6.30.0-12 This RPM is used to provide server management capabilities for Red Hat Linux Advanced Server 2.1 installed on supported server systems. Installation started at Sun Jun 8 16:01:03 2003 ******************************************************************************************* This installation of the Proliant Linux Support Paq will use the ./bp000071.xml bundle file. The ProLiant Support Pack for Red Hat Advanced Server 2.1 v6.30 installation is now in progress. ******************************************************************************************* Parsing of XML file for component ucd-snmp-4.2.5-7cmaX.75.Redhat-AS-2-1.i386.rpm was SUCCESSFUL. Parsing of XML file for component hpasm-6.30.0-12.Redhat-AS-2-1.i386.rpm was SUCCESSFUL. Parsing of XML file for component hprsm-6.30.0-9.Redhat-AS-2-1.i386.rpm was SUCCESSFUL. Parsing of XML file for component cpq_cciss_RedHatAS21-2.4.44-1.i386.rpm was SUCCESSFUL. Parsing of XML file for component cpq_cpqarray_RedHatAS21-2.4.25-1.i386.rpm was SUCCESSFUL. Parsing of XML file for component cpq_cpqfc_RedHatAS21-2.1.2-3.i386.rpm was SUCCESSFUL. Parsing of XML file for component cpqacuxe-6.30-11.0.i386.rpm was SUCCESSFUL. Parsing of XML file for component e100-2.1.29b-1.src.rpm was SUCCESSFUL. Parsing of XML file for component e1000-4.4.19c-1.src.rpm was SUCCESSFUL. Parsing of XML file for component bcm5700-6.0.2a-1.src.rpm was SUCCESSFUL. Parsing of XML file for component cmanic-6.30.0-4.i686.rpm was SUCCESSFUL. Parsing of XML file for component cmastor-6.30.0-9.i386.rpm was SUCCESSFUL. Parsing of XML file for component lsi-megaide-drvr-rhas21-2.26e-1.i386.rpm was SUCCESSFUL.