Linux version 2.6.18-92.el5PAE (mockbuild@builder16.centos.org) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-42)) #1 SMP Tue Jun 10 19:22:41 EDT 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000d7e66000 (usable) BIOS-e820: 00000000d7e66000 - 00000000d7e6e000 (ACPI data) BIOS-e820: 00000000d7e6e000 - 00000000d7e6f000 (usable) BIOS-e820: 00000000d7e6f000 - 00000000d8000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000127fff000 (usable) 3839MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f4f80 Memory for crash kernel (0x0 to 0x0) notwithin permissible range disabling kdump Using x86 segment limits to approximate NX protection On node 0 totalpages: 1212415 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 983039 pages, LIFO batch:31 DMI 2.4 present. Using APIC driver default ACPI: RSDP (v002 HP ) @ 0x000f4f00 ACPI: XSDT (v001 HP ProLiant 0x00000002 Ò 0x0000162e) @ 0xd7e667c0 ACPI: FADT (v003 HP ProLiant 0x00000002 Ò 0x0000162e) @ 0xd7e66840 ACPI: SPCR (v001 HP SPCRRBSU 0x00000001 Ò 0x0000162e) @ 0xd7e66140 ACPI: MCFG (v001 HP ProLiant 0x00000001 0x00000000) @ 0xd7e661c0 ACPI: HPET (v001 HP ProLiant 0x00000002 Ò 0x0000162e) @ 0xd7e66200 ACPI: SPMI (v005 HP ProLiant 0x00000001 Ò 0x0000162e) @ 0xd7e66240 ACPI: ERST (v001 HP ProLiant 0x00000001 Ò 0x0000162e) @ 0xd7e66280 ACPI: MADT (v001 HP ProLiant 0x00000002 0x00000000) @ 0xd7e66480 ACPI: FFFF (v001 HP ProLiant 0x00000001 Ò 0x0000162e) @ 0xd7e66540 ACPI: BERT (v001 HP ProLiant 0x00000001 Ò 0x0000162e) @ 0xd7e666c0 ACPI: HEST (v001 HP ProLiant 0x00000001 Ò 0x0000162e) @ 0xd7e66700 ACPI: DSDT (v001 HP DSDT 0x00000001 INTL 0x20030228) @ 0x00000000 ACPI: PM-Timer IO Port: 0x908 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) Processor #2 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) Processor #3 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x10228201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at dc000000 (gap: d8000000:26c00000) Detected 2128.059 MHz processor. Built 1 zonelists. Total pages: 1212415 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c074a000 soft=c072a000 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 4145376k/4849660k available (2092k kernel code, 45952k reserved, 873k data, 228k init, 3275160k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0, 0 hpet0: 4 64-bit timers, 14318180 Hz Using HPET for base-timer Calibrating delay using timer specific routine.. 4258.49 BogoMIPS (lpj=2129248) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20060707 CPU0: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz stepping 0b SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c074b000 soft=c072b000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4256.00 BogoMIPS (lpj=2128003) CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz stepping 0b SMP alternatives: switching to SMP code Booting processor 2/2 eip 3000 CPU 2 irqstacks, hard=c074c000 soft=c072c000 Initializing CPU#2 Calibrating delay using timer specific routine.. 4256.01 BogoMIPS (lpj=2128006) CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#2. CPU2: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz stepping 0b SMP alternatives: switching to SMP code Booting processor 3/3 eip 3000 CPU 3 irqstacks, hard=c074d000 soft=c072d000 Initializing CPU#3 Calibrating delay using timer specific routine.. 4256.00 BogoMIPS (lpj=2128003) CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#3. CPU3: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz stepping 0b Total of 4 processors activated (17026.52 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 4 CPUs: passed. Brought up 4 CPUs sizeof(vma)=88 bytes sizeof(page)=32 bytes sizeof(inode)=340 bytes sizeof(dentry)=136 bytes sizeof(ext3inode)=492 bytes sizeof(buffer_head)=52 bytes sizeof(skbuff)=172 bytes migration_cost=30,3467 checking if image is initramfs... it is Freeing initrd memory: 3063k freed NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: PCI BIOS revision 3.00 entry at 0xf0072, last bus=26 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:02.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHE.BCME._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPE2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPE3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPE4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPE5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG2._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *7 10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 *11) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Device 0000:00:00.0 not found by BIOS NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:01: ioport range 0x408-0x40f has been reserved pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved PCI: Bridge: 0000:00:01.0 IO window: 4000-4fff MEM window: fde00000-fdffffff PREFETCH window: e0000000-e00fffff PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:02:00.0 IO window: disabled. MEM window: fdd00000-fddfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: fdd00000-fddfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.5 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 2000-3fff MEM window: fdb00000-fdcfffff PREFETCH window: d8000000-dfffffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:06.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:02:00.0 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1c.3 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.4 to 64 ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 193 PCI: Setting latency timer of device 0000:00:1c.5 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1232443781.372:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key D1F27370ACBC602E - User ID: CentOS (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:06.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:06.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] PCI: Setting latency timer of device 0000:00:1c.5 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.5:pcie00] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x4 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x5 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x6 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x7 ACPI: Thermal Zone [THM0] (8 C) Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... Probing IDE interface ide1... ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode ACPI: (supports S0 S4 S5) Freeing unused kernel memory: 228k freed Write protecting the kernel read-only data: 392k Time: tsc clocksource has been installed. input: AT Translated Set 2 keyboard as /class/input/input0 logips2pp: Detected unknown logitech mouse model 1 input: ImExPS/2 Logitech Explorer Mouse as /class/input/input1 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 74 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 74, io mem 0xfdaf0000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 74 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 74, io base 0x00001000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 74 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 74, io base 0x00001020 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 74 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 74, io base 0x00001040 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 21 (level, low) -> IRQ 74 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 74, io base 0x00001060 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 23 (level, low) -> IRQ 82 uhci_hcd 0000:01:04.4: UHCI Host Controller uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 6 uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports uhci_hcd 0000:01:04.4: irq 82, io base 0x00003800 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected SCSI subsystem initialized HP CISS Driver (v 3.6.20-RH1) ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 169 cciss0: <0x3230> at PCI 0000:15:00.0 IRQ 106 using DAC blocks= 20481600 block_size= 512 heads= 255, sectors= 32, cylinders= 2510 blocks= 20481600 block_size= 512 heads= 255, sectors= 32, cylinders= 2510 cciss/c0d0: p1 p2 libata version 3.00 loaded. ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 20 (level, low) -> IRQ 122 PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x1080 ctl 0x1088 bmdma 0x10a0 irq 122 ata2: SATA max UDMA/133 cmd 0x1090 ctl 0x1098 bmdma 0x10a8 irq 122 usb 6-1: new full speed USB device using uhci_hcd and address 2 usb 6-1: configuration #1 chosen from 1 choice input: HP Virtual Keyboard as /class/input/input2 input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1 input: HP Virtual Keyboard as /class/input/input3 input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 20 (level, low) -> IRQ 122 PCI: Setting latency timer of device 0000:00:1f.5 to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0x10c0 ctl 0x10c8 bmdma 0x10e0 irq 122 ata4: SATA max UDMA/133 cmd 0x10d0 ctl 0x10d8 bmdma 0x10e8 irq 122 usb 6-2: new full speed USB device using uhci_hcd and address 3 usb 6-2: configuration #1 chosen from 1 choice hub 6-2:1.0: USB hub found hub 6-2:1.0: 7 ports detected ata3.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-M10N, 2.02, max UDMA/33 ata3.00: applying bridge limits ata3.00: configured for UDMA/33 Vendor: HL-DT-ST Model: RW/DVD GCC-M10N Rev: 2.02 Type: CD-ROM ANSI SCSI revision: 05 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1232443787.726:2): selinux=0 auid=4294967295 ses=4294967295 input: PC Speaker as /class/input/input4 Floppy drive(s): fd0 is 1.44M tg3.c:v3.86 (November 9, 2007) ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 16 (level, low) -> IRQ 169 eth0: Tigon3 [partno(N/A) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:1f:29:bd:58:5c eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76148000] dma_mask[64-bit] ACPI: PCI Interrupt 0000:03:04.1[B] -> GSI 17 (level, low) -> IRQ 193 eth1: Tigon3 [partno(N/A) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:1f:29:bd:58:5d eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth1: dma_rwctrl[76148000] dma_mask[64-bit] scsi 2:0:0:0: Attached scsi generic sg0 type 5 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 floppy0: no floppy controllers found Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found lp: driver loaded but no devices found NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver mtrr: type mismatch for d8000000,2000000 old: uncachable new: write-combining ACPI: Power Button (FF) [PWRF] ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d0p1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k IA-32 Microcode Update Driver: v1.14a microcode: CPU1 updated from revision 0xb3 to 0xb6, date = 07132007 microcode: CPU3 updated from revision 0xb3 to 0xb6, date = 07132007 microcode: CPU2 updated from revision 0xb3 to 0xb6, date = 07132007 microcode: CPU0 updated from revision 0xb3 to 0xb6, date = 07132007 ADDRCONF(NETDEV_UP): eth0: link is not ready tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is off for TX and off for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Bluetooth: Core ver 2.10 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: HIDP (Human Interface Emulation) ver 1.1 eth0: no IPv6 routers present mtrr: type mismatch for d8000000,2000000 old: uncachable new: write-combining