Jan 20 10:26:46 lccmay8 syslogd 1.4.1: restart. Jan 20 10:26:47 lccmay8 syslog: syslogd startup succeeded Jan 20 10:26:47 lccmay8 syslog: klogd startup succeeded Jan 20 10:26:47 lccmay8 kernel: klogd 1.4.1, log source = /proc/kmsg started. Jan 20 10:26:47 lccmay8 kernel: Linux version 2.6.9-78.ELsmp (mockbuild@builder16.centos.org) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-10)) #1 SMP Fri Jul 25 00:04:28 EDT 2008 Jan 20 10:26:47 lccmay8 kernel: BIOS-provided physical RAM map: Jan 20 10:26:47 lccmay8 kernel: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) Jan 20 10:26:47 lccmay8 kernel: BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) Jan 20 10:26:47 lccmay8 kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Jan 20 10:26:47 lccmay8 kernel: BIOS-e820: 0000000000100000 - 00000000d7e66000 (usable) Jan 20 10:26:47 lccmay8 kernel: BIOS-e820: 00000000d7e66000 - 00000000d7e6e000 (ACPI data) Jan 20 10:26:47 lccmay8 kernel: BIOS-e820: 00000000d7e6e000 - 00000000d7e6f000 (usable) Jan 20 10:26:47 lccmay8 kernel: BIOS-e820: 00000000d7e6f000 - 00000000d8000000 (reserved) Jan 20 10:26:47 lccmay8 kernel: BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) Jan 20 10:26:47 lccmay8 kernel: BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) Jan 20 10:26:47 lccmay8 irqbalance: irqbalance startup succeeded Jan 20 10:26:47 lccmay8 kernel: BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) Jan 20 10:26:47 lccmay8 kernel: BIOS-e820: 0000000100000000 - 0000000127fff000 (usable) Jan 20 10:26:47 lccmay8 kernel: 3839MB HIGHMEM available. Jan 20 10:26:47 lccmay8 portmap: portmap startup succeeded Jan 20 10:26:47 lccmay8 kernel: 896MB LOWMEM available. Jan 20 10:26:47 lccmay8 kernel: found SMP MP-table at 000f4f80 Jan 20 10:26:47 lccmay8 kernel: Using x86 segment limits to approximate NX protection Jan 20 10:26:47 lccmay8 rpc.statd[24254]: Version 1.0.6 Starting Jan 20 10:26:48 lccmay8 nfslock: rpc.statd startup succeeded Jan 20 10:26:48 lccmay8 kernel: DMI 2.4 present. Jan 20 10:26:48 lccmay8 kernel: Using APIC driver default Jan 20 10:26:49 lccmay8 rpcidmapd: rpc.idmapd startup succeeded Jan 20 10:26:49 lccmay8 netfs: Mounting other filesystems: succeeded Jan 20 10:26:49 lccmay8 kernel: ServerWorks chipset detected. Disabling timer routing over 8254. Jan 20 10:26:49 lccmay8 kernel: ACPI: PM-Timer IO Port: 0x908 Jan 20 10:26:49 lccmay8 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Jan 20 10:26:49 lccmay8 kernel: Processor #0 6:15 APIC version 20 Jan 20 10:26:49 lccmay8 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) Jan 20 10:26:49 lccmay8 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) Jan 20 19:26:20 lccmay8 rc.sysinit: -e Jan 20 10:26:49 lccmay8 kernel: Processor #2 6:15 APIC version 20 Jan 20 10:26:20 lccmay8 date: 2009年 1月 20日 火曜日 10:26:20 JST Jan 20 10:26:49 lccmay8 kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) Jan 20 10:26:49 lccmay8 autofs: automount startup succeeded Jan 20 10:26:20 lccmay8 rc.sysinit: Setting clock (localtime): 2009年 1月 20日 火曜日 10:26:20 JST succeeded Jan 20 10:26:49 lccmay8 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Jan 20 10:26:20 lccmay8 udevsend[1206]: starting udevd daemon Jan 20 10:26:49 lccmay8 kernel: Processor #1 6:15 APIC version 20 Jan 20 10:26:20 lccmay8 scsi.agent[1218]: cdrom at /devices/pci0000:00/0000:00:1f.5/host2/target2:0:0/2:0:0:0 Jan 20 10:26:49 lccmay8 kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) Jan 20 10:26:23 lccmay8 start_udev: Starting udev: succeeded Jan 20 10:26:50 lccmay8 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) Jan 20 10:26:24 lccmay8 udevsend[3531]: starting udevd daemon Jan 20 10:26:50 lccmay8 kernel: Processor #3 6:15 APIC version 20 Jan 20 10:26:24 lccmay8 udevsend[3532]: starting udevd daemon Jan 20 10:26:50 lccmay8 kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) Jan 20 10:26:28 lccmay8 rc.sysinit: -e Jan 20 10:26:50 lccmay8 kernel: ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) Jan 20 10:26:29 lccmay8 sysctl: net.ipv4.ip_forward = 0 Jan 20 10:26:51 lccmay8 kernel: Enabling APIC mode: Flat. Using 0 I/O APICs Jan 20 10:26:29 lccmay8 sysctl: net.ipv4.conf.default.rp_filter = 1 Jan 20 10:26:51 lccmay8 kernel: ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) Jan 20 10:26:29 lccmay8 sysctl: net.ipv4.conf.default.accept_source_route = 0 Jan 20 10:26:51 lccmay8 kernel: IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 Jan 20 10:26:29 lccmay8 sysctl: kernel.sysrq = 0 Jan 20 10:26:51 lccmay8 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) Jan 20 10:26:29 lccmay8 sysctl: kernel.core_uses_pid = 1 Jan 20 10:26:51 lccmay8 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Jan 20 10:26:29 lccmay8 rc.sysinit: Configuring kernel parameters: succeeded Jan 20 10:26:29 lccmay8 rc.sysinit: Loading default keymap succeeded Jan 20 10:26:29 lccmay8 rc.sysinit: Setting hostname lccmay8.jpn.hp.com: succeeded Jan 20 10:26:29 lccmay8 fsck: /: clean, 112796/91029504 files, 3428826/182034523 blocks Jan 20 10:26:52 lccmay8 kernel: ACPI: HPET id: 0x10228201 base: 0xfed00000 Jan 20 10:26:29 lccmay8 rc.sysinit: Checking root filesystem succeeded Jan 20 10:26:52 lccmay8 kernel: Using ACPI (MADT) for SMP configuration information Jan 20 10:26:29 lccmay8 rc.sysinit: Remounting root filesystem in read-write mode: succeeded Jan 20 10:26:52 lccmay8 kernel: Allocating PCI resources starting at dc000000 (gap: d8000000:26c00000) Jan 20 10:26:30 lccmay8 rc.sysinit: Setting up Logical Volume Management: succeeded Jan 20 10:26:52 lccmay8 kernel: Built 1 zonelists Jan 20 10:26:30 lccmay8 fsck: /boot: clean, 40/76304 files, 26370/305200 blocks Jan 20 10:26:52 lccmay8 kernel: Kernel command line: ro root=LABEL=/ rhgb quiet 3 Jan 20 10:26:52 lccmay8 smartd[27215]: smartd version 5.33 [i686-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Jan 20 10:26:30 lccmay8 rc.sysinit: Checking filesystems succeeded Jan 20 10:26:52 lccmay8 smartd[27215]: Home page is http://smartmontools.sourceforge.net/ Jan 20 10:26:30 lccmay8 rc.sysinit: Mounting local filesystems: succeeded Jan 20 10:26:52 lccmay8 kernel: Initializing CPU#0 Jan 20 10:26:52 lccmay8 smartd[27215]: Opened configuration file /etc/smartd.conf Jan 20 10:26:30 lccmay8 rc.sysinit: Enabling local filesystem quotas: succeeded Jan 20 10:26:53 lccmay8 kernel: CPU 0 irqstacks, hard=c0403000 soft=c03e3000 Jan 20 10:26:53 lccmay8 smartd[27215]: Configuration file /etc/smartd.conf parsed but has no entries (like /dev/hda) Jan 20 10:26:30 lccmay8 rc.sysinit: Enabling swap space: succeeded Jan 20 10:26:53 lccmay8 kernel: PID hash table entries: 4096 (order: 12, 65536 bytes) Jan 20 10:26:53 lccmay8 smartd[27215]: Unable to monitor any SMART enabled devices. Try debug (-d) option. Exiting... Jan 20 10:26:30 lccmay8 init: Entering runlevel: 3 Jan 20 10:26:53 lccmay8 kernel: Console: colour VGA+ 80x25 Jan 20 10:26:53 lccmay8 smartd: smartd startup failed Jan 20 10:26:31 lccmay8 microcode_ctl: microcode_ctl startup succeeded Jan 20 10:26:53 lccmay8 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Jan 20 10:26:53 lccmay8 acpid: acpid startup succeeded Jan 20 10:26:40 lccmay8 kudzu: succeeded Jan 20 10:26:53 lccmay8 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Jan 20 10:26:41 lccmay8 rc: Starting pcmcia: succeeded Jan 20 10:26:54 lccmay8 kernel: Memory: 4147240k/4849660k available (1925k kernel code, 44416k reserved, 787k data, 192k init, 3275160k highmem) Jan 20 10:26:41 lccmay8 sysctl: net.ipv4.ip_forward = 0 Jan 20 10:26:54 lccmay8 kernel: Using HPET for base-timer Jan 20 10:26:41 lccmay8 sysctl: net.ipv4.conf.default.rp_filter = 1 Jan 20 10:26:54 lccmay8 kernel: Using HPET for gettimeofday Jan 20 10:26:41 lccmay8 sysctl: net.ipv4.conf.default.accept_source_route = 0 Jan 20 10:26:54 lccmay8 kernel: Detected 2128.092 MHz processor. Jan 20 10:26:41 lccmay8 sysctl: kernel.sysrq = 0 Jan 20 10:26:55 lccmay8 kernel: Using hpet for high-res timesource Jan 20 10:26:41 lccmay8 sysctl: kernel.core_uses_pid = 1 Jan 20 10:26:55 lccmay8 kernel: Calibrating delay using timer specific routine.. 4258.67 BogoMIPS (lpj=2129336) Jan 20 10:26:41 lccmay8 network: Setting network parameters: succeeded Jan 20 10:26:55 lccmay8 kernel: Security Scaffold v1.0.0 initialized Jan 20 10:26:41 lccmay8 network: Bringing up loopback interface: succeeded Jan 20 10:26:55 lccmay8 kernel: SELinux: Initializing. Jan 20 10:26:46 lccmay8 network: Bringing up interface eth0: succeeded Jan 20 10:26:56 lccmay8 kernel: selinux_register_security: Registering secondary module capability Jan 20 10:26:56 lccmay8 kernel: Capability LSM initialized as secondary Jan 20 10:26:56 lccmay8 kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Jan 20 10:26:57 lccmay8 kernel: monitor/mwait feature present. Jan 20 10:26:57 lccmay8 kernel: using mwait in idle threads. Jan 20 10:26:57 lccmay8 cups: cupsd startup succeeded Jan 20 10:26:57 lccmay8 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K Jan 20 10:26:57 lccmay8 kernel: CPU: L2 cache: 4096K Jan 20 10:26:57 lccmay8 kernel: CPU0: Physical Processor ID: 0 Jan 20 10:26:57 lccmay8 sshd: RSA1 key generation succeeded Jan 20 10:26:57 lccmay8 kernel: CPU0: Processor Core ID: 0 Jan 20 10:26:57 lccmay8 sshd: RSA key generation succeeded Jan 20 10:26:57 lccmay8 kernel: CPU0: Initial APIC ID: 0 Jan 20 10:26:57 lccmay8 kernel: Intel machine check architecture supported. Jan 20 10:26:57 lccmay8 kernel: Intel machine check reporting enabled on CPU#0. Jan 20 10:26:58 lccmay8 kernel: Enabling fast FPU save and restore... done. Jan 20 10:26:58 lccmay8 kernel: Enabling unmasked SIMD FPU exception support... done. Jan 20 10:26:58 lccmay8 kernel: Checking 'hlt' instruction... OK. Jan 20 10:26:58 lccmay8 kernel: CPU0: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz stepping 0b Jan 20 10:26:58 lccmay8 kernel: per-CPU timeslice cutoff: 11701.44 usecs. Jan 20 10:26:58 lccmay8 kernel: task migration cache decay timeout: 11 msecs. Jan 20 10:26:58 lccmay8 kernel: Booting processor 1/1 eip 3000 Jan 20 10:26:58 lccmay8 kernel: CPU 1 irqstacks, hard=c0404000 soft=c03e4000 Jan 20 10:26:58 lccmay8 kernel: Initializing CPU#1 Jan 20 10:26:58 lccmay8 kernel: Calibrating delay using timer specific routine.. 4255.97 BogoMIPS (lpj=2127985) Jan 20 10:26:58 lccmay8 kernel: monitor/mwait feature present. Jan 20 10:26:58 lccmay8 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K Jan 20 10:26:58 lccmay8 kernel: CPU: L2 cache: 4096K Jan 20 10:26:58 lccmay8 kernel: CPU1: Physical Processor ID: 0 Jan 20 10:26:58 lccmay8 kernel: CPU1: Processor Core ID: 1 Jan 20 10:26:58 lccmay8 kernel: CPU1: Initial APIC ID: 1 Jan 20 10:26:58 lccmay8 kernel: Intel machine check architecture supported. Jan 20 10:26:58 lccmay8 kernel: Intel machine check reporting enabled on CPU#1. Jan 20 10:26:58 lccmay8 kernel: CPU1: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz stepping 0b Jan 20 10:26:59 lccmay8 kernel: Booting processor 2/2 eip 3000 Jan 20 10:26:59 lccmay8 kernel: CPU 2 irqstacks, hard=c0405000 soft=c03e5000 Jan 20 10:26:59 lccmay8 kernel: Initializing CPU#2 Jan 20 10:26:59 lccmay8 kernel: Calibrating delay using timer specific routine.. 4256.15 BogoMIPS (lpj=2128076) Jan 20 10:26:59 lccmay8 kernel: monitor/mwait feature present. Jan 20 10:26:59 lccmay8 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K Jan 20 10:26:59 lccmay8 kernel: CPU: L2 cache: 4096K Jan 20 10:26:59 lccmay8 kernel: CPU2: Physical Processor ID: 0 Jan 20 10:26:59 lccmay8 kernel: CPU2: Processor Core ID: 2 Jan 20 10:26:59 lccmay8 kernel: CPU2: Initial APIC ID: 2 Jan 20 10:26:59 lccmay8 kernel: Intel machine check architecture supported. Jan 20 10:26:59 lccmay8 kernel: Intel machine check reporting enabled on CPU#2. Jan 20 10:26:59 lccmay8 kernel: CPU2: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz stepping 0b Jan 20 10:26:59 lccmay8 kernel: Booting processor 3/3 eip 3000 Jan 20 10:26:59 lccmay8 kernel: CPU 3 irqstacks, hard=c0406000 soft=c03e6000 Jan 20 10:26:59 lccmay8 kernel: Initializing CPU#3 Jan 20 10:26:59 lccmay8 kernel: Calibrating delay using timer specific routine.. 4272.69 BogoMIPS (lpj=2136345) Jan 20 10:26:59 lccmay8 kernel: monitor/mwait feature present. Jan 20 10:26:59 lccmay8 sshd: DSA key generation succeeded Jan 20 10:26:59 lccmay8 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K Jan 20 10:26:59 lccmay8 kernel: CPU: L2 cache: 4096K Jan 20 10:26:59 lccmay8 kernel: CPU3: Physical Processor ID: 0 Jan 20 10:26:59 lccmay8 kernel: CPU3: Processor Core ID: 3 Jan 20 10:26:59 lccmay8 kernel: CPU3: Initial APIC ID: 3 Jan 20 10:27:00 lccmay8 sshd: succeeded Jan 20 10:27:00 lccmay8 kernel: Intel machine check architecture supported. Jan 20 10:27:00 lccmay8 kernel: Intel machine check reporting enabled on CPU#3. Jan 20 10:27:00 lccmay8 kernel: CPU3: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz stepping 0b Jan 20 10:27:00 lccmay8 xinetd: xinetd startup succeeded Jan 20 10:27:00 lccmay8 kernel: Total of 4 processors activated (17043.48 BogoMIPS). Jan 20 10:27:00 lccmay8 kernel: ENABLING IO-APIC IRQs Jan 20 10:27:00 lccmay8 kernel: ..TIMER: vector=0x31 pin1=2 pin2=-1 Jan 20 10:27:00 lccmay8 kernel: checking TSC synchronization across 4 CPUs: passed. Jan 20 10:27:01 lccmay8 kernel: Brought up 4 CPUs Jan 20 10:27:01 lccmay8 kernel: zapping low mappings. Jan 20 10:27:01 lccmay8 kernel: checking if image is initramfs... it is Jan 20 10:27:01 lccmay8 kernel: Freeing initrd memory: 722k freed Jan 20 10:27:01 lccmay8 kernel: NET: Registered protocol family 16 Jan 20 10:27:01 lccmay8 kernel: PCI: PCI BIOS revision 3.00 entry at 0xf0072, last bus=26 Jan 20 10:27:01 lccmay8 kernel: PCI: Using MMCONFIG Jan 20 10:27:02 lccmay8 kernel: mtrr: v2.0 (20020519) Jan 20 10:27:02 lccmay8 kernel: ACPI: Subsystem revision 20040816 Jan 20 10:27:02 lccmay8 kernel: ACPI: Interpreter enabled Jan 20 10:27:02 lccmay8 kernel: ACPI: Using IOAPIC for interrupt routing Jan 20 10:27:02 lccmay8 kernel: ACPI: PCI Root Bridge [PCI0] (00:00) Jan 20 10:27:02 lccmay8 kernel: PCI: Probing PCI hardware (bus 00) Jan 20 10:27:02 lccmay8 kernel: PCI: Transparent bridge - 0000:00:1e.0 Jan 20 10:27:02 lccmay8 sendmail: sendmail startup succeeded Jan 20 10:27:02 lccmay8 sendmail: sm-client startup succeeded Jan 20 10:27:04 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11) Jan 20 10:27:04 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 *10 11) Jan 20 10:27:04 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled. Jan 20 10:27:04 lccmay8 gpm[27382]: *** info [startup.c(95)]: Jan 20 10:27:04 lccmay8 gpm[27382]: Started gpm successfully. Entered daemon mode. Jan 20 10:27:04 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled. Jan 20 10:27:04 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *7 10 11) Jan 20 10:27:04 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11) Jan 20 10:27:04 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11) Jan 20 10:27:04 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 *11) Jan 20 10:27:04 lccmay8 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay Jan 20 10:27:04 lccmay8 kernel: xen_mem: Initialising balloon driver. Jan 20 10:27:04 lccmay8 kernel: usbcore: registered new driver usbfs Jan 20 10:27:04 lccmay8 gpm[27382]: *** info [mice.c(1766)]: Jan 20 10:27:04 lccmay8 gpm[27382]: imps2: Auto-detected intellimouse PS/2 Jan 20 10:27:04 lccmay8 kernel: usbcore: registered new driver hub Jan 20 10:27:04 lccmay8 gpm: gpm startup succeeded Jan 20 10:27:04 lccmay8 kernel: PCI: Using ACPI for IRQ routing Jan 20 10:27:04 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 Jan 20 10:27:04 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169 Jan 20 10:27:05 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 Jan 20 10:27:05 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 177 Jan 20 10:27:05 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 185 Jan 20 10:27:05 lccmay8 iiim: htt startup succeeded Jan 20 10:27:05 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169 Jan 20 10:27:05 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 193 Jan 20 10:27:05 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 201 Jan 20 10:27:06 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 201 Jan 20 10:27:06 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 201 Jan 20 10:27:06 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 21 (level, low) -> IRQ 201 Jan 20 10:27:06 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 201 Jan 20 10:27:06 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 20 (level, low) -> IRQ 209 Jan 20 10:27:06 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 20 (level, low) -> IRQ 209 Jan 20 10:27:06 lccmay8 htt_server[27414]: started. Jan 20 10:27:06 lccmay8 kernel: ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 169 Jan 20 10:27:06 lccmay8 kernel: ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 16 (level, low) -> IRQ 169 Jan 20 10:27:06 lccmay8 kernel: ACPI: PCI Interrupt 0000:03:04.1[B] -> GSI 17 (level, low) -> IRQ 193 Jan 20 10:27:06 lccmay8 kernel: ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 21 (level, low) -> IRQ 201 Jan 20 10:27:06 lccmay8 xinetd[27343]: xinetd Version 2.3.13 started with libwrap loadavg options compiled in. Jan 20 10:27:06 lccmay8 kernel: ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 22 (level, low) -> IRQ 217 Jan 20 10:27:06 lccmay8 xinetd[27343]: Started working: 0 available services Jan 20 10:27:06 lccmay8 kernel: ACPI: PCI Interrupt 0000:01:04.2[B] -> GSI 23 (level, low) -> IRQ 225 Jan 20 10:27:06 lccmay8 kernel: ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 23 (level, low) -> IRQ 225 Jan 20 10:27:06 lccmay8 kernel: ACPI: PCI Interrupt 0000:01:04.6[A] -> GSI 22 (level, low) -> IRQ 217 Jan 20 10:27:06 lccmay8 kernel: PCI: Device 00:00 not found by BIOS Jan 20 10:27:06 lccmay8 kernel: apm: BIOS not found. Jan 20 10:27:06 lccmay8 kernel: audit: initializing netlink socket (disabled) Jan 20 10:27:06 lccmay8 kernel: audit(1232447173.875:1): initialized Jan 20 10:27:07 lccmay8 kernel: highmem bounce pool size: 64 pages Jan 20 10:27:07 lccmay8 kernel: Total HugeTLB memory allocated, 0 Jan 20 10:27:07 lccmay8 kernel: VFS: Disk quotas dquot_6.5.1 Jan 20 10:27:07 lccmay8 kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jan 20 10:27:07 lccmay8 kernel: Initializing Cryptographic API Jan 20 10:27:07 lccmay8 kernel: ksign: Installing public key data Jan 20 10:27:07 lccmay8 kernel: Loading keyring Jan 20 10:27:07 lccmay8 kernel: - Added public key 546A4C2153FB685E Jan 20 10:27:07 lccmay8 kernel: - User ID: CentOS (Kernel Module GPG key) Jan 20 10:27:07 lccmay8 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Jan 20 10:27:07 lccmay8 kernel: ACPI: Processor [CPU0] (supports C1) Jan 20 10:27:07 lccmay8 kernel: ACPI: Processor [CPU1] (supports C1) Jan 20 10:27:07 lccmay8 kernel: ACPI: Processor [CPU2] (supports C1) Jan 20 10:27:07 lccmay8 kernel: ACPI: Processor [CPU3] (supports C1) Jan 20 10:27:07 lccmay8 kernel: ACPI: Thermal Zone [THM0] (8 C) Jan 20 10:27:08 lccmay8 kernel: Real Time Clock Driver v1.12 Jan 20 10:27:08 lccmay8 kernel: Linux agpgart interface v0.100 (c) Dave Jones Jan 20 10:27:08 lccmay8 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 Jan 20 10:27:08 lccmay8 canna: succeeded Jan 20 10:27:08 lccmay8 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Jan 20 10:27:08 lccmay8 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled Jan 20 10:27:08 lccmay8 crond: crond startup succeeded Jan 20 10:27:08 lccmay8 kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Jan 20 10:27:08 lccmay8 kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Jan 20 10:27:08 lccmay8 kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Jan 20 10:27:08 lccmay8 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Jan 20 10:27:08 lccmay8 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Jan 20 10:27:09 lccmay8 kernel: ide-floppy driver 0.99.newide Jan 20 10:27:09 lccmay8 kernel: usbcore: registered new driver hiddev Jan 20 10:27:10 lccmay8 kernel: usbcore: registered new driver usbhid Jan 20 10:27:10 lccmay8 kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver Jan 20 10:27:10 lccmay8 kernel: mice: PS/2 mouse device common for all mice Jan 20 10:27:10 lccmay8 kernel: input: AT Translated Set 2 keyboard on isa0060/serio0 Jan 20 10:27:10 lccmay8 kernel: input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1 Jan 20 10:27:10 lccmay8 kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 Jan 20 10:27:10 lccmay8 kernel: NET: Registered protocol family 2 Jan 20 10:27:10 lccmay8 kernel: IP route cache hash table entries: 262144 (order: 8, 1048576 bytes) Jan 20 10:27:10 lccmay8 kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes) Jan 20 10:27:10 lccmay8 kernel: TCP bind hash table entries: 262144 (order: 9, 3145728 bytes) Jan 20 10:27:10 lccmay8 kernel: TCP: Hash tables configured (established 262144 bind 262144) Jan 20 10:27:10 lccmay8 kernel: Initializing IPsec netlink socket Jan 20 10:27:10 lccmay8 kernel: NET: Registered protocol family 1 Jan 20 10:27:10 lccmay8 kernel: NET: Registered protocol family 17 Jan 20 10:27:10 lccmay8 kernel: ACPI wakeup devices: Jan 20 10:27:10 lccmay8 kernel: Jan 20 10:27:10 lccmay8 kernel: ACPI: (supports S0 S4 S5) Jan 20 10:27:11 lccmay8 kernel: Freeing unused kernel memory: 192k freed Jan 20 10:27:11 lccmay8 kernel: SCSI subsystem initialized Jan 20 10:27:11 lccmay8 kernel: HP CISS Driver (v 2.6.20.RH1) Jan 20 10:27:11 lccmay8 kernel: ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 169 Jan 20 10:27:11 lccmay8 kernel: MSI INIT SUCCESS Jan 20 10:27:11 lccmay8 kernel: cciss: using DAC cycles Jan 20 10:27:11 lccmay8 kernel: blocks= 1465083631 block_size= 512 Jan 20 10:27:11 lccmay8 kernel: heads= 255, sectors= 32, cylinders= 179545 Jan 20 10:27:11 lccmay8 kernel: Jan 20 10:27:12 lccmay8 kernel: Using cfq io scheduler Jan 20 10:27:12 lccmay8 kernel: blocks= 1465083631 block_size= 512 Jan 20 10:27:12 lccmay8 kernel: heads= 255, sectors= 32, cylinders= 179545 Jan 20 10:27:12 lccmay8 kernel: Jan 20 10:27:12 lccmay8 kernel: cciss/c0d0: p1 p2 p3 Jan 20 10:27:12 lccmay8 kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] Jan 20 10:27:12 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 20 (level, low) -> IRQ 209 Jan 20 10:27:13 lccmay8 kernel: ata1: SATA max UDMA/133 cmd 0x1080 ctl 0x108A bmdma 0x10A0 irq 209 Jan 20 10:27:13 lccmay8 kernel: ata2: SATA max UDMA/133 cmd 0x1090 ctl 0x109A bmdma 0x10A8 irq 209 Jan 20 10:27:13 lccmay8 kernel: scsi0 : ata_piix Jan 20 10:27:13 lccmay8 kernel: scsi1 : ata_piix Jan 20 10:27:13 lccmay8 kernel: ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] Jan 20 10:27:13 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 20 (level, low) -> IRQ 209 Jan 20 10:27:13 lccmay8 kernel: ata3: SATA max UDMA/133 cmd 0x10C0 ctl 0x10CA bmdma 0x10E0 irq 209 Jan 20 10:27:13 lccmay8 kernel: ata4: SATA max UDMA/133 cmd 0x10D0 ctl 0x10DA bmdma 0x10E8 irq 209 Jan 20 10:27:13 lccmay8 kernel: scsi2 : ata_piix Jan 20 10:27:14 lccmay8 kernel: ata3.00: ATAPI, max UDMA/33 Jan 20 10:27:14 lccmay8 kernel: ata3.00: applying bridge limits Jan 20 10:27:14 lccmay8 kernel: ata3.00: configured for UDMA/33 Jan 20 10:27:14 lccmay8 kernel: scsi3 : ata_piix Jan 20 10:27:14 lccmay8 kernel: Vendor: HL-DT-ST Model: RW/DVD GCC-M10N Rev: 2.02 Jan 20 10:27:14 lccmay8 kernel: Type: CD-ROM ANSI SCSI revision: 05 Jan 20 10:27:14 lccmay8 kernel: kjournald starting. Commit interval 5 seconds Jan 20 10:27:14 lccmay8 kernel: EXT3-fs: mounted filesystem with ordered data mode. Jan 20 10:27:14 lccmay8 kernel: SELinux: Disabled at runtime. Jan 20 10:27:14 lccmay8 kernel: sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Jan 20 10:27:14 lccmay8 kernel: Uniform CD-ROM driver Revision: 3.20 Jan 20 10:27:15 lccmay8 kernel: inserting floppy driver for 2.6.9-78.ELsmp Jan 20 10:27:15 lccmay8 kernel: Floppy drive(s): fd0 is 1.44M Jan 20 10:27:15 lccmay8 kernel: floppy0: no floppy controllers found Jan 20 10:27:15 lccmay8 kernel: tg3.c:v3.86 (November 9, 2007) Jan 20 10:27:15 lccmay8 kernel: ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 16 (level, low) -> IRQ 169 Jan 20 10:27:15 lccmay8 kernel: eth0: Tigon3 [partno(N/A) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:1f:29:bd:58:5c Jan 20 10:27:15 lccmay8 kernel: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1] Jan 20 10:27:16 lccmay8 kernel: eth0: dma_rwctrl[76148000] dma_mask[64-bit] Jan 20 10:27:16 lccmay8 kernel: ACPI: PCI Interrupt 0000:03:04.1[B] -> GSI 17 (level, low) -> IRQ 193 Jan 20 10:27:16 lccmay8 kernel: eth1: Tigon3 [partno(N/A) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:1f:29:bd:58:5d Jan 20 10:27:16 lccmay8 kernel: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] Jan 20 10:27:16 lccmay8 kernel: eth1: dma_rwctrl[76148000] dma_mask[64-bit] Jan 20 10:27:16 lccmay8 kernel: hw_random: cannot enable RNG, aborting Jan 20 10:27:16 lccmay8 kernel: USB Universal Host Controller Interface driver v2.2 Jan 20 10:27:16 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 201 Jan 20 10:27:16 lccmay8 kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller Jan 20 10:27:16 lccmay8 kernel: uhci_hcd 0000:00:1d.0: irq 201, io base 00001000 Jan 20 10:27:17 lccmay8 kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 Jan 20 10:27:17 lccmay8 kernel: hub 1-0:1.0: USB hub found Jan 20 10:27:17 lccmay8 kernel: hub 1-0:1.0: 2 ports detected Jan 20 10:27:17 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 201 Jan 20 10:27:17 lccmay8 kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller Jan 20 10:27:17 lccmay8 kernel: uhci_hcd 0000:00:1d.1: irq 201, io base 00001020 Jan 20 10:27:17 lccmay8 kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 Jan 20 10:27:17 lccmay8 kernel: hub 2-0:1.0: USB hub found Jan 20 10:27:17 lccmay8 kernel: hub 2-0:1.0: 2 ports detected Jan 20 10:27:17 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 201 Jan 20 10:27:17 lccmay8 kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller Jan 20 10:27:18 lccmay8 kernel: uhci_hcd 0000:00:1d.2: irq 201, io base 00001040 Jan 20 10:27:18 lccmay8 kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 Jan 20 10:27:18 lccmay8 kernel: hub 3-0:1.0: USB hub found Jan 20 10:27:18 lccmay8 kernel: hub 3-0:1.0: 2 ports detected Jan 20 10:27:18 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 21 (level, low) -> IRQ 201 Jan 20 10:27:18 lccmay8 kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller Jan 20 10:27:18 lccmay8 kernel: uhci_hcd 0000:00:1d.3: irq 201, io base 00001060 Jan 20 10:27:18 lccmay8 kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 Jan 20 10:27:19 lccmay8 kernel: hub 4-0:1.0: USB hub found Jan 20 10:27:19 lccmay8 kernel: hub 4-0:1.0: 2 ports detected Jan 20 10:27:19 lccmay8 kernel: ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 23 (level, low) -> IRQ 225 Jan 20 10:27:19 lccmay8 kernel: uhci_hcd 0000:01:04.4: UHCI Host Controller Jan 20 10:27:19 lccmay8 kernel: uhci_hcd 0000:01:04.4: irq 225, io base 00003800 Jan 20 10:27:19 lccmay8 kernel: uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 5 Jan 20 10:27:19 lccmay8 kernel: uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports Jan 20 10:27:19 lccmay8 kernel: hub 5-0:1.0: USB hub found Jan 20 10:27:19 lccmay8 kernel: hub 5-0:1.0: 2 ports detected Jan 20 10:27:19 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 201 Jan 20 10:27:19 lccmay8 kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller Jan 20 10:27:20 lccmay8 kernel: ehci_hcd 0000:00:1d.7: irq 201, pci mem f8820000 Jan 20 10:27:20 lccmay8 kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6 Jan 20 10:27:20 lccmay8 kernel: ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 Jan 20 10:27:20 lccmay8 kernel: hub 6-0:1.0: USB hub found Jan 20 10:27:20 lccmay8 kernel: hub 6-0:1.0: 8 ports detected Jan 20 10:27:20 lccmay8 kernel: md: Autodetecting RAID arrays. Jan 20 10:27:20 lccmay8 kernel: md: autorun ... Jan 20 10:27:20 lccmay8 kernel: md: ... autorun DONE. Jan 20 10:27:21 lccmay8 kernel: usb 5-1: new full speed USB device using address 2 Jan 20 10:27:21 lccmay8 kernel: input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1 Jan 20 10:27:21 lccmay8 kernel: input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1 Jan 20 10:27:21 lccmay8 kernel: usb 5-2: new full speed USB device using address 3 Jan 20 10:27:21 lccmay8 kernel: hub 5-2:1.0: USB hub found Jan 20 10:27:21 lccmay8 kernel: hub 5-2:1.0: 7 ports detected Jan 20 10:27:21 lccmay8 kernel: ACPI: Power Button (FF) [PWRF] Jan 20 10:27:21 lccmay8 kernel: EXT3 FS on cciss/c0d0p3, internal journal Jan 20 10:27:21 lccmay8 kernel: device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com Jan 20 10:27:21 lccmay8 kernel: kjournald starting. Commit interval 5 seconds Jan 20 10:27:21 lccmay8 kernel: EXT3 FS on cciss/c0d0p1, internal journal Jan 20 10:27:21 lccmay8 kernel: EXT3-fs: mounted filesystem with ordered data mode. Jan 20 10:27:22 lccmay8 kernel: Adding 4096564k swap on /dev/cciss/c0d0p2. Priority:-1 extents:1 Jan 20 10:27:22 lccmay8 kernel: IA-32 Microcode Update Driver: v1.14 Jan 20 10:27:22 lccmay8 kernel: microcode: CPU1 updated from revision 0xb3 to 0xb6, date = 07132007 Jan 20 10:27:22 lccmay8 kernel: microcode: CPU2 updated from revision 0xb3 to 0xb6, date = 07132007 Jan 20 10:27:22 lccmay8 kernel: microcode: CPU3 updated from revision 0xb3 to 0xb6, date = 07132007 Jan 20 10:27:22 lccmay8 kernel: microcode: CPU0 updated from revision 0xb3 to 0xb6, date = 07132007 Jan 20 10:27:22 lccmay8 kernel: IA-32 Microcode Update Driver v1.14 unregistered Jan 20 10:27:22 lccmay8 kernel: ip_tables: (C) 2000-2002 Netfilter core team Jan 20 10:27:22 lccmay8 kernel: ip_tables: (C) 2000-2002 Netfilter core team Jan 20 10:27:22 lccmay8 kernel: tg3: eth0: Link is up at 100 Mbps, full duplex. Jan 20 10:27:23 lccmay8 kernel: tg3: eth0: Flow control is off for TX and off for RX. Jan 20 10:27:23 lccmay8 kernel: lp: driver loaded but no devices found Jan 20 10:27:23 lccmay8 kernel: NET: Registered protocol family 10 Jan 20 10:27:23 lccmay8 kernel: Disabled Privacy Extensions on device c0353520(lo) Jan 20 10:27:23 lccmay8 kernel: IPv6 over IPv4 tunneling driver Jan 20 10:27:26 lccmay8 xfs: xfs startup succeeded Jan 20 10:27:26 lccmay8 anacron: anacron startup succeeded Jan 20 10:27:26 lccmay8 atd: atd startup succeeded Jan 20 10:27:26 lccmay8 atd: succeeded Jan 20 10:27:33 lccmay8 firstboot: succeeded Jan 20 10:27:34 lccmay8 messagebus: messagebus startup succeeded Jan 20 10:27:34 lccmay8 cups-config-daemon: cups-config-daemon startup succeeded Jan 20 10:27:34 lccmay8 haldaemon: haldaemon startup succeeded Jan 20 10:27:34 lccmay8 fstab-sync[28003]: removed all generated mount points Jan 20 10:27:34 lccmay8 fstab-sync[28115]: added mount point /media/cdrecorder for /dev/scd0 Jan 20 10:27:46 lccmay8 login(pam_unix)[27540]: session opened for user root by LOGIN(uid=0) Jan 20 10:27:46 lccmay8 -- root[27540]: ROOT LOGIN ON tty1 Jan 20 10:27:59 lccmay8 shutdown: shutting down for system reboot Jan 20 10:27:59 lccmay8 init: Switching to runlevel: 6 Jan 20 10:27:59 lccmay8 login(pam_unix)[27540]: session closed for user root Jan 20 10:28:00 lccmay8 cups-config-daemon: cups-config-daemon -TERM succeeded Jan 20 10:28:00 lccmay8 haldaemon: haldaemon -TERM succeeded Jan 20 10:28:00 lccmay8 messagebus: messagebus -TERM succeeded Jan 20 10:28:00 lccmay8 atd: atd shutdown succeeded Jan 20 10:28:00 lccmay8 cups: cupsd shutdown succeeded Jan 20 10:28:01 lccmay8 xfs[27460]: terminating Jan 20 10:28:01 lccmay8 xfs: xfs shutdown succeeded Jan 20 10:28:01 lccmay8 cannaserver[27426]: irw_killserver:cannaserver end Jan 20 10:28:01 lccmay8 canna: Stopping Canna server: succeeded Jan 20 10:28:01 lccmay8 gpm: gpm shutdown succeeded Jan 20 10:28:01 lccmay8 sshd: sshd shutdown succeeded Jan 20 10:28:01 lccmay8 sendmail: sm-client shutdown succeeded Jan 20 10:28:01 lccmay8 sendmail: sendmail shutdown succeeded Jan 20 10:28:01 lccmay8 smartd: smartd shutdown failed Jan 20 10:28:01 lccmay8 xinetd[27343]: Exiting... Jan 20 10:28:01 lccmay8 xinetd: xinetd shutdown succeeded Jan 20 10:28:01 lccmay8 acpid: acpid shutdown succeeded Jan 20 10:28:02 lccmay8 crond: crond shutdown succeeded Jan 20 10:28:02 lccmay8 autofs: Stopping automount: Jan 20 10:28:02 lccmay8 autofs: automount shutdown succeeded Jan 20 10:28:02 lccmay8 autofs:  Jan 20 10:28:02 lccmay8 autofs: Jan 20 10:28:02 lccmay8 rc: Stopping autofs: succeeded Jan 20 10:28:02 lccmay8 rpc.statd[24254]: Caught signal 15, un-registering and exiting. Jan 20 10:28:02 lccmay8 portmap[28858]: connect from 127.0.0.1 to unset(status): request from unprivileged port Jan 20 10:28:02 lccmay8 nfslock: rpc.statd shutdown succeeded Jan 20 10:28:03 lccmay8 irqbalance: irqbalance shutdown succeeded Jan 20 10:28:03 lccmay8 portmap: portmap shutdown succeeded Jan 20 10:28:03 lccmay8 kernel: Kernel logging (proc) stopped. Jan 20 10:28:03 lccmay8 kernel: Kernel log daemon terminating. Jan 20 10:28:04 lccmay8 syslog: klogd shutdown succeeded Jan 20 10:28:04 lccmay8 exiting on signal 15 Jan 20 10:30:09 lccmay8 syslogd 1.4.1: restart. Jan 20 10:30:09 lccmay8 syslog: syslogd 起動 succeeded Jan 20 10:30:09 lccmay8 syslog: klogd 起動 succeeded Jan 20 10:30:09 lccmay8 kernel: klogd 1.4.1, log source = /proc/kmsg started. Jan 20 10:30:09 lccmay8 kernel: Linux version 2.6.9-78.ELsmp (mockbuild@builder16.centos.org) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-10)) #1 SMP Fri Jul 25 00:04:28 EDT 2008 Jan 20 10:30:09 lccmay8 kernel: BIOS-provided physical RAM map: Jan 20 10:30:09 lccmay8 kernel: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) Jan 20 10:30:09 lccmay8 kernel: BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) Jan 20 10:30:09 lccmay8 kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Jan 20 10:30:09 lccmay8 kernel: BIOS-e820: 0000000000100000 - 00000000d7e66000 (usable) Jan 20 10:30:09 lccmay8 kernel: BIOS-e820: 00000000d7e66000 - 00000000d7e6e000 (ACPI data) Jan 20 10:30:09 lccmay8 kernel: BIOS-e820: 00000000d7e6e000 - 00000000d7e6f000 (usable) Jan 20 10:30:09 lccmay8 kernel: BIOS-e820: 00000000d7e6f000 - 00000000d8000000 (reserved) Jan 20 10:30:09 lccmay8 kernel: BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) Jan 20 10:30:09 lccmay8 kernel: BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) Jan 20 10:30:09 lccmay8 irqbalance: irqbalance 起動 succeeded Jan 20 10:30:09 lccmay8 kernel: BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) Jan 20 10:30:09 lccmay8 kernel: BIOS-e820: 0000000100000000 - 0000000127fff000 (usable) Jan 20 10:30:09 lccmay8 portmap: portmap 起動 succeeded Jan 20 10:30:09 lccmay8 kernel: 3839MB HIGHMEM available. Jan 20 10:30:09 lccmay8 kernel: 896MB LOWMEM available. Jan 20 10:30:09 lccmay8 rpc.statd[27069]: Version 1.0.6 Starting Jan 20 10:30:09 lccmay8 kernel: found SMP MP-table at 000f4f80 Jan 20 10:30:10 lccmay8 kernel: Using x86 segment limits to approximate NX protection Jan 20 10:30:10 lccmay8 nfslock: rpc.statd 起動 succeeded Jan 20 10:30:11 lccmay8 kernel: DMI 2.4 present. Jan 20 10:30:11 lccmay8 kernel: Using APIC driver default Jan 20 10:30:11 lccmay8 rpcidmapd: rpc.idmapd 起動 succeeded Jan 20 10:30:11 lccmay8 netfs: 他のファイルシステムをマウント中: succeeded Jan 20 19:29:37 lccmay8 rc.sysinit: -e Jan 20 10:29:37 lccmay8 date: 2009年 1月 20日 火曜日 10:29:37 JST Jan 20 10:29:37 lccmay8 rc.sysinit: Setting clock (localtime): 2009年 1月 20日 火曜日 10:29:37 JST succeeded Jan 20 10:30:11 lccmay8 autofs: automount startup succeeded Jan 20 10:29:37 lccmay8 udevsend[1210]: starting udevd daemon Jan 20 10:29:37 lccmay8 scsi.agent[1222]: cdrom at /devices/pci0000:00/0000:00:1f.5/host2/target2:0:0/2:0:0:0 Jan 20 10:29:40 lccmay8 start_udev: Starting udev: succeeded Jan 20 10:29:41 lccmay8 udevsend[3538]: starting udevd daemon Jan 20 10:30:12 lccmay8 smartd[27176]: smartd version 5.33 [i686-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Jan 20 10:29:41 lccmay8 udevsend[3537]: starting udevd daemon Jan 20 10:30:12 lccmay8 smartd[27176]: Home page is http://smartmontools.sourceforge.net/ Jan 20 10:29:41 lccmay8 udevsend[3539]: starting udevd daemon Jan 20 10:30:12 lccmay8 smartd[27176]: Opened configuration file /etc/smartd.conf Jan 20 10:29:45 lccmay8 rc.sysinit: -e Jan 20 10:30:12 lccmay8 smartd[27176]: Configuration file /etc/smartd.conf parsed but has no entries (like /dev/hda) Jan 20 10:30:12 lccmay8 kernel: ServerWorks chipset detected. Disabling timer routing over 8254. Jan 20 10:29:51 lccmay8 sysctl: net.ipv4.ip_forward = 0 Jan 20 10:30:12 lccmay8 smartd[27176]: Unable to monitor any SMART enabled devices. Try debug (-d) option. Exiting... Jan 20 10:30:12 lccmay8 kernel: ACPI: PM-Timer IO Port: 0x908 Jan 20 10:29:51 lccmay8 sysctl: net.ipv4.conf.default.rp_filter = 1 Jan 20 10:30:12 lccmay8 smartd: smartd 起動 failed Jan 20 10:29:51 lccmay8 sysctl: net.ipv4.conf.default.accept_source_route = 0 Jan 20 10:30:12 lccmay8 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Jan 20 10:30:12 lccmay8 acpid: acpid 起動 succeeded Jan 20 10:29:51 lccmay8 sysctl: kernel.sysrq = 0 Jan 20 10:30:13 lccmay8 kernel: Processor #0 6:15 APIC version 20 Jan 20 10:29:51 lccmay8 sysctl: kernel.core_uses_pid = 1 Jan 20 10:30:13 lccmay8 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) Jan 20 10:29:51 lccmay8 rc.sysinit: Configuring kernel parameters: succeeded Jan 20 10:30:13 lccmay8 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) Jan 20 10:29:51 lccmay8 rc.sysinit: Loading default keymap succeeded Jan 20 10:30:13 lccmay8 kernel: Processor #2 6:15 APIC version 20 Jan 20 10:29:51 lccmay8 rc.sysinit: Setting hostname lccmay8.jpn.hp.com: succeeded Jan 20 10:30:14 lccmay8 kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) Jan 20 10:29:51 lccmay8 rc.sysinit: Checking root filesystem succeeded Jan 20 10:30:14 lccmay8 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Jan 20 10:29:51 lccmay8 rc.sysinit: Remounting root filesystem in read-write mode: succeeded Jan 20 10:30:14 lccmay8 kernel: Processor #1 6:15 APIC version 20 Jan 20 10:29:51 lccmay8 rc.sysinit: Setting up Logical Volume Management: succeeded Jan 20 10:30:15 lccmay8 kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) Jan 20 10:29:52 lccmay8 rc.sysinit: Checking filesystems succeeded Jan 20 10:30:15 lccmay8 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) Jan 20 10:29:52 lccmay8 rc.sysinit: Mounting local filesystems: succeeded Jan 20 10:30:15 lccmay8 kernel: Processor #3 6:15 APIC version 20 Jan 20 10:29:52 lccmay8 rc.sysinit: Enabling local filesystem quotas: succeeded Jan 20 10:30:15 lccmay8 kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) Jan 20 10:29:52 lccmay8 rc.sysinit: Enabling swap space: succeeded Jan 20 10:30:16 lccmay8 kernel: ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) Jan 20 10:29:52 lccmay8 init: Entering runlevel: 5 Jan 20 10:30:16 lccmay8 kernel: Enabling APIC mode: Flat. Using 0 I/O APICs Jan 20 10:29:53 lccmay8 microcode_ctl: microcode_ctl 起動 succeeded Jan 20 10:30:16 lccmay8 kernel: ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) Jan 20 10:29:53 lccmay8 readahead_early: readahead をバックグランドで起動中: Jan 20 10:30:16 lccmay8 kernel: IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 Jan 20 10:29:53 lccmay8 rc: readahead_early を起動中: succeeded Jan 20 10:30:17 lccmay8 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) Jan 20 10:30:03 lccmay8 kudzu: succeeded Jan 20 10:30:17 lccmay8 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Jan 20 10:30:03 lccmay8 rc: pcmcia を起動中: succeeded Jan 20 10:30:17 lccmay8 cups: cupsd 起動 succeeded Jan 20 10:30:03 lccmay8 sysctl: net.ipv4.ip_forward = 0 Jan 20 10:30:03 lccmay8 sysctl: net.ipv4.conf.default.rp_filter = 1 Jan 20 10:30:17 lccmay8 sshd: succeeded Jan 20 10:30:03 lccmay8 sysctl: net.ipv4.conf.default.accept_source_route = 0 Jan 20 10:30:18 lccmay8 xinetd: xinetd 起動 succeeded Jan 20 10:30:18 lccmay8 kernel: ACPI: HPET id: 0x10228201 base: 0xfed00000 Jan 20 10:30:03 lccmay8 sysctl: kernel.sysrq = 0 Jan 20 10:30:18 lccmay8 kernel: Using ACPI (MADT) for SMP configuration information Jan 20 10:30:03 lccmay8 sysctl: kernel.core_uses_pid = 1 Jan 20 10:30:18 lccmay8 kernel: Allocating PCI resources starting at dc000000 (gap: d8000000:26c00000) Jan 20 10:30:03 lccmay8 network: ネットワークパラメーターを設定中: succeeded Jan 20 10:30:19 lccmay8 kernel: Built 1 zonelists Jan 20 10:30:03 lccmay8 network: ループバックインターフェイスを呼び込み中 succeeded Jan 20 10:30:09 lccmay8 network: インターフェース eth0 を活性化中: succeeded Jan 20 10:30:19 lccmay8 kernel: Kernel command line: ro root=LABEL=/ rhgb quiet Jan 20 10:30:19 lccmay8 sendmail: sendmail 起動 succeeded Jan 20 10:30:19 lccmay8 kernel: Initializing CPU#0 Jan 20 10:30:19 lccmay8 sendmail: sm-client 起動 succeeded Jan 20 10:30:19 lccmay8 kernel: CPU 0 irqstacks, hard=c0403000 soft=c03e3000 Jan 20 10:30:20 lccmay8 gpm[27291]: *** info [startup.c(95)]: Jan 20 10:30:20 lccmay8 kernel: PID hash table entries: 4096 (order: 12, 65536 bytes) Jan 20 10:30:20 lccmay8 gpm[27291]: Started gpm successfully. Entered daemon mode. Jan 20 10:30:20 lccmay8 kernel: Console: colour VGA+ 80x25 Jan 20 10:30:20 lccmay8 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Jan 20 10:30:20 lccmay8 gpm[27291]: *** info [mice.c(1766)]: Jan 20 10:30:20 lccmay8 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Jan 20 10:30:20 lccmay8 gpm[27291]: imps2: Auto-detected intellimouse PS/2 Jan 20 10:30:20 lccmay8 kernel: Memory: 4147240k/4849660k available (1925k kernel code, 44416k reserved, 787k data, 192k init, 3275160k highmem) Jan 20 10:30:20 lccmay8 gpm: gpm 起動 succeeded Jan 20 10:30:20 lccmay8 kernel: Using HPET for base-timer Jan 20 10:30:20 lccmay8 kernel: Using HPET for gettimeofday Jan 20 10:30:20 lccmay8 kernel: Detected 2128.153 MHz processor. Jan 20 10:30:20 lccmay8 kernel: Using hpet for high-res timesource Jan 20 10:30:20 lccmay8 kernel: Calibrating delay using timer specific routine.. 4258.69 BogoMIPS (lpj=2129348) Jan 20 10:30:21 lccmay8 kernel: Security Scaffold v1.0.0 initialized Jan 20 10:30:21 lccmay8 iiim: htt 起動 succeeded Jan 20 10:30:21 lccmay8 kernel: SELinux: Initializing. Jan 20 10:30:21 lccmay8 kernel: selinux_register_security: Registering secondary module capability Jan 20 10:30:21 lccmay8 kernel: Capability LSM initialized as secondary Jan 20 10:30:21 lccmay8 kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Jan 20 10:30:22 lccmay8 htt_server[27323]: started. Jan 20 10:30:22 lccmay8 kernel: monitor/mwait feature present. Jan 20 10:30:22 lccmay8 kernel: using mwait in idle threads. Jan 20 10:30:22 lccmay8 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K Jan 20 10:30:22 lccmay8 kernel: CPU: L2 cache: 4096K Jan 20 10:30:22 lccmay8 kernel: CPU0: Physical Processor ID: 0 Jan 20 10:30:22 lccmay8 kernel: CPU0: Processor Core ID: 0 Jan 20 10:30:22 lccmay8 kernel: CPU0: Initial APIC ID: 0 Jan 20 10:30:22 lccmay8 kernel: Intel machine check architecture supported. Jan 20 10:30:22 lccmay8 kernel: Intel machine check reporting enabled on CPU#0. Jan 20 10:30:22 lccmay8 xinetd[27252]: xinetd Version 2.3.13 started with libwrap loadavg options compiled in. Jan 20 10:30:22 lccmay8 kernel: Enabling fast FPU save and restore... done. Jan 20 10:30:22 lccmay8 xinetd[27252]: Started working: 0 available services Jan 20 10:30:22 lccmay8 kernel: Enabling unmasked SIMD FPU exception support... done. Jan 20 10:30:22 lccmay8 kernel: Checking 'hlt' instruction... OK. Jan 20 10:30:22 lccmay8 kernel: CPU0: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz stepping 0b Jan 20 10:30:23 lccmay8 kernel: per-CPU timeslice cutoff: 11701.44 usecs. Jan 20 10:30:23 lccmay8 kernel: task migration cache decay timeout: 11 msecs. Jan 20 10:30:23 lccmay8 kernel: Booting processor 1/1 eip 3000 Jan 20 10:30:23 lccmay8 kernel: CPU 1 irqstacks, hard=c0404000 soft=c03e4000 Jan 20 10:30:23 lccmay8 kernel: Initializing CPU#1 Jan 20 10:30:23 lccmay8 kernel: Calibrating delay using timer specific routine.. 4256.05 BogoMIPS (lpj=2128029) Jan 20 10:30:23 lccmay8 kernel: monitor/mwait feature present. Jan 20 10:30:23 lccmay8 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K Jan 20 10:30:23 lccmay8 kernel: CPU: L2 cache: 4096K Jan 20 10:30:23 lccmay8 kernel: CPU1: Physical Processor ID: 0 Jan 20 10:30:23 lccmay8 kernel: CPU1: Processor Core ID: 1 Jan 20 10:30:23 lccmay8 kernel: CPU1: Initial APIC ID: 1 Jan 20 10:30:23 lccmay8 kernel: Intel machine check architecture supported. Jan 20 10:30:23 lccmay8 kernel: Intel machine check reporting enabled on CPU#1. Jan 20 10:30:23 lccmay8 kernel: CPU1: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz stepping 0b Jan 20 10:30:24 lccmay8 kernel: Booting processor 2/2 eip 3000 Jan 20 10:30:24 lccmay8 kernel: CPU 2 irqstacks, hard=c0405000 soft=c03e5000 Jan 20 10:30:24 lccmay8 kernel: Initializing CPU#2 Jan 20 10:30:24 lccmay8 kernel: Calibrating delay using timer specific routine.. 4256.08 BogoMIPS (lpj=2128040) Jan 20 10:30:24 lccmay8 canna: succeeded Jan 20 10:30:24 lccmay8 crond: crond 起動 succeeded Jan 20 10:30:24 lccmay8 kernel: monitor/mwait feature present. Jan 20 10:30:24 lccmay8 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K Jan 20 10:30:24 lccmay8 kernel: CPU: L2 cache: 4096K Jan 20 10:30:24 lccmay8 kernel: CPU2: Physical Processor ID: 0 Jan 20 10:30:24 lccmay8 kernel: CPU2: Processor Core ID: 2 Jan 20 10:30:24 lccmay8 kernel: CPU2: Initial APIC ID: 2 Jan 20 10:30:24 lccmay8 kernel: Intel machine check architecture supported. Jan 20 10:30:24 lccmay8 kernel: Intel machine check reporting enabled on CPU#2. Jan 20 10:30:24 lccmay8 kernel: CPU2: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz stepping 0b Jan 20 10:30:24 lccmay8 kernel: Booting processor 3/3 eip 3000 Jan 20 10:30:24 lccmay8 kernel: CPU 3 irqstacks, hard=c0406000 soft=c03e6000 Jan 20 10:30:26 lccmay8 xfs: xfs 起動 succeeded Jan 20 10:30:26 lccmay8 kernel: Initializing CPU#3 Jan 20 10:30:26 lccmay8 kernel: Calibrating delay using timer specific routine.. 4256.04 BogoMIPS (lpj=2128022) Jan 20 10:30:26 lccmay8 anacron: anacron 起動 succeeded Jan 20 10:30:26 lccmay8 kernel: monitor/mwait feature present. Jan 20 10:30:26 lccmay8 atd: atd 起動 succeeded Jan 20 10:30:26 lccmay8 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K Jan 20 10:30:26 lccmay8 atd: succeeded Jan 20 10:30:26 lccmay8 kernel: CPU: L2 cache: 4096K Jan 20 10:30:27 lccmay8 kernel: CPU3: Physical Processor ID: 0 Jan 20 10:30:27 lccmay8 readahead: readahead をバックグランドで起動中: Jan 20 10:30:27 lccmay8 kernel: CPU3: Processor Core ID: 3 Jan 20 10:30:27 lccmay8 kernel: CPU3: Initial APIC ID: 3 Jan 20 10:30:27 lccmay8 kernel: Intel machine check architecture supported. Jan 20 10:30:27 lccmay8 rc: readahead を起動中: succeeded Jan 20 10:30:27 lccmay8 kernel: Intel machine check reporting enabled on CPU#3. Jan 20 10:30:28 lccmay8 kernel: CPU3: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz stepping 0b Jan 20 10:30:28 lccmay8 kernel: Total of 4 processors activated (17026.87 BogoMIPS). Jan 20 10:30:28 lccmay8 messagebus: messagebus 起動 succeeded Jan 20 10:30:28 lccmay8 kernel: ENABLING IO-APIC IRQs Jan 20 10:30:28 lccmay8 kernel: ..TIMER: vector=0x31 pin1=2 pin2=-1 Jan 20 10:30:29 lccmay8 cups-config-daemon: cups-config-daemon 起動 succeeded Jan 20 10:30:29 lccmay8 kernel: checking TSC synchronization across 4 CPUs: passed. Jan 20 10:30:29 lccmay8 kernel: Brought up 4 CPUs Jan 20 10:30:29 lccmay8 kernel: zapping low mappings. Jan 20 10:30:29 lccmay8 haldaemon: haldaemon 起動 succeeded Jan 20 10:30:29 lccmay8 kernel: checking if image is initramfs... it is Jan 20 10:30:30 lccmay8 kernel: Freeing initrd memory: 722k freed Jan 20 10:30:30 lccmay8 kernel: NET: Registered protocol family 16 Jan 20 10:30:30 lccmay8 kernel: PCI: PCI BIOS revision 3.00 entry at 0xf0072, last bus=26 Jan 20 10:30:30 lccmay8 kernel: PCI: Using MMCONFIG Jan 20 10:30:30 lccmay8 fstab-sync[28080]: removed all generated mount points Jan 20 10:30:30 lccmay8 kernel: mtrr: v2.0 (20020519) Jan 20 10:30:31 lccmay8 kernel: ACPI: Subsystem revision 20040816 Jan 20 10:30:31 lccmay8 fstab-sync[28306]: added mount point /media/cdrecorder for /dev/scd0 Jan 20 10:30:31 lccmay8 kernel: ACPI: Interpreter enabled Jan 20 10:30:31 lccmay8 kernel: ACPI: Using IOAPIC for interrupt routing Jan 20 10:30:31 lccmay8 kernel: ACPI: PCI Root Bridge [PCI0] (00:00) Jan 20 10:30:31 lccmay8 kernel: PCI: Probing PCI hardware (bus 00) Jan 20 10:30:32 lccmay8 kernel: PCI: Transparent bridge - 0000:00:1e.0 Jan 20 10:30:33 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11) Jan 20 10:30:33 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 *10 11) Jan 20 10:30:33 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled. Jan 20 10:30:33 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled. Jan 20 10:30:33 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *7 10 11) Jan 20 10:30:33 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11) Jan 20 10:30:33 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11) Jan 20 10:30:33 lccmay8 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 *11) Jan 20 10:30:33 lccmay8 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay Jan 20 10:30:33 lccmay8 kernel: xen_mem: Initialising balloon driver. Jan 20 10:30:33 lccmay8 kernel: usbcore: registered new driver usbfs Jan 20 10:30:33 lccmay8 kernel: usbcore: registered new driver hub Jan 20 10:30:33 lccmay8 kernel: PCI: Using ACPI for IRQ routing Jan 20 10:30:33 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 Jan 20 10:30:33 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169 Jan 20 10:30:34 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 Jan 20 10:30:34 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 177 Jan 20 10:30:34 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 185 Jan 20 10:30:34 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169 Jan 20 10:30:34 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 193 Jan 20 10:30:34 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 201 Jan 20 10:30:34 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 201 Jan 20 10:30:34 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 201 Jan 20 10:30:34 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 21 (level, low) -> IRQ 201 Jan 20 10:30:35 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 201 Jan 20 10:30:35 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 20 (level, low) -> IRQ 209 Jan 20 10:30:35 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 20 (level, low) -> IRQ 209 Jan 20 10:30:35 lccmay8 kernel: ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 169 Jan 20 10:30:35 lccmay8 kernel: ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 16 (level, low) -> IRQ 169 Jan 20 10:30:35 lccmay8 kernel: ACPI: PCI Interrupt 0000:03:04.1[B] -> GSI 17 (level, low) -> IRQ 193 Jan 20 10:30:35 lccmay8 kernel: ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 21 (level, low) -> IRQ 201 Jan 20 10:30:35 lccmay8 kernel: ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 22 (level, low) -> IRQ 217 Jan 20 10:30:35 lccmay8 kernel: ACPI: PCI Interrupt 0000:01:04.2[B] -> GSI 23 (level, low) -> IRQ 225 Jan 20 10:30:35 lccmay8 kernel: ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 23 (level, low) -> IRQ 225 Jan 20 10:30:36 lccmay8 kernel: ACPI: PCI Interrupt 0000:01:04.6[A] -> GSI 22 (level, low) -> IRQ 217 Jan 20 10:30:36 lccmay8 kernel: PCI: Device 00:00 not found by BIOS Jan 20 10:30:36 lccmay8 kernel: apm: BIOS not found. Jan 20 10:30:36 lccmay8 kernel: audit: initializing netlink socket (disabled) Jan 20 10:30:36 lccmay8 kernel: audit(1232447370.844:1): initialized Jan 20 10:30:36 lccmay8 kernel: highmem bounce pool size: 64 pages Jan 20 10:30:36 lccmay8 kernel: Total HugeTLB memory allocated, 0 Jan 20 10:30:36 lccmay8 kernel: VFS: Disk quotas dquot_6.5.1 Jan 20 10:30:36 lccmay8 kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jan 20 10:30:36 lccmay8 kernel: Initializing Cryptographic API Jan 20 10:30:36 lccmay8 kernel: ksign: Installing public key data Jan 20 10:30:36 lccmay8 kernel: Loading keyring Jan 20 10:30:36 lccmay8 kernel: - Added public key 546A4C2153FB685E Jan 20 10:30:36 lccmay8 kernel: - User ID: CentOS (Kernel Module GPG key) Jan 20 10:30:36 lccmay8 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Jan 20 10:30:37 lccmay8 kernel: ACPI: Processor [CPU0] (supports C1) Jan 20 10:30:37 lccmay8 kernel: ACPI: Processor [CPU1] (supports C1) Jan 20 10:30:37 lccmay8 kernel: ACPI: Processor [CPU2] (supports C1) Jan 20 10:30:37 lccmay8 kernel: ACPI: Processor [CPU3] (supports C1) Jan 20 10:30:37 lccmay8 kernel: ACPI: Thermal Zone [THM0] (8 C) Jan 20 10:30:37 lccmay8 kernel: Real Time Clock Driver v1.12 Jan 20 10:30:37 lccmay8 kernel: Linux agpgart interface v0.100 (c) Dave Jones Jan 20 10:30:37 lccmay8 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 Jan 20 10:30:37 lccmay8 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Jan 20 10:30:37 lccmay8 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled Jan 20 10:30:37 lccmay8 kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Jan 20 10:30:37 lccmay8 kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Jan 20 10:30:37 lccmay8 kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Jan 20 10:30:37 lccmay8 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Jan 20 10:30:37 lccmay8 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Jan 20 10:30:38 lccmay8 kernel: ide-floppy driver 0.99.newide Jan 20 10:30:38 lccmay8 kernel: usbcore: registered new driver hiddev Jan 20 10:30:38 lccmay8 kernel: usbcore: registered new driver usbhid Jan 20 10:30:38 lccmay8 kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver Jan 20 10:30:38 lccmay8 kernel: mice: PS/2 mouse device common for all mice Jan 20 10:30:38 lccmay8 kernel: input: AT Translated Set 2 keyboard on isa0060/serio0 Jan 20 10:30:38 lccmay8 kernel: input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1 Jan 20 10:30:38 lccmay8 kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 Jan 20 10:30:38 lccmay8 kernel: NET: Registered protocol family 2 Jan 20 10:30:38 lccmay8 kernel: IP route cache hash table entries: 262144 (order: 8, 1048576 bytes) Jan 20 10:30:38 lccmay8 kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes) Jan 20 10:30:38 lccmay8 kernel: TCP bind hash table entries: 262144 (order: 9, 3145728 bytes) Jan 20 10:30:38 lccmay8 kernel: TCP: Hash tables configured (established 262144 bind 262144) Jan 20 10:30:38 lccmay8 kernel: Initializing IPsec netlink socket Jan 20 10:30:38 lccmay8 kernel: NET: Registered protocol family 1 Jan 20 10:30:38 lccmay8 kernel: NET: Registered protocol family 17 Jan 20 10:30:38 lccmay8 kernel: ACPI wakeup devices: Jan 20 10:30:38 lccmay8 kernel: Jan 20 10:30:38 lccmay8 kernel: ACPI: (supports S0 S4 S5) Jan 20 10:30:38 lccmay8 kernel: Freeing unused kernel memory: 192k freed Jan 20 10:30:38 lccmay8 kernel: SCSI subsystem initialized Jan 20 10:30:38 lccmay8 kernel: HP CISS Driver (v 2.6.20.RH1) Jan 20 10:30:38 lccmay8 kernel: ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 169 Jan 20 10:30:38 lccmay8 kernel: MSI INIT SUCCESS Jan 20 10:30:38 lccmay8 kernel: cciss: using DAC cycles Jan 20 10:30:38 lccmay8 kernel: blocks= 1465083631 block_size= 512 Jan 20 10:30:38 lccmay8 kernel: heads= 255, sectors= 32, cylinders= 179545 Jan 20 10:30:38 lccmay8 kernel: Jan 20 10:30:38 lccmay8 kernel: Using cfq io scheduler Jan 20 10:30:39 lccmay8 kernel: blocks= 1465083631 block_size= 512 Jan 20 10:30:39 lccmay8 kernel: heads= 255, sectors= 32, cylinders= 179545 Jan 20 10:30:39 lccmay8 kernel: Jan 20 10:30:39 lccmay8 kernel: cciss/c0d0: p1 p2 p3 Jan 20 10:30:39 lccmay8 kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] Jan 20 10:30:39 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 20 (level, low) -> IRQ 209 Jan 20 10:30:39 lccmay8 kernel: ata1: SATA max UDMA/133 cmd 0x1080 ctl 0x108A bmdma 0x10A0 irq 209 Jan 20 10:30:39 lccmay8 kernel: ata2: SATA max UDMA/133 cmd 0x1090 ctl 0x109A bmdma 0x10A8 irq 209 Jan 20 10:30:39 lccmay8 kernel: scsi0 : ata_piix Jan 20 10:30:39 lccmay8 kernel: scsi1 : ata_piix Jan 20 10:30:39 lccmay8 kernel: ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] Jan 20 10:30:39 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 20 (level, low) -> IRQ 209 Jan 20 10:30:39 lccmay8 kernel: ata3: SATA max UDMA/133 cmd 0x10C0 ctl 0x10CA bmdma 0x10E0 irq 209 Jan 20 10:30:39 lccmay8 kernel: ata4: SATA max UDMA/133 cmd 0x10D0 ctl 0x10DA bmdma 0x10E8 irq 209 Jan 20 10:30:39 lccmay8 kernel: scsi2 : ata_piix Jan 20 10:30:39 lccmay8 kernel: ata3.00: ATAPI, max UDMA/33 Jan 20 10:30:39 lccmay8 kernel: ata3.00: applying bridge limits Jan 20 10:30:39 lccmay8 kernel: ata3.00: configured for UDMA/33 Jan 20 10:30:39 lccmay8 kernel: scsi3 : ata_piix Jan 20 10:30:39 lccmay8 kernel: Vendor: HL-DT-ST Model: RW/DVD GCC-M10N Rev: 2.02 Jan 20 10:30:39 lccmay8 kernel: Type: CD-ROM ANSI SCSI revision: 05 Jan 20 10:30:39 lccmay8 kernel: kjournald starting. Commit interval 5 seconds Jan 20 10:30:39 lccmay8 kernel: EXT3-fs: mounted filesystem with ordered data mode. Jan 20 10:30:40 lccmay8 kernel: SELinux: Disabled at runtime. Jan 20 10:30:40 lccmay8 kernel: sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Jan 20 10:30:41 lccmay8 kernel: Uniform CD-ROM driver Revision: 3.20 Jan 20 10:30:41 lccmay8 kernel: inserting floppy driver for 2.6.9-78.ELsmp Jan 20 10:30:41 lccmay8 kernel: Floppy drive(s): fd0 is 1.44M Jan 20 10:30:41 lccmay8 kernel: floppy0: no floppy controllers found Jan 20 10:30:41 lccmay8 kernel: tg3.c:v3.86 (November 9, 2007) Jan 20 10:30:41 lccmay8 kernel: ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 16 (level, low) -> IRQ 169 Jan 20 10:30:41 lccmay8 kernel: eth0: Tigon3 [partno(N/A) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:1f:29:bd:58:5c Jan 20 10:30:41 lccmay8 kernel: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1] Jan 20 10:30:41 lccmay8 kernel: eth0: dma_rwctrl[76148000] dma_mask[64-bit] Jan 20 10:30:41 lccmay8 kernel: ACPI: PCI Interrupt 0000:03:04.1[B] -> GSI 17 (level, low) -> IRQ 193 Jan 20 10:30:41 lccmay8 kernel: eth1: Tigon3 [partno(N/A) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:1f:29:bd:58:5d Jan 20 10:30:41 lccmay8 kernel: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] Jan 20 10:30:41 lccmay8 kernel: eth1: dma_rwctrl[76148000] dma_mask[64-bit] Jan 20 10:30:41 lccmay8 kernel: hw_random: cannot enable RNG, aborting Jan 20 10:30:41 lccmay8 kernel: USB Universal Host Controller Interface driver v2.2 Jan 20 10:30:41 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 201 Jan 20 10:30:41 lccmay8 kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller Jan 20 10:30:41 lccmay8 kernel: uhci_hcd 0000:00:1d.0: irq 201, io base 00001000 Jan 20 10:30:41 lccmay8 kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 Jan 20 10:30:41 lccmay8 kernel: hub 1-0:1.0: USB hub found Jan 20 10:30:41 lccmay8 kernel: hub 1-0:1.0: 2 ports detected Jan 20 10:30:41 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 201 Jan 20 10:30:41 lccmay8 kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller Jan 20 10:30:41 lccmay8 kernel: uhci_hcd 0000:00:1d.1: irq 201, io base 00001020 Jan 20 10:30:41 lccmay8 kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 Jan 20 10:30:41 lccmay8 kernel: hub 2-0:1.0: USB hub found Jan 20 10:30:41 lccmay8 kernel: hub 2-0:1.0: 2 ports detected Jan 20 10:30:42 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 201 Jan 20 10:30:42 lccmay8 kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller Jan 20 10:30:42 lccmay8 kernel: uhci_hcd 0000:00:1d.2: irq 201, io base 00001040 Jan 20 10:30:42 lccmay8 kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 Jan 20 10:30:42 lccmay8 kernel: hub 3-0:1.0: USB hub found Jan 20 10:30:42 lccmay8 kernel: hub 3-0:1.0: 2 ports detected Jan 20 10:30:42 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 21 (level, low) -> IRQ 201 Jan 20 10:30:42 lccmay8 kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller Jan 20 10:30:42 lccmay8 kernel: uhci_hcd 0000:00:1d.3: irq 201, io base 00001060 Jan 20 10:30:42 lccmay8 kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 Jan 20 10:30:42 lccmay8 kernel: hub 4-0:1.0: USB hub found Jan 20 10:30:42 lccmay8 kernel: hub 4-0:1.0: 2 ports detected Jan 20 10:30:42 lccmay8 kernel: ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 23 (level, low) -> IRQ 225 Jan 20 10:30:42 lccmay8 kernel: uhci_hcd 0000:01:04.4: UHCI Host Controller Jan 20 10:30:42 lccmay8 kernel: uhci_hcd 0000:01:04.4: irq 225, io base 00003800 Jan 20 10:30:42 lccmay8 kernel: uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 5 Jan 20 10:30:42 lccmay8 kernel: uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports Jan 20 10:30:42 lccmay8 kernel: hub 5-0:1.0: USB hub found Jan 20 10:30:42 lccmay8 kernel: hub 5-0:1.0: 2 ports detected Jan 20 10:30:42 lccmay8 kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 201 Jan 20 10:30:42 lccmay8 kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller Jan 20 10:30:42 lccmay8 kernel: ehci_hcd 0000:00:1d.7: irq 201, pci mem f8820000 Jan 20 10:30:42 lccmay8 kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6 Jan 20 10:30:42 lccmay8 kernel: ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 Jan 20 10:30:42 lccmay8 kernel: hub 6-0:1.0: USB hub found Jan 20 10:30:42 lccmay8 kernel: hub 6-0:1.0: 8 ports detected Jan 20 10:30:42 lccmay8 kernel: md: Autodetecting RAID arrays. Jan 20 10:30:42 lccmay8 kernel: md: autorun ... Jan 20 10:30:43 lccmay8 kernel: md: ... autorun DONE. Jan 20 10:30:43 lccmay8 kernel: usb 5-1: new full speed USB device using address 2 Jan 20 10:30:43 lccmay8 kernel: input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1 Jan 20 10:30:43 lccmay8 kernel: input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1 Jan 20 10:30:43 lccmay8 kernel: usb 5-2: new full speed USB device using address 3 Jan 20 10:30:43 lccmay8 kernel: hub 5-2:1.0: USB hub found Jan 20 10:30:43 lccmay8 kernel: hub 5-2:1.0: 7 ports detected Jan 20 10:30:43 lccmay8 kernel: NET: Registered protocol family 10 Jan 20 10:30:43 lccmay8 kernel: Disabled Privacy Extensions on device c0353520(lo) Jan 20 10:30:43 lccmay8 kernel: IPv6 over IPv4 tunneling driver Jan 20 10:30:43 lccmay8 kernel: mtrr: type mismatch for d8000000,2000000 old: uncachable new: write-combining Jan 20 10:30:43 lccmay8 kernel: ACPI: Power Button (FF) [PWRF] Jan 20 10:30:43 lccmay8 kernel: EXT3 FS on cciss/c0d0p3, internal journal Jan 20 10:30:43 lccmay8 kernel: device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com Jan 20 10:30:43 lccmay8 kernel: kjournald starting. Commit interval 5 seconds Jan 20 10:30:43 lccmay8 kernel: EXT3 FS on cciss/c0d0p1, internal journal Jan 20 10:30:43 lccmay8 kernel: EXT3-fs: mounted filesystem with ordered data mode. Jan 20 10:30:43 lccmay8 kernel: Adding 4096564k swap on /dev/cciss/c0d0p2. Priority:-1 extents:1 Jan 20 10:30:43 lccmay8 kernel: IA-32 Microcode Update Driver: v1.14 Jan 20 10:30:43 lccmay8 kernel: microcode: CPU1 updated from revision 0xb3 to 0xb6, date = 07132007 Jan 20 10:30:43 lccmay8 kernel: microcode: CPU2 updated from revision 0xb3 to 0xb6, date = 07132007 Jan 20 10:30:43 lccmay8 kernel: microcode: CPU3 updated from revision 0xb3 to 0xb6, date = 07132007 Jan 20 10:30:43 lccmay8 kernel: microcode: CPU0 updated from revision 0xb3 to 0xb6, date = 07132007 Jan 20 10:30:43 lccmay8 kernel: IA-32 Microcode Update Driver v1.14 unregistered Jan 20 10:30:43 lccmay8 kernel: ip_tables: (C) 2000-2002 Netfilter core team Jan 20 10:30:43 lccmay8 kernel: ip_tables: (C) 2000-2002 Netfilter core team Jan 20 10:30:43 lccmay8 kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready Jan 20 10:30:43 lccmay8 kernel: tg3: eth0: Link is up at 100 Mbps, full duplex. Jan 20 10:30:44 lccmay8 kernel: tg3: eth0: Flow control is off for TX and off for RX. Jan 20 10:30:44 lccmay8 kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jan 20 10:30:44 lccmay8 kernel: lp: driver loaded but no devices found Jan 20 10:30:44 lccmay8 kernel: mtrr: type mismatch for d8000000,2000000 old: uncachable new: write-combining Jan 20 10:34:07 lccmay8 login(pam_unix)[27496]: session opened for user root by LOGIN(uid=0) Jan 20 10:34:07 lccmay8 -- root[27496]: ROOT LOGIN ON tty1