ProLiant Support Pack for SUSE LINUX Enterprise Server 11 (i686) & (x86_64) Version 8.51 Added support for SUSE Enterprise Linux 11 SP1. NOTE: The “HP NC-Series Mellanox 10GbE Driver for LinuxEand “HP NC-Series Broadcom 1Gb and 10GbE Multifunction and iSCSI Drivers for LinuxEdrivers have been removed from this version of the HP ProLiant Support Pack for SUSE LINUX Enterprise Server 11. HP recommends using the drivers provided with the SUSE LINUX Enterprise Server 11 operating system. -------------------------------------------------------------------------------- INSTALLER -------------------------------------------------------------------------------- HP Smart Update Manager for Linux Version: 4.0.1 (Recommended) Related File: N/A Important Note: SUSE Enterprise Linux 11 Support To successfully run HP Smart Update Manager on any local or remote target systems running a SUSE Enterprise Linux 11 operating system on x86 or x64 architectures, the library, compat-libstdc++-296-2.96-132.7.2.i386.rpm or another compatibility library that provides the file, /usr/lib/libstdc++-libc6.2-2.so.3 must be installed. Without this library, HPSUM will not complete discovery and return "Discovery Failed" messages to the users. This file can be found in the latest HP PSP for Linux as part of the hppldu-librpms-.tar.gz file. Problems Fixed Fixed dependency checking for Linux RPMs. Completed support for input file functionality. -------------------------------------------------------------------------------- CONTENTS -------------------------------------------------------------------------------- HP ProLiant Smart Array Controller (x86/AMD32) Driver for SUSE LINUX Enterprise Server 11 (x86) HP ProLiant Smart Array Controller (AMD64/EM64T) Driver for SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Version: 4.6.24-5 (Optional) Related File: cpq_cciss-4.6.24-5.sles11.i586.rpm Related File: cpq_cciss-4.6.24-5.sles11.x86_64.rpm Fix Note: Set SCSI max cmd length to 16 to better support tape drive queries. Enhancement Note: Added SUSE Enterprise Linux 11 SP1 support -------------------------------------------------------------------------------- HP U320 SCSI Adapter, SAS HBA with RAID, SCxxXe and SCxxGe series HBA Driver (x86 and AMD32) for SUSE LINUX Enterprise Server 11 (x86) HP U320 SCSI Adapter, SAS HBA with RAID, SCxxXe and SCxxGe series HBA (AMD64/EM64T) Driver for SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Version: 4.00.13.08-3 (Optional) Related File: mptlinux-4.00.13.08-3.sles11.i586.rpm Related File: mptlinux-4.00.13.08-3.sles11.x86_64.rpm Enhancement Note: New support. -------------------------------------------------------------------------------- HP Smart Array B110i SATA RAID Controller Driver for SUSE LINUX Enterprise Server 11 (x86) HP Smart Array B110i SATA RAID Controller Driver for SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Version: 1.2.4-16 (Optional) Related File: hpahcisr-1.2.4-16.sles11.i586.rpm Related File: hpahcisr-1.2.4-16.sles11.x86_64.rpm Enhancement Note: Added latest errata support. -------------------------------------------------------------------------------- HP NC-Series Intel e1000 Driver for Linux Version: 8.0.19-1 (Optional) Related File: hp-e1000-8.0.19-1.src.rpm Enhancement Note: This rpm package now requires that the kernel-syms package be installed in order to build correctly. -------------------------------------------------------------------------------- HP NC-Series Intel e1000e Driver for Linux Version: 1.1.17-5 (Optional) Related File: hp-e1000e-1.1.17-5.src.rpm Enhancement Note: This rpm package now requires that the kernel-syms package be installed in order to build correctly. -------------------------------------------------------------------------------- HP NC-Series QLogic Driver for Linux Version: 4.0.526-2 (Optional) Related File: hp-nx_nic-4.0.526-2.src.rpm Enhancement Note: This package now provides the content of the binary RPM Tools Package for HP NC-Series QLogic Driver for Linux. A separate RPM is no longer needed nor provided. This rpm package now requires that the kernel-syms package be installed in order to build correctly. -------------------------------------------------------------------------------- HP NC-Series Broadcom TG3 Driver for Linux Version: 3.99p-9 (Optional) Related File: hp-tg3-3.99p-9.src.rpm Enhancement Note: This rpm package now requires that the kernel-syms package be installed in order to build correctly. -------------------------------------------------------------------------------- HP NC-Series Intel igb Driver for Linux Version: 2.2.9-2 (Optional) Related File: hp-igb-2.2.9-2.src.rpm Enhancement Note: This rpm package now requires that the kernel-syms package be installed in order to build correctly. -------------------------------------------------------------------------------- HP NC-Series Emulex 10GbE Driver for Linux Version: 2.102.266.4-1 (Optional) Related File: hp-be2net-2.102.266.4-1.src.rpm Enhancement Note: This driver now supports the following network adapters: HP NC551m Dual Port FlexFabric 10Gb Converged Network Adapter HP NC551i Dual Port FlexFabric 10Gb Network Adapter HP NC553i 10Gb 2-port FlexFabric Converged Network Adapter -------------------------------------------------------------------------------- HP NC-Series Emulex 10GbE iSCSI Driver for Linux Version: 2.102.266.4-1 (Optional) Related File: hp-be2iscsi-2.102.266.4-1.src.rpm Enhancement Note: This driver now supports the HP NC553i 10Gb 2-port FlexFabric Converged Network Adapter. -------------------------------------------------------------------------------- HP OpenIPMI Device Driver for SUSE LINUX Enterprise Server 11 (x86) HP OpenIPMI Device Driver for SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Version: 8.5.0-*.sles11 (Optional) Related File: hp-OpenIPMI-8.5.0-%build.version_subst%.sles11.i386.rpm Related File: hp-OpenIPMI-8.5.0-%build.version_subst%.sles11.x86_64.rpm Fix Note: Fixed rebuild compatibility with SUSE LINUX Enterprise Server Errata kernel versions. Enhancement Note: Avoid driver rebuild attempts when the distribution kernel is sufficient. -------------------------------------------------------------------------------- HP System Health Application and Command Line Utilities for SUSE LINUX Enterprise Server 11 (x86) HP System Health Application and Command Line Utilities for SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Version: 8.5.0 (Optional) Related File: hp-health-8.5.0-%build.version_subst%.sles11.i386.rpm Related File: hp-health-8.5.0-%build.version_subst%.sles11.x86_64.rpm Enhancement Note: Split Advanced Server Recovery functionality into standalone hp-asrd service. For more information, execute 'man hp-asrd'. -------------------------------------------------------------------------------- HP SNMP Agents for SUSE LINUX Enterprise Server 11 (x86) HP SNMP Agents for SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Version: 8.5.0 (Optional) Related File: hp-snmp-agents-8.5.0-%build.version_subst%.sles11.i386.rpm Related File: hp-snmp-agents-8.5.0-%build.version_subst%.sles11.x86_64.rpm Fix Note: Fixed an issue where unwanted messages getting logged in the cma.log was resolved by removing the fprintf for virtual port. Fixed an issue where cmanicd leaves trail of zombie lspci processes by modifying lspci usage in port_map.c and redirected output to /dev/null. Fixed issue not to display driver messages on console for HP B110i Smart Array controller. Fixed issue on CmaX, which displayed parsing error message on the syslog during agents reboot. Enhancement Note: Enhanced HP SNMP Agents to retain default permission and ownership of snmpd.conf file. Added support and trap support (link up/down message) for the following HP NC-Series: HP NC551m Dual Port FlexFabric 10Gb Adapter HP NC551i Dual Port FlexFabric 10Gb Adapter HP NC365T 4-port Ethernet Server Adapter HP NC543i 10Gb 2-port 4X Flex-10 QDR Server Adapter HP NC553m 10Gb 2 port FlexFabric Converged Network Adapter HP NC552m 10Gb 2 port FlexFabric Converged Network Adapter HP NC553i 10Gb 2 port FlexFabric Converged Network Adapter HP NC552SFP 2-port 10Gb Server Adapter HP StorageWorks CN1000Q Dual Port Converged Network Adapter HP NC525m 10Gb 2 port FlexFabric Converged Network Adapter -------------------------------------------------------------------------------- HP System Management Homepage for Linux (x86) HP System Management Homepage for Linux (AMD64/EM64T) Version: 6.1.0-103 (Recommended) Related File: hpsmh-6.1.0-103.i386.rpm Related File: hpsmh-6.1.0-103.x86_64.rpm Fix Note: Service hpsmhd now displays the correct message as "hpsmhd already running" if one tries to start hpsmhd when it is already running. Similarly, hpsmhd displays the message "hpsmhd already stopped" if one tries to stop an already stopped hpsmhd. Enhancement Note: Updated OpenSSL to version 0.9.8l due to security vulnerabilities reported on earlier versions. -------------------------------------------------------------------------------- HP System Management Homepage Templates for Linux Version: 8.5.0 (Optional) Related File: hp-smh-templates-8.5.0-%build.version_subst%.noarch Important Note: The HP System Health Application and Insight Management Agents (hpasm) version 8.0.0 was split into three individual rpm packages: HP System Health Application and Command Line Utilities (hp-health) version 8.1.0 HP SNMP Agents (hp-snmp-agents) version 8.1.0 HP System Management Homepage Templates (hp-smh-templates) version 8.1.0 These three packages provide equivalent functionality as hpasm v8.0.0 and allow for a more modular installation choices. Enhancement Note: Enhanced HP SMH Templates to retain default permission and ownership of snmpd.conf file. -------------------------------------------------------------------------------- HP Array Configuration Utility for Linux Version: 8.50-5.0 (Recommended) Related File: cpqacuxe-%product.version%.noarch.rpm Enhancement Note: Added Hardware Revision information field to More Information Added Storage Enclosure subcomponent firmware revision information to: More Information Diagnostics Overall Performance and GUI improvements ACU Help additions: Added an auto-suggesting search input box Added browse history navigation buttons Added inline links on help pages ACU can detect and connect with removable media, including non-USB floppy disk drives as well as USB keys ACU SmartStart users can select the desired removable media onto which an ADU report can be saved and a Refresh Devices task button is present to allow updating the list of available devices Physical drives in a SMART state are allowed to be used at user's discretion Diagnostic Report additions: Parity group information for RAID 50 and RAID 60 logical drives Information for SEP devices and Expanders Updated Storage Enclosure names Applicable only with the appropriate SAAP License Key installed: The Move Array operation now allows the user to move an array to physical drives that are smaller than the original physical drives, provided that all the data in the existing logical drives will fit into the new array -------------------------------------------------------------------------------- HP Array Configuration Utility CLI for Linux Version: 8.50-6.0 (Recommended) Related File: hpacucli-%product.version%.noarch.rpm Enhancement Note: Overall Performance improvements Physical drives in a SMART state are allowed to be used at user's discretion Diagnostic Report additions: Parity group information for RAID 50 and RAID 60 logical drives Information for SEP devices and Expanders Updated Storage Enclosure names Applicable only with the appropriate SAAP License Key installed: The Move Array operation now allows the user to move an array to physical drives that are smaller than the original physical drives, provided that all the data in the existing logical drives will fit into the new array The new drive set must have the same number of physical drives as the existing drive set Added SEP devices and Expanders to "ctrl slot=X show config" and "ctrl slot=X show config detail" commands Added an "OS Status" for logical drives to indicate if it is "locked" by the OS Added display of Hardware Revision info for SAS Expander boards " enclosure all show detail" should be used in order to see the field displayed Added support for being able to run ACUCLI in non-interactive mode for read-only commands (show) even if ACU is running. For example: # hpacucli ctrl all show # hpacucli ctrl slot=1 pd all show status Added "exitonerror" feature which allows the application to exit upon encountering any error during execution of a command. This feature is useful for scripts invoking ACUCLI and the feature will allow scripts to know that an error has occurred. The setting can also be invoked from the console as an application switch Example: "hpacucli -exitonerror < myscript.txt" set [exitonerror=enable|disable] Allows a script to decide whether an error encountered during execution show exitonerror Displays the current exitonerror setting Added enclosure show support enclosure [ all | port:box | serialnumber=xxxx ] show [ detail | status] Outputs the storage enclosure information The target can be any valid storage enclosure Examples: controller slot=5 enclosure all show controller slot=5 enclosure 4E:1 show detail controller slot=5 enclosure serialnumber=UAB123456 show status Added support for the 'show' command to display devices in a logical or physical format similar to the support in ACU (GUI) set [view=logical|physical] Allows the user to select whether certain show commands display the output using a logical or physical view Logical view displays devices using their association with arrays Physical view displays the devices such as physical drives according to their relationship with their storage enclosures The default value is logical view show view Displays the current view setting. Examples: set view=physical show view Added the capability to run multiple commands in command line mode (non-interactive) The semicolon (";") is used as a delimiter between commands For example: On LINUX, the semicolon must be escaped or in quotes hpacucli "ctrl slot=1 show; ctrl slot=1 modify drivewritecache=enable; ctrl slot=1 show" HPACUSCRIPTING Additions: Now shows an expanded usage message when invalid command line arguments are provided Added feature to allow RAID=RAID1 for >2 disk mirrors. This allows backwards compatibility with "old" cpqacuxe scripting. Capture will still output correct RAID level Added AUTO as a valid option for QUEUEDEPTH Overall Performance improvements Added Controller=FIRST support. Controllers are now sorted in capture files in slot ascending order Added additional controller information to errors and warnings to better identify where problems occur in an input file -------------------------------------------------------------------------------- **(Critical)** HP Version Control Agent for Linux Version: 6.1.0-7 (Critical) Related File: hpvca-6.1.0-7.linux.rpm Important Note: Please manually downloand linux HPSUM from following location http://downloads.hpe.com//pub/softlib2/software1/sc-linux/p809864560/v55460/hpsum-4.0.0.scexe Copy this file to into the repository folder of Version Control Repositoy Manager version 6.1 or above Fix Note: VCA fails to install some drivers from Linux Support Packs. Enhancement Note: Automatically resolves RPM dependancies Install RPM based support packs and components. Performance enhancements to improve download and installation of packages User interface integrated into system management homepage -------------------------------------------------------------------------------- HP Insight Diagnostics Online Edition for Linux HP Insight Diagnostics Online Edition for Linux Version: 8.5.0-11 (Recommended) Related File: hpdiags-%product.version%.linux.i386.rpm Related File: hpdiags-%product.version%.linux.x86_64.rpm Enhancement Note: Added new hardware support. -------------------------------------------------------------------------------- HP Fibre Channel Enablement Kit for Linux Version: 1.1-17 (Optional) Related File: hp-fc-enablement-1.1-17.noarch.rpm Enhancement Note: Added support for SUSE Enterprise Linux 11 SP1. -------------------------------------------------------------------------------- HP Lights-Out Online Configuration Utility for Linux Version: 3.1.0-0 (Recommended) Related File: hponcfg-3.1.0-0.noarch.rpm Fix Note: Fixed an issue related to reset command for iLO3. Enhancement Note: Support for iLO3 based ProLiant G7 servers has been provided. -------------------------------------------------------------------------------- Copyright 2003-2010 Hewlett-Packard Development Company, L.P.