ProLiant Support Pack for Red Hat Enterprise Linux 6 (i686) & (x86_64) version 9.00 -------------------------------------------------------------------------------- HP ProLiant Smart Array Controller (x86/AMD32) Driver for Red Hat Enterprise Linux 6 (x86) Version: 4.6.28-17 (Recommended) Related File: kmod-cciss-4.6.28-17.el6.i686.rpm kmod-cciss-4.6.28-17.el6.x86_64.rpm Enhancement Note: Support for new Smart Array Controllers. Each rpm supports errata kernels within that update. Support tape drive detection on boot without support scripts. Added support for Red Hat Enterprise Server 6 Update 2. -------------------------------------------------------------------------------- HP Smart Array B110i SATA RAID Controller Driver for Red Hat Enterprise Linux 6 (x86) Version: 1.2.6-12 (Recommended) Related File: kmod-hpahcisr-1.2.6-11.el6.i686.rpm kmod-hpahcisr-1.2.6-11.el6.x86_64.rpm Enhancement Note: Changed to KMP rpm packaging Each rpm supports errata kernels within that update Added Red Hat Enterprise 6 Update 2 support. -------------------------------------------------------------------------------- HP SAS2308 6GB 2x4 ports External PCIe SAS/SATA Host Bus Adapter (x86/AMD32) Driver for Red Hat Enterprise Linux 6 (x86) Version: 10.10.17.00-1 (Recommended) Related File: kmod-mpt2sas-10.10.17.00-1.rhel6u1.i686.rpm kmod-mpt2sas-10.10.17.00-1.rhel6u1.x86_64.rpm Enhancement Note: This is the initial release to support new controllers. Note: HP ProLiant Gen8 servers, running RHEL 6.2 with the HP H221 or H220i HBA can be installed with drivers using the RHEL 6.2 distribution. These drivers however, do not include ProLiant manageability features. A customer advisory will be available with the details on the availability of the HP driver. -------------------------------------------------------------------------------- HP ProLiant Smart Array Controller (x86/AMD32) Driver for Red Hat Enterprise Linux 6 (x86) Version: 3.0.0-4 (Recommended) Related File: kmod-hpsa-3.0.0-3.el6.i686.rpm kmod-hpsa-2.0.2-8.el6.x86_64.rpm Enhancement Note: Added support for Red Hat Enterprise Server 6 Update 2 Feature to allow tuning of max_sectors_kb for the hpsa driver. Adjust max_sectors_kb up to 4096 by echoing a new value into /sys/block//queue/max_sectors_kb. Support for new Smart Array Controllers -------------------------------------------------------------------------------- HP NC-Series Intel e1000 Driver for Linux Version: 8.0.25-1 (Optional) Related File: hp-e1000-8.0.25-1.src.rpm Fix Note: A KMP build of this rpm no longer fails on the SLES10 vmipae kernel. -------------------------------------------------------------------------------- HP Intel e1000e Driver for Linux Version: 1.6.2-1 (Optional) Related File: hp-e1000e-1.6.2-1.src.rpm Enhancement Note: This driver now supports Red Hat Enterprise Linux 5 Update 7. This driver now supports Red Hat Enterprise Linux 6 Update 2. -------------------------------------------------------------------------------- HP Broadcom TG3 Driver for Linux Version: 3.122g-2 (Optional) Related File: hp-tg3-3.122g-2.src.rpm Enhancement Note: This driver now supports new network adapters. This driver now supports Red Hat Enterprise Linux 6 Update 2. This driver now supports Red Hat Enterprise Linux 5 Update 7. This driver now supports SUSE Linux Enterprise Server 10 SP4. -------------------------------------------------------------------------------- HP Broadcom 1/10 GbE Multifunction Drivers for Linux Version: 7.0.36-2 (Optional) Related File: hp-netxtreme2-7.0.36-2.src.rpm Enhancement Note: This rpm no longer contains the iSCSI offload driver. That driver is now available in the HP Broadcom 1/10 GbE iSCSI Offload Driver for Linux rpm package. This driver now supports Red Hat Enterprise Linux 6 Update 2. This driver now supports Red Hat Enterprise Linux 5 Update 7. This driver now supports SUSE Linux Enterprise Server 10 SP4. This software now supports new network adapters. -------------------------------------------------------------------------------- HP Broadcom 1/10 GbE iSCSI Offload Driver for Linux Version: 7.0.36-2 (Optional) Related File: hp-netxtreme2-iscsi-7.0.36-2.src.rpm Enhancement Note: Initial release. -------------------------------------------------------------------------------- HP NC-Series QLogic nx_nic Driver for Linux Version: 4.0.579-2 (Optional) Related File: hp-nx_nic-4.0.579-2.src.rpm Fix Note: This driver corrects an issue which could result in the adapter losing connectivity and writing "TX path hung. Device being reset" to the system event log. This driver no longer fails to load on SLES10 when interfaces are configured with the GPL driver. This driver addresses an issue that caused a hang on some adapters. This driver must be installed only after upgrading to firmware version 4.0.555 or later. Enhancement Note: KMP build support has been added for Red Hat Enterprise Linux 6, Update 1. KMP build support has been added for Red Hat Enterprise Linux 5, Update 7. Jumbo frame support has been added for the HP NC375T PCI Express Quad Port Gigabit Server Adapter. -------------------------------------------------------------------------------- HP Intel igb Driver for Linux Version: 3.2.10-3 (Optional) Related File: hp-igb-3.2.10-3.src.rpm Enhancement Note: This driver now supports the HP Ethernet 1Gb 2-port 361i Adapter. This driver now supports Red Hat Enterprise Linux 5 Update 7. This driver now supports Red Hat Enterprise Linux 6 Update 2. -------------------------------------------------------------------------------- HP Emulex 10GbE Driver for Linux Version: 4.0.479.0-2 (Optional) Related File: hp-be2net-4.0.479.0-2.src.rpm Enhancement Note: This driver now supports Red Hat Enterprise Linux 6 Update 2. This software now supports new network adapters. -------------------------------------------------------------------------------- HP Emulex 10GbE iSCSI Driver for Linux Version: 4.0.480.0-2 (Optional) Related File: hp-be2iscsi-4.0.480.0-2.src.rpm Enhancement Note: This driver now supports Red Hat Enterprise Linux 6 Update 2. This software now supports new network adapters. -------------------------------------------------------------------------------- HP Mellanox 10GbE Driver for Linux Version: 1.5.5.7-14 (Optional) Related File: hp-mlnx-en-1.5.5.7-14.src.rpm Enhancement Note: This driver now supports Red Hat Enterprise Linux 5 Update 7. This driver now supports Red Hat Enterprise Linux 6 Update 2. -------------------------------------------------------------------------------- HP QLogic qlcnic Driver for Linux Version: 5.0.17.4-3 (Optional) Related File: hp-qlnic-5.0.17.4-3.src.rpm Enhancement Note: This driver now supports Red Hat Enterprise Linux 6 Update 2. -------------------------------------------------------------------------------- HP System Health Application and Command Line Utilities for Red Hat Enterprise Linux 6 (x86/AMD64/EM64T) Version: 9.0.0 (Optional) Related File: N/A Enhancement Note: Added support for Red Hat Enterprise Server 6 Update 2. -------------------------------------------------------------------------------- HP SNMP Agents for Red Hat Enterprise Linux 6 (x86/AMD64/EM64T) Version: 9.0.0 (Optional) Related File: N/A Fix Note: Fixed an issue where HP Insight Management Agents were not setting the Web Address URL launched by the HP Integrated Lights-Out web pages to view HP System Management Homepage of the server. Enhancement Note: Added support for: Matrix Identification for HP Bladesystem Matrix. System Management BIOS (SMBIOS) version 2.7.1. Solid State physical disk Smart SSDWear Gauge for Smart Array and SAS controllers. Physical drive authentication for Smart Array and SAS controllers. Provided a provision to accommodate HP Insight Management Agents sub-systems status in an array (MIB). It can be useful to find all the sub-systems status in a single MIB value. Enhanced hpsnmpconfig tool to configure HP Insight Management Agents using command line options. -------------------------------------------------------------------------------- HP System Management Homepage for Linux (x86/AMD64/EM64T) Version: 7.0.0-24 (Recommended) Related File: hpsmh-7.0.0-24.i386.rpm Fix Note: SMH improperly displayed an invalid certificate warning when restarted, even on a fresh install. Enhancement Note: Added the following features: A command line option to modify the local and state information in the SMH PKCS (Public-Key Cryptography Standards) data Secured handling of HTTP request and response Added support for the following browsers: Firefox 6.0, 7.0 & 8.0 Internet Explorer 9.0 Clarified the log messages Improved the handling of the following components: Command Line Interface options IP fields Memory resources Revoked trusted certificate SMH configuration file and settings Improved the CLI options, for easier management of SMH configurations Updated the HTTP links Updated the following elements: Apache to version 2.2.21 Curl library to version 7.21.7 OpenSSL to version 1.0.0e PHP to version 5.3.8 -------------------------------------------------------------------------------- HP System Management Homepage Templates for Linux Version: 9.0.0 (Optional) Related File: hp-smh-templates-9.0.0-%build.noarch Important Note: The HP System Health Application and Insight Management Agents (hpasm) version 8.0.0 was split into three individual rpm packages: HP System Health Application and Command Line Utilities (hp-health) version 8.1.0 HP SNMP Agents (hp-snmp-agents) version 8.1.0 HP System Management Homepage Templates (hp-smh-templates) version 8.1.0 These three packages provide equivalent functionality as hpasm v8.0.0 and allow for a more modular installation choices. Fix Note: Enhancement Note: Added support for Red Hat Enterprise Server 6 Update 2. -------------------------------------------------------------------------------- HP ProLiant Agentless Management Service for Red Hat Enterprise Linux 6 (x86/AMD64/EM64T) Version: 1.0.0 (Optional) Related File: N/A Enhancement Note: Initial release. -------------------------------------------------------------------------------- HP Version Control Agent for Linux Version: 7.0.0-12 (Recommended) Related File: hpvca-7.0.0-12.linux.rpm Important Note: Enable automatic update or Perform "Update from hp.com now" in Version Control Repository Manager to obtain the latest HP Smart Update Manager (HPSUM) or manually download Linux HPSUM from http://downloads.hpe.com/pub/softlib2/software1/sc-linux/p809864560/v71069/hpsum-5.0.0.scexe and place in repository folder of Version Control Repository Manager Version 6.1 and above. HPSUM is recommended for the deployment of software and firmware that are stored in the repository. Fix Note: Updated OpenSSL to recent and stable version 1.0.0e Includes bug fixes and security fixes. Improved component filter logic to download and deploy only applicable component from Software baseline or Service Pack for ProLiant. Enhancement Note: Added the following support: HP Service Pack for ProLiant (SPP) Set as Reference Support Pack Deploy from VCA home page and through HP SIM. Authenticate VCRM using SMH trusted servers certificates. -------------------------------------------------------------------------------- HP Array Configuration Utility for Linux Version: 9.0.24.0 (Optional) Related File: cpqacuxe-%product.version%.noarch.rpm Fix Note: Enhancement Note: Added support for new controllers. Added support for the following features/devices: Smart Array Advanced Pack 2.0 (SAAP 2.0) SAAP 2.0 provides full SAAP 1.0 feature functionality with the following additions: RAID 1/10 Advanced Data Mirroring (ADM) Moving and Deleting of Individual Logical Volumes Move operation now supports SATA to SAS, SAS to SATA Predictive Spare Activation > 128 physical drives SmartSSD Wear Gauge Updated Cache Ratio settings Additional Strip Sizes - 512, 1024 on supported controllers and configurations Device Temperatures - Controllers, Capacitors, Cache Modules, and Hard Drives Overall Performance improvements 3 TB physical drives -------------------------------------------------------------------------------- HP Array Configuration Utility CLI for Linux Version: 9.0.24.0 (Optional) Related File: hpacucli-%product.version%.noarch.rpm Enhancement Note: Added support for new controllers. Added support for the following features/devices: Smart Array Advanced Pack 2.0 (SAAP 2.0) SAAP 2.0 provides full SAAP 1.0 feature functionality with the following additions: RAID 1/10 Advanced Data Mirroring (ADM) Moving and Deleting of Individual Logical Volumes Move operation now supports SATA to SAS, SAS to SATA Predictive Spare Activation > 128 physical drives SmartSSD Wear Gauge Updated Cache Ratio settings Additional Strip Sizes - 512, 1024 on supported controllers and configurations Device Temperatures - Controllers, Capacitors, Cache Modules, and Hard Drives Overall Performance improvements 3 TB physical drives -------------------------------------------------------------------------------- HP Fibre Channel Enablement Kit for Linux Version: 1.2-7 (Optional) Related File: hp-fc-enablement-1.2-7.noarch.rpm Enhancement Note: Added support for RHEL 6.2. -------------------------------------------------------------------------------- Fibreutils for HP Storage Fibre Channel Host Bus Adapters for Linux (x86) Version: 3.2-4 (Optional) Related File: fibreutils-3.2-4.i386.rpm fibreutils-3.2-4.x86_64.rpm Fix Note: - Fix for dependency check error seen when installing with HPSUM. -------------------------------------------------------------------------------- HP Lights-Out Online Configuration Utility for Linux Version: 4.0.0-0 (Optional) Related File: hponcfg-4.0.0-0.noarch.rpm Not yet available for RHEL 6.2. -------------------------------------------------------------------------------- HP Insight Diagnostics Online Edition for Linux (x86 32-bit) Version: 9.0.0-36 (Optional) Related File: hpdiags-%product.version%.linux.i586.rpm hpdiags-%product.version%.linux.x86_64.rpm Enhancement Note: Added support for new server products. See the contents of the Release Notes tab to view the list of new hardware support added in this version. --------------------------------------------------------------------------------