FILE NAME: kmod-hpahcisr-1.2.6-7.el6.x86_64.rpm TITLE: HP Smart Array B110i SATA RAID Controller (x86_64) Driver for Red Hat Enterprise Linux 6 (AMD64/EM64T) VERSION: 1.2.6-7 LANGUAGE: English CATEGORY: Storage Controllers DIVISION: N/A OPERATING SYSTEM: Red Hat Enterprise Linux 6 (AMD64/EM64T) ELECTRONIC DISTRIBUTION ALLOWED: Yes DESCRIPTION: This RPM is used to provide binary driver modules that have been pre-built for Red Hat Enterprise Linux 6 to enable software RAID for the embedded ICH10R controller (Smart Array B110i). This RPM provides a customer friendly approach to install a pre-built binary driver. FIXES * Thu Jan 20 2011 Linux Storage Driver Team 1.2.6-7 - Fix to better support the HP ACU utility in Diagnostic mode. * Thu Dec 16 2010 Linux Storage Driver Team 1.2.6-6 * Tue Dec 9 2010 Linux Storage Driver Team 1.2.6-5 - Improved physical drive serial number reporting accuracy. * Tue Nov 23 2010 Linux Storage Driver Team 1.2.6-4 - Added changelog information to rpm. * Mon Oct 25 2010 Linux Storage Driver Team 1.2.6-3 - Fixed an optical media support issue. * Thu Oct 7 2010 Linux Storage Driver Team 1.2.6-2 ENHANCEMENTS * Thu Jan 20 2011 Linux Storage Driver Team 1.2.6-7 * Thu Dec 16 2010 Linux Storage Driver Team 1.2.6-6 - Updated RAID firmware. * Tue Dec 9 2010 Linux Storage Driver Team 1.2.6-5 - Added more support for SMART data (smartmontools). * Tue Nov 23 2010 Linux Storage Driver Team 1.2.6-4 * Mon Oct 25 2010 Linux Storage Driver Team 1.2.6-3 * Thu Oct 7 2010 Linux Storage Driver Team 1.2.6-2 - Added better support for smartmontools. SUPPORTED KERNELS: The kernels of Red Hat Enterprise Linux 6 (AMD64/EM64T) supported by this binary rpm are: 2.6.32-71.el6 - Red Hat Enterprise Linux 6 (AMD64/EM64T) and future update kernels SUPPORTED DEVICES AND FEATURES Smart Array B110i Controller INSTALLATION Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory. To install or upgrade the driver type: # rpm -Uvh kmod-hpahcisr-1.2.6-7.el6.x86_64.rpm Setup is now complete. Please REBOOT your computer NOW!! NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command: # rpm -e kmod-hpahcisr-1.2.6-7.el6.x86_64 Since hpahcisr is not a part of Red Hat Enterprise Linux 6, the removal of the hpahcisr rpm will leave your system without a software RAID driver. Before rebooting, installation of a previous version of the hpahcisr driver rpm is needed to insure your system can reboot successfully. IMPORTANT: This KMOD RPM will install binary driver that supports Red Hat Enterprise Linux 6 and the errata kernels made available for this release. Once installed these drivers will be carried forward with each errata kernel upgrade using facilities included in Red Hat Enterprise Linux 6. This is a big improvement from previouse releases allowing the customer to not wait on driver updates when errata kernels are released. NOTES MD5SUM: 807a7b2009d528ea22ce92fca04fa52e Feedback -------- To provide kernel/driver development feedback send email to iss_storagedev@hp.com Customer Service ---------------- For support for ProLiant Smart Array controllers, please visit http://welcome.hp.com/country/us/en/contact_us.html Copyright 2002-2011 Hewlett-Packard Development Company, L.P. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.