SOFTPAQ NUMBER: N/A PART NUMBER: N/A FILE NAME: mptlinux-2.06.24-6.sles8.i586.dd.gz TITLE: Driver Diskette for HP U320 SCSI Adapter and SAS HBA with RAID for SUSE LINUX Enterprise Server 8 (x86) VERSION: 2.06.24-6 KEY FILE: LANGUAGE: English CATEGORY: Software - Driver Diskettes DIVISION: N/A OPERATING SYSTEM: UnitedLinux 1.0/SUSE LINUX Enterprise Server 8 PREREQUISITES: N/A EFFECTIVE DATE: Mar 15, 2006 ELECTRONIC DISTRIBUTION ALLOWED: YES SOFTPAQ UTILITY VERSION: N/A SUPERSEDES: N/A SUPPORT SYSTEMS/DEVICES: DL145 - G2 BL35p - All Models DL760 - G2 DL760 - (700-900MHz) DL740 - All Models DL585 - All Models DL580 - G2 DL560 - All Models DL385 - All Models DL380 - G4 DL380 - G3 DL380 - G2 DL360 - G4 / G4p DL360 - G3 DL360 - G2 DL320 - G3 DL320 - G2 DL320 - (800-1.5GHz) DL145 - (1.6GHz+) DL140 - G2 ML750 - All Models ML570 - G2 ML530 - G2 ML370 - G4 ML370 - G3 ML350 - G4 / G4p ML350 - G3 ML330 - G3 ML330 - G2 ML310 - G2 ML310 - (2.0-2.2GHz) ML110 - (2.6-3.2GHz) HP 8 Internal Port SAS Host Bus Adapter with RAID HP U320 64bit Single Channel SCSI G2 Host Bus Adapter DESCRIPTION: ~~~~~~~~~~~~ This RPM is used to provide binary driver modules that have been pre-built for your Linux Distribution to enable the HP ProLiant 64-bit/133-MHz Dual Channel Ultra320 SCSI HBA and HP U320 64-Bit Single Channel SCSI G2 HBA, HP U320 64-Bit Single Channel SCSI HBA, HP 8 Internal Port SAS/SATA HBA with RAID and HP 4 Internal Port SAS HBA with RAID. This RPM provides a customer friendly approach to install a pre-built binary driver. FIXES: ~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ ENHANCEMENTS: ~~~~~~~~~~~~~ Added support for new errata kernels The kernels of SUSE LINUX Enterprise Server 8 supported by this driver diskette are: 2.4.21-278 - SUSE LINUX Enterprise Server 8 SP 4 (x86) CREATING A DRIVER DISKETTE -------------------------- There are two methods to create the Installation Diskette: MAKING A DISKETTE UNDER MS-DOS: ------------------------------- Save the "mptlinux-{version}-(release).sles8.i586.dd.gz" file into a temporary directory. Use WINZIP to extract "mptlinux-{version}-(release).sles8.i586.dd" from this file into the same directory. Please ensure that "mptlinux-{version}-(release).sles8.i586.dd" is a DOS 8.3 name. Label a blank, formatted 3.5-inch diskette as "HP U320 SCSI Adapter and SAS HBA with RAID Driver Diskette". Next, insert the diskette in the diskette drive. Then, use the following commands (assuming your ProLiant Disk Image is at the location c: and your CD-ROM is drive d:) C:\> d:\dosutils\rawrite Enter disk image source file name: mptlinux-{version}-(release).sles8.i586.dd Enter target diskette drive: a: Please insert a formatted diskette into drive A: and press --ENTER-- : Enter Note: The "rawrite" utility can usually be on the first CD of the installation media. MAKING A DISKETTE UNDER A LINUX-LIKE OS: ---------------------------------------- Save the "mptlinux-{version}-(release).sles8.i586.dd.gz" file into a temporary directory. Use GUNZIP to extract "mptlinux-{version}-(release).sles8.i586.dd" from this file into the same directory. To make a diskette under Linux (or any other Linux-like operating system), you must have permission to write to the device representing a 3.5-inch diskette drive (known as /dev/fd0 under Linux). First, label a blank, formatted diskette appropriately (HP U320 SCSI Adapter and SAS HBA with RAID Driver Diskette). Insert the diskette into the floppy drive, but DO NOT issue the mount command: # dd if=mptlinux-{version}-(release).sles8.i586.dd of=/dev/fd0 bs=1440k This command creates a diskette containing the image of the input file (Driver Diskette image) to an output file (Floppy Diskette). To make another diskette run the same "dd" command again. INSTALLATION ------------ To install Linux using this " HP U320 SCSI Adapter and SAS HBA with RAID Driver Diskette", boot your Linux machine with your Linux Distribution's CD1 in your CD-ROM Drive. At the splash screen press the left key to use the driver diskette. Your Linux Distribution will prompt for the " HP U320 SCSI Adapter and SAS HBA with RAID Driver Diskette" during the installation procedure. CAUTION: If ProLiant Support Pack version 7.40 or older is installed, please install mptlinux-{version}-(release).sles8.i586.dd.gz prior to rebooting the system. Note: If HP System Insight Manager support is required, please install the mptlinux-{version}-(release).sles8.i586.dd.gz after the OS has completed its installation process and is successfully booting. Customer Service --------------------------------------------------- For support, please send email to contact.hp@hp.com Copyright 2006, Hewlett_Packard Development Company, L.P. Product names mentioned heren may be trademarks and/or registered trademarks of their respective companies.