Release Notes for ProLiant Support Pack for Red Hat Enterprise Linux 5, v8.11 Following is the list of the fixes and/or enhancements for all components in either the 8.11 x86 or x86_64 Red Hat Enterprise Linux 5 support packs. ******************************** hp_qla2x00src-8.02.11-2.linux.noarch.rpm - HP StorageWorks QLogic Fibre Channel Driver for 2.6.x Kernels, v8.02.11-2 Enhancements Added 8.02.11 adapter driver Added support for AK344A single port 8Gb/s fibre channel host bus adapter Added support for AJ764A dual port 8Gb/s fibre channel host bus adapters ******************************** hp_qla2x00src-mezz-8.01.07.25-1.linux.noarch.rpm - HP StorageWorks QLogic Fibre Channel Driver for c-Class Blade Servers, v8.01.07.25-1 Enhancements Initial Product. ******************************** hp-lpfc-8.2.0.22-5.linux.rpm - HP Linux Driver Kit for Emulex Based Fibre Channel Host Bus Adapters for 2.6.x Kernels, v8.2.0.22-5 Enhancements Added 8.2.0.22_p1 base driver Added support for AJ762A single port 8Gb/s fibre channel host bus adapter Added support for AJ763A dual port 8Gb/s fibre channel host bus adapter ******************************** cpq_cciss-3.6.18-17.rhel5.i686.rpm - HP ProLiant Smart Array Controller (x86/AMD32) Driver for Red Hat Enterprise Linux 5 (x86), v3.6.18-17, and cpq_cciss-3.6.18-17.rhel5.x86_64.rpm - HP ProLiant Smart Array Controller (AMD64/EM64T) Driver for Red Hat Enterprise Linux 5 (AMD64/EM64T), v3.6.18-17 Fixes Includes fix for the issue where the Linux operating system was not getting recovered when larger LUNS are created after OS installation. ******************************** mptlinux-4.00.13.04-2.rhel5.i686.rpm - HP U320 SCSI Adapter and SAS HBA with RAID (AMD32 & x86) Driver for Red Hat Enterprise Linux 5 (x86), v4.00.13.04-2, and mptlinux-4.00.13.04-2.rhel5.x86_64.rpm - HP U320 SCSI Adapter and SAS HBA with RAID (AMD64/EM64T) Driver for Red Hat Enterprise Linux 5 (AMD64/EM64T), v4.00.13.04-2 Enhancements Added support for Update 1. Added support for 2.6.18-53.1.13.el5. ******************************** e1000-7.6.15a-1.src.rpm - HP NC-Series Intel Driver for Linux, v7.6.15a-1 Enhancements This driver is the latest available driver from Intel. ******************************** tg3-3.92e-3.src.rpm - HP NC-Series Broadcom TG3 Driver for Linux, v3.92e-3 Fixes This driver now builds correctly on SLES9 SP3/SP4 and RH5.2. Enhancements This driver now supports the NC107i network adapter. ******************************** bnx2-1.7.6b-1.src.rpm - HP HP NC-Series Multifunction Driver for Linux, v1.7.6b-1 Fixes This driver now correctly reports link loss on blade servers with the NC370i LOM. This driver now compiles correctly on SLES9.4. Enhancements This driver now supports the HP NC382i, NC382m and NC382T network adapters. ******************************** bnx2x-1.45.11-1.src.rpm - HP NC-Series Broadcom 10Gb Multifunction Driver for Linux, v1.45.11-1 Enhancements Initial release. ******************************** nx_nic-3.4.336-1.src.rpm - HP Linux Socket Acceleration, v3.4.336-1 Enhancements This software is the latest available from NetXen. ******************************** nx_lsa-3.4.336-1.src.rpm - HP NC-Series NetXen Driver for Linux, v3.4.336-1 Enhancements This driver is the latest driver version available from NetXen. ******************************** hp-OpenIPMI-8.1.0-104.rhel5.i386.rpm - HP OpenIPMI Device Driver for Red Hat Enterprise Linux 5, Update 6 (x86), v8.1.0-104.rhel5, and hp-OpenIPMI-8.1.0-104.rhel5.x86_64.rpm - HP OpenIPMI Device Driver for Red Hat Enterprise Linux 5 (AMD64/EM64T), v8.1.0-104.rhel5 Fixes Minor packaging fixes, including file permissions and rpm header information. Enhancements Package upgrade support (rpm -U). ******************************** hp-ilo-8.1.0-104.rhel5.i386.rpm - HP ProLiant Channel Interface for Red Hat Enterprise Linux 5 (x86) , v8.1.0-104.rhel5, and hp-ilo-8.1.0-104.rhel5.x86_64.rpm - HP ProLiant Channel Interface for Red Hat Enterprise Linux 5 (AMD64/EM64T) , v8.1.0-104.rhel5 Fixes Minor packaging fixes, including file permissions and rpm header information. Enhancements Xen Kernel suppport. Package upgrade support (rpm -U). ******************************** hp-health-8.1.1-14.rhel5.i386.rpm - HP System Health Application and Insight Management Agents for Red Hat Enterprise Linux 5 (x86), v8.1.1-14.rhel5, and hp-health-8.1.1-14.rhel5.x86_64.rpm - HP System Health Application and Command Line Utilities for Red Hat Enterprise Linux 5 (AMD64/EM64T), v8.1.1-14.rhel5 Fixes Fixed an issue to align hp-health status messages. Fixed an issue to stop pagination of IMLs when in script mode. The “hp-snmp-agents” and "hp-health" initialization scripts are enhanced to check for the existence of a support IPMI stack. ******************************** hp-snmp-agents-8.1.1-22.rhel5.i386.rpm - HP SNMP Agents for Red Hat Enterprise Linux 5 (x86), v8.1.1-22.rhel5, and hp-snmp-agents-8.1.1-22.rhel5.x86_64.rpm - HP SNMP Agents for Red Hat Enterprise Linux 5 (AMD64/EM64T), v8.1.1-22.rhel5 Fixes Fixed the rebuild script for hp-snmp-agents. Fixed an issue where the agents show IOCTL ERROR message when it polls the first time after booting the system. Fixed memory leak issues in presence of bond and VLan interfaces. Fixed an issue where the agents were showing disabled on systems that don't support hyperthreading. The hp-snmp-agents script will now properly halt if the hp-health initialization script fails to exit cleanly. Enhancements Initial release. NIC Agent now shows IPV6 address in System Management Homepage (hpsmh) on IPv6 only system. Added fan module number to message logged to syslog for MSA70. Changed "opt/compaq" to "opt/hp/hp-snmp-agents". Updated reported MIB revisions for 8.10 storage agents. Make physical drive path status in the physical drive table report as PATH_STATUS_OTHER if the physical drive status is PHYS_FAILED. Make the path table report path status as "PATH_STATUS_OTHER" when the physical drive status is unknown. ******************************** hpsmh-2.1.12-200.linux.i386.rpm - HP System Management Homepage for Linux (x86), v2.1.12-200, and hpsmh-2.1.12-200.linux.x86_64.rpm - HP System Management Homepage for Linux (AMD64/EM64T), v2.1.12-200 Fixes Fixed a cross-site scripting vulnerability (XSS) ******************************** hp-smh-templates-8.1.1-19.noarch.rpm - HP System Management Homepage Templates for Linux, v8.1.1-19 Fixes Fixed an issue where the help page was missing description of a Locked and Hot Plug. Enhancements Initial release. Added the entry 'trapIf' to cma.conf file. This can be used to inform SNMP daemon which IP Address to use for sending the traps if there are multiple NICs configured in the system. ******************************** hpmouse-1.1.1-41.noarch.rpm - HP Version Control Agent for Linux, v1.1.1-41 Enhancements Added code to accept any variance of ‘Yes’ will work for HPMOUSESILENT. ******************************** hpvca-2.1.9-7.linux.rpm - HP Version Control Agent for Linux, v2.1.9-7 Enhancements Support for componentized installer that can be integrated into VCA. ******************************** cpqacuxe-8.10-1.linux.rpm - HP Array Configuration Utility for Linux, v8.10-1 Fixes Updated version number for the 8.10 Linux support pack release. No other changes were made. ******************************** hpacucli-8.10-2.linux.rpm - HP Array Configuration Utility CLI for Linux, v8.10-2 Fixes Fixed an issue related to an incorrect Background Parity Initialization status being displayed for RAID 5 and RAID 6 Logical Drives. ******************************** hpadu-8.10-3.linux.rpm - HP Array Diagnostics Utility for Linux, v8.10-3 Fixes Fixed an issue related to an incorrect Background Parity Initialization status being displayed for RAID 5 and RAID 6 Logical Drives. Enhancements Fixes incorrect Background Parity Initialization status for RAID 5 and RAID 6 Logical Drives. ******************************** hpdiags-8.1.1-206.linux.i386.rpm - HP Insight Diagnostics Online Edition for Linux, v8.1.1-206 Enhancements Added new hardware support. Enhancement to "Diagnosis" Tool to include Power Supply ******************************** fibreutils-2.4-1.linux.i386.rpm - Fibre Channel Utilities for HP StorageWorks FCA2214/FCA2214DC FC HBA for Linux (x86), v2.4-1, and fibreutils-2.4-1.linux.x86_64.rpm - Fibre Channel Utilities for HP StorageWorks FCA2214/FCA2214DC FC HBA for Linux (AMD64/EM64T), v2.4-1 Fixes Build 2.4-1 Added -c options to lssg and lssd Build 2.3-8 Add check to lssg to make sure that /sys/class/scsi_generic exists Build 2.3-7 Fixed LUN parsing issue in probe-luns Build 2.3-6 Fixed a hang when scanning in lssg Build 2.3-5 Changed lssd and lssg to not stop on a scsi_info failure ******************************** hponcfg-1.8.0-1.noarch.rpm - HP Lights-Out Online Configuration Utility for Linux, v1.8.0-1 Enhancements Provides indication to the user about the firmware reset whenever firmware is reset on execution of some XML/RIBCL script. Supports use of standard streams. It allows XML input to be provided over standard input and it directs the output messages and error messages to proper streams. ******************************** Copyright 2003-2008 Hewlett-Packard Development Company, L.P.