FILE NAME: kmod-hpsa-2.0.2-6.el6.x86_64.rpm TITLE: HP Proliant Smart Array Controller (x86_64) Driver for Red Hat Enterprise Linux 6 (AMD64/EM64T) VERSION: 2.0.2-6 LANGUAGE: English CATEGORY: Storage Controllers DIVISION: N/A OPERATING SYSTEM: Red Hat Enterprise Linux 6 (AMD64/EM64T) ELECTRONIC DISTRIBUTION ALLOWED: Yes DESCRIPTION: This RPM is used to provide binary driver modules that have been pre-built for Red Hat Enterprise Linux 6 to enable ProLiant Smart Array SAS/SATA, Px1x (ex. P410) Series controllers and newer. This RPM provides a customer friendly approach to install a pre-built binary driver. NOTE: On some kernel erratas the version of the driver present in the kernel may be equal to the version being installed by the rpm. However, the driver in the kernel may not include all of the fixes and enhancements implemented in the driver contained within the rpm. Therefore the rpm should be installed in order to obtain the fixes and enhancements that are not present in the kernel driver. FIXES * Tue Nov 30 2010 Linux Storage Driver Team 2.0.2-6 - Code update for RAID migration. * Tue Nov 23 2010 Linux Storage Driver Team 2.0.2-5 * Mon Nov 1 2010 Linux Storage Driver Team 2.0.2-4 * Wed Oct 27 2010 Linux Storage Driver Team 2.0.2-3 - Updates for kdump support. ENHANCEMENTS * Tue Nov 30 2010 Linux Storage Driver Team 2.0.2-6 * Tue Nov 23 2010 Linux Storage Driver Team 2.0.2-5 - Automatically trigger the kdump initrd to be rebuilt when hpsa rpm is installed. * Mon Nov 1 2010 Linux Storage Driver Team 2.0.2-4 - Added support for Red Hat Enterprise Linux 6. * Wed Oct 27 2010 Linux Storage Driver Team 2.0.2-3 SUPPORTED KERNELS: The kernels of Red Hat Enterprise Linux 6 (AMD64/EM64T) supported by this binary rpm are: 2.6.32-71.el6 - Red Hat Enterprise Linux 6 (AMD64/EM64T) and future update kernels SUPPORTED DEVICES AND FEATURES Smart Array P212 Controller Smart Array P410 Controller Smart Array P410i Controller Smart Array P411 Controller Smart Array P812 Controller Smart Array P712m Controller Smart Array P711m Controller StorageWorks P1210m Controller INSTALLATION Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory. To install or upgrade the driver type: # rpm -Uvh kmod-hpsa-2.0.2-6.el6.x86_64.rpm Setup is now complete. Please REBOOT your computer NOW!! NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command: # rpm -e kmod-hpsa-2.0.2-6.el6.x86_64 The removal of the RPM restores the system back to hpsa.ko module that is included in Red Hat Enterprise Linux 6. IMPORTANT: This KMOD RPM will install binary driver that supports Red Hat Enterprise Linux 6 and the errata kernels made available for this release. Once installed these drivers will be carried forward with each errata kernel upgrade using facilities included in Red Hat Enterprise Linux 6. This is a big improvement from previouse releases allowing the customer to not wait on driver updates when errata kernels are released. NOTES MD5SUM: e57209e6edbda492a90326b0e3df60e8 Feedback -------- To provide kernel/driver development feedback send email to iss_storagedev@hp.com Customer Service ---------------- For support for ProLiant Smart Array controllers, please visit http://welcome.hp.com/country/us/en/contact_us.html Copyright 2002-2010 Hewlett-Packard Development Company, L.P. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.