ProLiant Support Pack for Red Hat Enterprise Linux 4 version 8.40 INSTALLER -------------------------------------------------------------------------------- HP Smart Update Manager for Linux Version: 4.0.0 Important Note: SUSE Enterprise Linux 11 Support To successfully run HP Smart Update Manager on any local or remote target systems running a SUSE Enterprise Linux 11 operating system on x86 or x64 architectures, the library, compat-libstdc++-296-2.96-132.7.2.i386.rpm or another compatibility library that provides the file, /usr/lib/libstdc++-libc6.2-2.so.3 must be installed. Without this library, HPSUM will not complete discovery and return "Discovery Failed" messages to the users. This file can be found in the latest HP PSP for Linux as part of the hppldu-librpms-.tar.gz file. HP Smart Update Manager Version 4.0.0 Enhancements/New Features Added the ability to deploy native Linux RPMs. Support for downloading RPMs directly from hp.com will be in a future release. Added the following command line parameters /firmware_report generates a report listing the firmware installed on and details of the target /On_failed_dependency provides HP Smart Update Manager the information of how to proceed when a component has a failed dependency All reports are now generated in xml format as well as html format Added component criticality icon to each component listed on the Select Items to be Installed screen Added support for deploying firmware to HP ProLiant 100 Series servers (G6 and above) including support for flashing hard disk drives behind a Tanzanite controller Fix Note: Fixed operating system filtering on the Select Bundle Filter screen. -------------------------------------------------------------------------------- CONTENTS -------------------------------------------------------------------------------- HP StorageWorks QLogic Fibre Channel Driver for 2.6.x Kernels Version: 8.02.23-2 Related File: hp_qla2x00src-8.02.23-2.noarch.rpm Fix Note: Fixed summary string in RPM -------------------------------------------------------------------------------- HP StorageWorks QLogic Fibre Channel Driver for c-Class Blade Servers Version: 8.02.23-2 Related File: hp_qla2x00src-mezz-8.02.23-2.noarch.rpm Fix Note: Fixed summary string in RPM -------------------------------------------------------------------------------- HP Linux Driver Kit for Emulex Based Fibre Channel Host Bus Adapters for 2.6.x Kernels Version: 8.0.16.40-12 Related File: hp-lpfc-8.0.16.40-12.rhel4.noarch.rpm Important Note: Driver contained in RPM is 8.0.16.40_p2 Enhancement Note: Changed file name to reflect what distribution the RPM is supported on. -------------------------------------------------------------------------------- HP ProLiant Smart Array Controller Driver for Red Hat Enterprise Linux 4 Version: 2.6.20-33 Related File: cpq_cciss-2.6.20-33.rhel4.x86_64.rpm, cpq_cciss-2.6.20-33.rhel4.i686.rpm Enhancement Note: Added post Red Hat Enterprise Linux 4 Update 8 errata kernel support -------------------------------------------------------------------------------- HP U320 SCSI Adapter, SAS HBA with RAID, SCxxXe and SCxxGe series HBA Driver for Red Hat Enterprise Linux 4 Version: 3.12.14.00-5 Related File: mptlinux-3.12.14.00-2.rhel4.x86_64.rpm, mptlinux-3.12.14.00-2.rhel4.i686.rpm Enhancement Note: Added support for Red Hat Enterprise Linux 4 Update 8 -------------------------------------------------------------------------------- HP Smart Array B110i SATA RAID Controller Driver for Red Hat Enterprise Linux 4 Version: 1.2.4-10 Related File: hpahcisr-1.2.4-10.rhel4.x86_64.rpm, hpahcisr-1.2.4-10.rhel4.i686.rpm Enhancement Note: Added drive LED support. -------------------------------------------------------------------------------- HP NC-Series Intel e1000 Driver for Linux Version: 8.0.16-1 Related File: e1000-8.0.16-1.src.rpm Fix Note: This driver version now compiles correctly on Red Hat Enterprise Linux 5 Update 4. -------------------------------------------------------------------------------- HP NC-Series Intel e1000e Driver for Linux Version: 1.0.15-1 Related File: e1000e-1.0.15-1.src.rpm Fix Note: This source rpm will no longer attempt to compile on the XenU kernel. This driver sets the supported external field so SUSE Linux Enterprise Server 11 no longer prevents the module from loading. -------------------------------------------------------------------------------- HP NC-Series Broadcom TG3 Driver for Linux Version: 3.99h-1 Related File: tg3-3.99h-1.src.rpm Enhancement Note: This software no longer supports SUSE LINUX Enterprise Server 9. This software package contains the latest available driver from Broadcom. -------------------------------------------------------------------------------- HP NC-Series Broadcom 1Gb and 10GbE Multifunction Driver for Linux Version: 5.0.24-1 Related File: netxtreme2-5.0.24-1.src.rpm Enhancement Note: This is the latest available driver from Broadcom. -------------------------------------------------------------------------------- HP NC-Series QLogic Driver for Linux Version: 4.0.516-1 Related File: nx_nic-4.0.516-1.src.rpm Enhancement Note: This software now supports the HP NC375T PCI Express Quad Port Gigabit Server Adapter. -------------------------------------------------------------------------------- QLogic iSCSI Driver for Linux Version: 5.01.01.04-1 Related File: qla4xxx-5.01.01.04-1.src.rpm Enhancement Note: Initial release. -------------------------------------------------------------------------------- HP NC-Series Intel igb Driver for Linux Version: 2.0.5-1 Related File: igb-2.0.5-1.src.rpm Fix Note: This driver now compiles correctly on Red Hat Enterprise Linux Update 4. -------------------------------------------------------------------------------- Init and Configuration file for Vlan Version: 1.0.1e-1 Related File: vlan_init-1.0.1e-1.linux.rpm Enhancement Note: This driver now supports the NC360T and NC373T NICs. -------------------------------------------------------------------------------- HP NC-Series Mellanox 10GbE Driver for Linux Version: 1.4.2-1 Related File: hp-mlnx-en-1.4.2-1.src.rpm Enhancement Note: This driver now supports the HP NC542m Dual Port Flex-10 10GbE BL-c Adapter. -------------------------------------------------------------------------------- HP OpenIPMI Device Driver for Red Hat Enterprise Linux 4 Version: 8.4.0-*.rhel4 Related File: hp-OpenIPMI-8.4.0-%build.version_subst%.rhel4.x86_64.rpm, hp-OpenIPMI-8.4.0-%build.version_subst%.rhel4.i386.rpm Enhancement Note: Rebuilt the driver against current distribution kernels. -------------------------------------------------------------------------------- HP ProLiant Channel Interface Device Driver for iLO / iLO 2 for Red Hat Enterprise Linux 4 Version: 8.4.0-*.rhel4 Related File: hp-ilo-8.4.0-%build.version_subst%.rhel4.x86_64.rpm, hp-ilo-8.4.0-%build.version_subst%.rhel4.i386.rpm Enhancement Note: Rebuilt the driver against current distribution kernels. Included changes from upstream, adding interrupt handler and poll method to improve application performance. -------------------------------------------------------------------------------- HP System Health Application and Command Line Utilities for Red Hat Enterprise Linux 4 Version: 8.4.0 Related File: hp-health-8.4.0-%build.version_subst%.rhel4.x86_64, hp-health-8.4.0-%build.version_subst%.rhel4.i386.rpm Important Note: The HP System Health Application and Insight Management Agents (hpasm) version 8.0.0 was split into three individual rpm packages: HP System Health Application and Command Line Utilities (hp-health) version 8.1.0 HP SNMP Agents (hp-snmp-agents) version 8.1.0 HP System Management Homepage Templates (hp-smh-templates) version 8.1.0 These three packages provide equivalent functionality as hpasm v8.0.0 and allow for a more modular installation choice. Fix Note: The Intel processor hyperthreading configuration can be enabled and disabled using hpasmcli on HP ProLiant G6 servers. Fix POSIX-compliancy issue with initscript. Avoid sending a SIGKILL to the health daemon, preventing ASRs that may occur on platforms (e.g. DL785) where hp-health shutdowns may take an extended amount of time. Enhancement Note: Added support for Integrated Lights-Out 3 (iLO 3). Added 'SHOW SEL' option in hpasmcli to display the System Event Log (SEL) contents on HP ProLiant 100 series servers. Updated libcpqci.so, which take advantage of upstream changes to hpilo, to provide better performance to applications, such as SNMP agents like cmasm2d from hp-snmp-agents. Added 64-bit hpbootcfg utility. -------------------------------------------------------------------------------- HP SNMP Agents for Red Hat Enterprise Linux 4 Version: 8.4.0 Related File: hp-snmp-agents-8.4.0-%build.version_subst%.rhel4.x86_64.rpm, hp-snmp-agents-8.4.0-%build.version_subst%.rhel4.i386.rpm Important Note: The HP System Health Application and Insight Management Agents (hpasm) version 8.0.0 was split into three individual rpm packages: HP System Health Application and Command Line Utilities (hp-health) version 8.1.0 HP SNMP Agents (hp-snmp-agents) version 8.1.0 HP System Management Homepage Templates (hp-smh-templates) version 8.1.0 These three packages provide equivalent functionality as hpasm v8.0.0 and allow for a more modular installation choices. Fix Note: Modified the 6064 trap implementation to reflect the correct error. Removed unnecessary information in cmahostd related to bonding driver, in order to improve performance. Fixed an issue to display the Port number of Physical drives connected to Fiber Channel controller. Fixed an issue to display Parity group count for RAID 50 and RAID 60 Logical drives. Modified the script to get the NIC ports details from /sys/class/net. Fixed an issue where wrong physical address is displayed on SMH, resolution was provided by checking for pcidevice information instead of subsytem device information. Fixed an issue where SNMP Alerts/IMA trap were not received by HP SIM. Fixed an issue where junk characters and misalignment on the console during reboot by adding new line in stop section. Fixed an issue where Linux SMH shows incorrect bay/port information by adding support for virtual port. Fixed an issue where cmanicd is filling /var/log/messages via setroublesoot, resolved by modified selinux policy package (HPcmanic.pp). Enhancement Note: Added support for HP ProLiant G7 Servers. Added support for Integrated Lights-Out 3 (iLO 3). Included a document called HP_SNMP_Trap_Guide.txt that describes the Linux SNMP trap ID messages generated by the agents. Improvements to distribution identification including more consistent output and increased support for community and regional distributions. Added support for Solid State Drives. Added support for HP StorageWorks 2000sa Modular Storage Array and HP StorageWorks MSA2012sa/ MSA2312sa/ MSA2324sa when connected to HP SC08Ge Host Bus Adapter. Added support and trap support (link up/down message) for the following HP NC-Series (x86_64 only): HP NC542m Dual Port Flex-10 10GbE BL-c Adapter HP StorageWorks CN1000E Dual Port Converged Network Adapter HP NC550m Dual Port Flex-10 10GbE BL-c Adapter HP NC551m Dual Port FlexFabric 10Gb Converged Network Adapter HP NC551i Dual Port FlexFabric 10Gb Network Adapter HP NC362i Integrated Dual Port Gigabit Server Adapter HP NC362i Integrated Dual Port BL-c Gigabit Server Adapter -------------------------------------------------------------------------------- HP iLO2 High-Performance Mouse for Linux Version: 1.2.0-* Related File: hpmouse-1.2.0-%build.version_subst%.noarch.rpm Enhancement Note: Added support for Integrated Lights-Out 3 (iLO 3). -------------------------------------------------------------------------------- HP System Management Homepage for Linux Version: 6.1.0-103 Related File: hpsmh-6.1.0-103.x86_64.rpm, hpsmh-6.1.0-103.i386.rpm Fix Note: Service hpsmhd now displays the correct message as "hpsmhd already running" if one tries to start hpsmhd when it is already running. Similarly, hpsmhd displays the message "hpsmhd already stopped" if one tries to stop an already stopped hpsmhd. Enhancement Note: Updated OpenSSL to version 0.9.8l due to security vulnerabilities reported on earlier versions. -------------------------------------------------------------------------------- HP System Management Homepage Templates for Linux Version: 8.4.0 Related File: hp-smh-templates-8.4.0-%build.version_subst%.noarch Important Note: The HP System Health Application and Insight Management Agents (hpasm) version 8.0.0 was split into three individual rpm packages: HP System Health Application and Command Line Utilities (hp-health) version 8.1.0 HP SNMP Agents (hp-snmp-agents) version 8.1.0 HP System Management Homepage Templates (hp-smh-templates) version 8.1.0 These three packages provide equivalent functionality as hpasm v8.0.0 and allow for a more modular installation choices. Enhancement Note: Added support for Integrated Lights-Out 3 (iLO 3). -------------------------------------------------------------------------------- HP Array Configuration Utility for Linux Version: 8.40-4.0 Related File: cpqacuxe-%product.version%.noarch.rpm Enhancement Note: Support for Smart Array P812 -------------------------------------------------------------------------------- HP Array Configuration Utility CLI for Linux Version: 8.40-4.0 Related File: hpacucli-%product.version%.noarch.rpm Enhancement Note: Support for Smart Array P812 -------------------------------------------------------------------------------- HP Version Control Agent for Linux Version: 6.1.0-5 Related File: hpvca-6.1.0-3.linux.rpm Enhancement Note: Automatically resolves RPM dependancies Install RPM based support packs and components. Performance enhancements to improve download and installation of packages User interface integrated into system management homepage -------------------------------------------------------------------------------- HP Insight Diagnostics Online Edition for Linux Version: 8.4.0-18 Related File: hpdiags-%product.version%.linux.x86_64.rpm, hpdiags-%product.version%.linux.i386.rpm Enhancement Note: Added new hardware support. -------------------------------------------------------------------------------- Fibreutils for HP StorageWorks Fibre Channel Host Bus Adapter for Linux Version: 2.5-4 Related File: fibreutils-2.5-4.x86_64.rpm, fibreutils-2.5-4.i386.rpm Fix Note: - Add preinstall checks so that version 2.x of fibreutils does not install on RHEL 5.3 or greater or SLES 10 SP 3 or greater - Fixed problem in lssd printing sdsd* device names - Add support for a five character device name is lssd - Changes to RPM to comply with RPM commonality spec. - Fix grep statement that parses /sys/block for sd devices in lssd - Fixed adapter_info -L flag on SLES 9 SP 4 - Fixed printing QLogic driver version in adapter_info -------------------------------------------------------------------------------- HP Lights-Out Online Configuration Utility for Linux Version: 3.0.0-0 Related File: hponcfg-3.0.0-0.noarch.rpm Enhancement Note: Enabled support for iLO3 devices.