Bootdata ok (command line is ro root=/dev/VolGroup00/LogVol00 rhgb quiet) Linux version 2.6.9-67.ELsmp (mockbuild@builder10.centos.org) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-9)) #1 SMP Fri Nov 16 12:49:06 EST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000d7e66000 (usable) BIOS-e820: 00000000d7e66000 - 00000000d7e6e000 (ACPI data) BIOS-e820: 00000000d7e6e000 - 00000000d7e6f000 (usable) BIOS-e820: 00000000d7e6f000 - 00000000d8000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000127fff000 (usable) ACPI: RSDP (v002 HP ) @ 0x00000000000f4f00 ACPI: XSDT (v001 HP ProLiant 0x00000002 Ò 0x0000162e) @ 0x00000000d7e667c0 ACPI: FADT (v003 HP ProLiant 0x00000002 Ò 0x0000162e) @ 0x00000000d7e66840 ACPI: SPCR (v001 HP SPCRRBSU 0x00000001 Ò 0x0000162e) @ 0x00000000d7e66140 ACPI: MCFG (v001 HP ProLiant 0x00000001 0x00000000) @ 0x00000000d7e661c0 ACPI: HPET (v001 HP ProLiant 0x00000002 Ò 0x0000162e) @ 0x00000000d7e66200 ACPI: SPMI (v005 HP ProLiant 0x00000001 Ò 0x0000162e) @ 0x00000000d7e66240 ACPI: ERST (v001 HP ProLiant 0x00000001 Ò 0x0000162e) @ 0x00000000d7e66280 ACPI: MADT (v001 HP ProLiant 0x00000002 0x00000000) @ 0x00000000d7e66480 ACPI: FFFF (v001 HP ProLiant 0x00000001 Ò 0x0000162e) @ 0x00000000d7e66540 ACPI: BERT (v001 HP ProLiant 0x00000001 Ò 0x0000162e) @ 0x00000000d7e666c0 ACPI: HEST (v001 HP ProLiant 0x00000001 Ò 0x0000162e) @ 0x00000000d7e66700 ACPI: DSDT (v001 HP DSDT 0x00000001 INTL 0x20030228) @ 0x0000000000000000 No NUMA configuration found Faking a node at 0000000000000000-0000000127fff000 Bootmem setup node 0 0000000000000000-0000000127fff000 On node 0 totalpages: 1212415 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 1208319 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.4 present. ServerWorks chipset detected. Disabling timer routing over 8254. ACPI: PM-Timer IO Port: 0x908 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 16 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) Processor #2 6:15 APIC version 16 ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 16 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) Processor #3 6:15 APIC version 16 ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) Setting APIC routing to flat ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: HPET id: 0x10228201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at dc000000 (gap: d8000000:26c00000) Checking aperture... Built 1 zonelists Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet console=tty0 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 14.318180 MHz HPET timer. time.c: Detected 2128.003 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Placing software IO TLB between 0x1ca2000 - 0x5ca2000 Memory: 4040724k/4849660k available (2126k kernel code, 0k reserved, 1313k data, 212k init) Calibrating delay using timer specific routine.. 4259.16 BogoMIPS (lpj=2129580) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 (order: 0, 4096 bytes) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K using mwait in idle threads. CPU0: Physical Processor ID: 0 CPU0: Processor Core ID: 0 CPU0: Initial APIC ID: 0 Using IO APIC NMI watchdog CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU0: Physical Processor ID: 0 CPU0: Processor Core ID: 0 CPU0: Initial APIC ID: 0 CPU0: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz stepping 0b per-CPU timeslice cutoff: 4095.75 usecs. task migration cache decay timeout: 4 msecs. Booting processor 1/2 rip 6000 rsp 100d7e05f58 Initializing CPU#1 Calibrating delay using timer specific routine.. 4256.04 BogoMIPS (lpj=2128021) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU1: Physical Processor ID: 0 CPU1: Processor Core ID: 2 CPU1: Initial APIC ID: 2 Intel(R) Xeon(R) CPU X3210 @ 2.13GHz stepping 0b Booting processor 2/1 rip 6000 rsp 100d7e3df58 Initializing CPU#2 Calibrating delay using timer specific routine.. 4255.98 BogoMIPS (lpj=2127990) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU2: Physical Processor ID: 0 CPU2: Processor Core ID: 1 CPU2: Initial APIC ID: 1 Intel(R) Xeon(R) CPU X3210 @ 2.13GHz stepping 0b Booting processor 3/3 rip 6000 rsp 10037e33f58 Initializing CPU#3 Calibrating delay using timer specific routine.. 4256.01 BogoMIPS (lpj=2128005) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU3: Physical Processor ID: 0 CPU3: Processor Core ID: 3 CPU3: Initial APIC ID: 3 Intel(R) Xeon(R) CPU X3210 @ 2.13GHz stepping 0b Total of 4 processors activated (17027.19 BogoMIPS). activating NMI Watchdog ... done. testing NMI watchdog ... OK. Using local APIC timer interrupts. Detected 16.625 MHz APIC timer. checking TSC synchronization across 4 CPUs: passed. Brought up 4 CPUs time.c: Using HPET/TSC based timekeeping. checking if image is initramfs... it is NET: Registered protocol family 16 PCI: Using configuration type 1 PCI: Using MMCONFIG at e0000000 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHE.BCME._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPE2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPE3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPE4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPE5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG2._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *7 10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 *11) usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 GSI 17 sharing vector 0xB1 and IRQ 17 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 177 GSI 18 sharing vector 0xB9 and IRQ 18 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 185 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169 GSI 19 sharing vector 0xC1 and IRQ 19 ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 193 GSI 20 sharing vector 0xC9 and IRQ 20 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 201 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 201 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 201 ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 21 (level, low) -> IRQ 201 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 201 GSI 21 sharing vector 0xD1 and IRQ 21 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 20 (level, low) -> IRQ 209 ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 20 (level, low) -> IRQ 209 ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI Interrupt 0000:03:04.1[B] -> GSI 17 (level, low) -> IRQ 193 ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 21 (level, low) -> IRQ 201 GSI 22 sharing vector 0xD9 and IRQ 22 ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 22 (level, low) -> IRQ 217 GSI 23 sharing vector 0xE1 and IRQ 23 ACPI: PCI Interrupt 0000:01:04.2[B] -> GSI 23 (level, low) -> IRQ 225 ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 23 (level, low) -> IRQ 225 ACPI: PCI Interrupt 0000:01:04.6[A] -> GSI 22 (level, low) -> IRQ 217 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1232458790.589:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 841309068087E909 - User ID: CentOS (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU0] (supports C1) ACPI: Processor [CPU1] (supports C1) ACPI: Processor [CPU2] (supports C1) ACPI: Processor [CPU3] (supports C1) ACPI: Thermal Zone [THM0] (8 C) Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... Probing IDE interface ide1... Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 262144 (order: 10, 4194304 bytes) TCP: Hash tables configured (established 262144 bind 262144) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI wakeup devices: ACPI: (supports S0 S4 S5) Freeing unused kernel memory: 212k freed SCSI subsystem initialized HP CISS Driver (v 2.6.16.RH1) cciss: Device 0x3230 has been found at bus 21 dev 0 func 0 ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 169 MSI INIT SUCCESS cciss: using DAC cycles blocks= 20481599 block_size= 512 heads= 255, sectors= 32, cylinders= 2510 Using cfq io scheduler blocks= 20481599 block_size= 512 heads= 255, sectors= 32, cylinders= 2510 cciss/c0d0: p1 p2 libata version 2.00 loaded. ata_piix 0000:00:1f.2: version 2.00ac7 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 20 (level, low) -> IRQ 209 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x1080 ctl 0x108A bmdma 0x10A0 irq 209 ata2: SATA max UDMA/133 cmd 0x1090 ctl 0x109A bmdma 0x10A8 irq 209 scsi0 : ata_piix scsi1 : ata_piix ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 20 (level, low) -> IRQ 209 PCI: Setting latency timer of device 0000:00:1f.5 to 64 ata3: SATA max UDMA/133 cmd 0x10C0 ctl 0x10CA bmdma 0x10E0 irq 209 ata4: SATA max UDMA/133 cmd 0x10D0 ctl 0x10DA bmdma 0x10E8 irq 209 scsi2 : ata_piix ata3.00: ATAPI, max UDMA/33 ata3.00: applying bridge limits ata3.00: configured for UDMA/33 scsi3 : ata_piix Vendor: HL-DT-ST Model: RW/DVD GCC-M10N Rev: 2.02 Type: CD-ROM ANSI SCSI revision: 05 device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 Attached scsi CD-ROM sr0 at scsi2, channel 0, id 0, lun 0 inserting floppy driver for 2.6.9-67.ELsmp Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found tg3.c:v3.77 (May 31, 2007) ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 16 (level, low) -> IRQ 169 divert: allocating divert_blk for eth0 eth0: Tigon3 [partno(N/A) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:1f:29:bd:58:5c eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76148000] dma_mask[40-bit] ACPI: PCI Interrupt 0000:03:04.1[B] -> GSI 17 (level, low) -> IRQ 193 divert: allocating divert_blk for eth1 eth1: Tigon3 [partno(N/A) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:1f:29:bd:58:5d eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth1: dma_rwctrl[76148000] dma_mask[40-bit] hw_random: cannot enable RNG, aborting USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 201 uhci_hcd 0000:00:1d.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 201, io base 0000000000001000 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 201 uhci_hcd 0000:00:1d.1: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 201, io base 0000000000001020 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 201 uhci_hcd 0000:00:1d.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 201, io base 0000000000001040 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 21 (level, low) -> IRQ 201 uhci_hcd 0000:00:1d.3: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: irq 201, io base 0000000000001060 uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 23 (level, low) -> IRQ 225 uhci_hcd 0000:01:04.4: UHCI Host Controller uhci_hcd 0000:01:04.4: irq 225, io base 0000000000003800 uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 5 uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 201 ehci_hcd 0000:00:1d.7: EHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 201, pci mem ffffff000001a000 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 6-0:1.0: USB hub found hub 6-0:1.0: 8 ports detected md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. usb 5-1: new full speed USB device using address 2 input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1 input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1 usb 5-2: new full speed USB device using address 3 hub 5-2:1.0: USB hub found hub 5-2:1.0: 7 ports detected NET: Registered protocol family 10 Disabled Privacy Extensions on device ffffffff8040d1a0(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 mtrr: type mismatch for d8000000,2000000 old: uncachable new: write-combining ACPI: Power Button (FF) [PWRF] EXT3 FS on dm-0, internal journal loop: loaded (max 8 devices) kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d0p1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 IA-32 Microcode Update Driver: v1.14 microcode: No new microdata for cpu 2 microcode: No new microdata for cpu 3 microcode: No new microdata for cpu 1 microcode: No new microdata for cpu 0 IA-32 Microcode Update Driver v1.14 unregistered Linux Kernel Card Services options: [pci] [cardbus] [pm] ip_tables: (C) 2000-2002 Netfilter core team ip_tables: (C) 2000-2002 Netfilter core team ADDRCONF(NETDEV_UP): eth0: link is not ready tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is off for TX and off for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready lp: driver loaded but no devices found eth0: no IPv6 routers present mtrr: type mismatch for d8000000,2000000 old: uncachable new: write-combining