ProLiant Support Pack for SUSE LINUX Enterprise Server 11 (i686) & (x86_64) Version 8.40 INSTALLER -------------------------------------------------------------------------------- HP Smart Update Manager for Linux Version: 4.0.0 Important Note: SUSE Enterprise Linux 11 Support To successfully run HP Smart Update Manager on any local or remote target systems running a SUSE Enterprise Linux 11 operating system on x86 or x64 architectures, the library, compat-libstdc++-296-2.96-132.7.2.i386.rpm or another compatibility library that provides the file, /usr/lib/libstdc++-libc6.2-2.so.3 must be installed. Without this library, HPSUM will not complete discovery and return "Discovery Failed" messages to the users. This file can be found in the latest HP PSP for Linux as part of the hppldu-librpms-.tar.gz file. HP Smart Update Manager Version 4.0.0 Enhancements/New Features Added the ability to deploy native Linux RPMs. Support for downloading RPMs directly from hp.com will be in a future release. Added the following command line parameters /firmware_report generates a report listing the firmware installed on and details of the target /On_failed_dependency provides HP Smart Update Manager the information of how to proceed when a component has a failed dependency All reports are now generated in xml format as well as html format Added component criticality icon to each component listed on the Select Items to be Installed screen Added support for deploying firmware to HP ProLiant 100 Series servers (G6 and above) including support for flashing hard disk drives behind a Tanzanite controller Fix Note: Fixed operating system filtering on the Select Bundle Filter screen. -------------------------------------------------------------------------------- CONTENTS -------------------------------------------------------------------------------- HP ProLiant Smart Array Controller Driver for SUSE LINUX Enterprise Server 11 Version: 4.6.22-6 Related File: cpq_cciss-4.6.22-6.sles11.x86_64.rpm, cpq_cciss-4.6.22-6.sles11.i586.rpm Fix Note: Enhanced the sysfs support in the driver. Updated to better support sg3_utils. Increased the tape command reserve to better support tape changers. Improved lun reset code. Enhancement Note: Enhanced scatter gather support for performance. -------------------------------------------------------------------------------- HP U320 SCSI Adapter, SAS HBA with RAID, SCxxXe and SCxxGe series HBA Driver for SUSE LINUX Enterprise Server 11 Version: 4.00.13.07-1 Enhancement Note: New support for Sles 11. -------------------------------------------------------------------------------- HP Smart Array B110i SATA RAID Controller Driver for SUSE LINUX Enterprise Server 11 Version: 1.2.4-10 Related File: hpahcisr-1.2.4-10.sles11.x86_64.rpm, hpahcisr-1.2.4-10.sles11.i586.rpm Enhancement Note: Initial release for HP Smart Array B110i SATA RAID Controller for SUSE LINUX Enterprise Server 11 -------------------------------------------------------------------------------- HP NC-Series Intel e1000 Driver for Linux Version: 8.0.18-3 Related File: hp-e1000-8.0.18-3.src.rpm Fix Note: This driver version now compiles correctly on Red Hat Enterprise Linux 5 Update 4. -------------------------------------------------------------------------------- HP NC-Series Intel e1000e Driver for Linux Version: 1.0.15-2 Related File: hp-e1000e-1.0.15-2.src.rpm Enhancement Note: This driver now supports Red Hat Enterprise Linux 5 Update 4. -------------------------------------------------------------------------------- Tools Package for HP NC-Series QLogic Driver for Linux Version: 4.0.520-5 Related File: hp-nx_nic-tools-4.0.520-5.noarch.rpm Enhancement Note: Initial release. -------------------------------------------------------------------------------- HP NC-Series QLogic Driver for Linux Version: 4.0.520-5 Related File: hp-nx_nic-4.0.520-5.src.rpm Enhancement Note: This driver now supports Red Hat Enterprise Linux 5 Update 4. -------------------------------------------------------------------------------- HP NC-Series Broadcom iSCSI daemon for Linux iSCSI Driver Version: 5.2.27-5 Related File: hp-netxtreme2-bnx2id-5.2.27-5.src.rpm Enhancement Note: Initial release. -------------------------------------------------------------------------------- HP NC-Series Broadcom 1Gb and 10GbE Multifunction and iSCSI Drivers for Linux Version: 5.2.27-5 Related File: hp-netxtreme2-5.2.27-5.src.rpm Fix Note: This driver now loads correctly on Red Hat Enterprise Linux 5 Update 4. Enhancement Note: This rpm package now also contains the Linux iSCSI driver for the supported network adapters. -------------------------------------------------------------------------------- HP NC-Series Broadcom TG3 Driver for Linux Version: 3.99p-5 Related File: hp-tg3-3.99p-4.src.rpm Enhancement Note: This driver now supports Red Hat Enterprise Linux 5 Update 4. -------------------------------------------------------------------------------- HP NC-Series Intel igb Driver for Linux Version: 2.1.9-3 Related File: hp-igb-2.1.9-3.src.rpm Enhancement Note: This driver now supports Red Hat Enterprise Linux 5 Update 4. -------------------------------------------------------------------------------- HP NC-Series ServerEngines be2net 10GbE Driver for Linux Version: 2.101.374.0-3 Related File: hp-be2net-2.101.374.0-3.src.rpm Enhancement Note: Initial release. -------------------------------------------------------------------------------- HP NC-Series ServerEngines be2iscsi Driver for Linux Version: 2.101.374.0-3 Related File: hp-be2iscsi-2.101.374.0-3.src.rpm Enhancement Note: Initial release. -------------------------------------------------------------------------------- HP NC-Series Mellanox 10GbE Driver for Linux Version: 1.4.3.1-2 Related File: hp-mlnx-en-1.4.3.1-2.src.rpm Enhancement Note: This driver now supports Red Hat Enterprise Linux 5 Update 4. -------------------------------------------------------------------------------- HP OpenIPMI Device Driver for SUSE LINUX Enterprise Server 11 Version: 8.4.0-*.sles11 Related File: hp-OpenIPMI-8.4.0-%build.version_subst%.sles11.x86_64.rpm, hp-OpenIPMI-8.4.0-%build.version_subst%.sles11.i386.rpm Fix Note: Fixed the compatibility with SLES11 kernels when source package version may not match binary package version. Enhancement Note: Rebuilt the driver against current distribution kernels. -------------------------------------------------------------------------------- HP System Health Application and Command Line Utilities for SUSE LINUX Enterprise Server 11 Version: 8.4.0 Related File: hp-health-8.4.0-%build.version_subst%.sles11.x86_64.rpm, hp-health-8.4.0-%build.version_subst%.sles11.i386.rpm Fix Note: The Intel processor hyperthreading configuration can be enabled and disabled using hpasmcli on HP ProLiant G6 servers. Fix POSIX-compliancy issue with initscript. Avoid sending a SIGKILL to the health daemon, preventing ASRs that may occur on platforms (e.g. DL785) where hp-health shutdowns may take an extended amount of time. Enhancement Note: Added support for Integrated Lights-Out 3 (iLO 3). Added 'SHOW SEL' option in hpasmcli to display the System Event Log (SEL) contents on HP ProLiant 100 series servers. Updated libcpqci.so, which take advantage of upstream changes to hpilo, to provide better performance to applications, such as SNMP agents like cmasm2d from hp-snmp-agents. Added 64-bit hpbootcfg utility. -------------------------------------------------------------------------------- HP SNMP Agents for SUSE LINUX Enterprise Server 11 Version: 8.4.0 Related File: hp-snmp-agents-8.4.0-%build.version_subst%.sles11.sles11.x86_64.rpm, hp-snmp-agents-8.4.0-%build.version_subst%.sles11.i386.rpm Fix Note: Modified the 6064 trap implementation to reflect the correct error. Removed unnecessary information in cmahostd related to bonding driver, in order to improve performance. Fixed an issue to display the Port number of Physical drives connected to Fiber Channel controller. Fixed an issue to display Parity group count for RAID 50 and RAID 60 Logical drives. Modified the script to get the NIC ports details from /sys/class/net. Fixed an issue where wrong physical address is displayed on SMH, resolution was provided by checking for pcidevice information instead of subsytem device information. Fixed an issue where SNMP Alerts/IMA trap were not received by HP SIM. Fixed an issue where junk characters and misalignment on the console during reboot by adding new line in stop section. Fixed an issue where Linux SMH shows incorrect bay/port information by adding support for virtual port. Fixed an issue where cmanicd is filling /var/log/messages via setroublesoot, resolved by modified selinux policy package (HPcmanic.pp). Enhancement Note: Added support for HP ProLiant G7 Servers. Added support for Integrated Lights-Out 3 (iLO 3). Included a document called HP_SNMP_Trap_Guide.txt that describes the Linux SNMP trap ID messages generated by the agents. Improvements to distribution identification including more consistent output and increased support for community and regional distributions. Added support for Solid State Drives. Added support for HP StorageWorks 2000sa Modular Storage Array and HP StorageWorks MSA2012sa/ MSA2312sa/ MSA2324sa when connected to HP SC08Ge Host Bus Adapter. Added support and trap support (link up/down message) for the following HP NC-Series: HP NC542m Dual Port Flex-10 10GbE BL-c Adapter HP StorageWorks CN1000E Dual Port Converged Network Adapter HP NC550m Dual Port Flex-10 10GbE BL-c Adapter HP NC551m Dual Port FlexFabric 10Gb Converged Network Adapter HP NC551i Dual Port FlexFabric 10Gb Network Adapter HP NC362i Integrated Dual Port Gigabit Server Adapter HP NC362i Integrated Dual Port BL-c Gigabit Server Adapter -------------------------------------------------------------------------------- HP System Management Homepage for Linux Version: 6.1.0-103 Related File: hpsmh-6.1.0-103.x86_64.rpm, hpsmh-6.1.0-103.i386.rpm Fix Note: Service hpsmhd now displays the correct message as "hpsmhd already running" if one tries to start hpsmhd when it is already running. Similarly, hpsmhd displays the message "hpsmhd already stopped" if one tries to stop an already stopped hpsmhd. Enhancement Note: Updated OpenSSL to version 0.9.8l due to security vulnerabilities reported on earlier versions. -------------------------------------------------------------------------------- HP System Management Homepage Templates for Linux Version: 8.4.0 Related File: hp-smh-templates-8.4.0-%build.version_subst%.noarch Important Note: The HP System Health Application and Insight Management Agents (hpasm) version 8.0.0 was split into three individual rpm packages: HP System Health Application and Command Line Utilities (hp-health) version 8.1.0 HP SNMP Agents (hp-snmp-agents) version 8.1.0 HP System Management Homepage Templates (hp-smh-templates) version 8.1.0 These three packages provide equivalent functionality as hpasm v8.0.0 and allow for a more modular installation choices. Enhancement Note: Added support for Integrated Lights-Out 3 (iLO 3). -------------------------------------------------------------------------------- HP Array Configuration Utility for Linux Version: 8.40-4.0 Related File: cpqacuxe-%product.version%.noarch.rpm Enhancement Note: Support for Smart Array P812 -------------------------------------------------------------------------------- HP Array Configuration Utility CLI for Linux Version: 8.40-4.0 Related File: hpacucli-%product.version%.noarch.rpm Enhancement Note: Support for Smart Array P812 -------------------------------------------------------------------------------- HP Version Control Agent for Linux Version: 6.1.0-5 Related File: hpvca-6.1.0-3.linux.rpm Enhancement Note: Automatically resolves RPM dependancies Install RPM based support packs and components. Performance enhancements to improve download and installation of packages User interface integrated into system management homepage -------------------------------------------------------------------------------- HP Insight Diagnostics Online Edition for Linux Version: 8.4.0-18 Related File: hpdiags-%product.version%.linux.x86_64.rpm, hpdiags-%product.version%.linux.i386.rpm Enhancement Note: Added new hardware support. -------------------------------------------------------------------------------- HP Fibre Channel Enablement Kit for Linux Version: 1.1-14 Related File: hp-fc-enablement-1.1-14.noarch.rpm Fix Note: Resynchronized the driver parameters for the qla2xxx and lpfc kernel modules when used with Device Mapper multipathing. Recreate the initrd during uninstallation of the hp-fc-enablement RPM. Fixed ia64 libemsdm.so copy error. Fixed corruption of qla2xxx driver parameter text in /etc/modprobe.conf in some instances where the driver parameters had been entered manually. -------------------------------------------------------------------------------- HP Lights-Out Online Configuration Utility for Linux Version: 3.0.0-0 Related File: hponcfg-3.0.0-0.noarch.rpm Enhancement Note: Enabled support for iLO3 devices.